| Message ID | 20221030073232.22726-10-marijn.suijten@somainline.org (mailing list archive) |
|---|---|
| State | Accepted |
| Headers | show |
| Series | arm64: dts: qcom: sm6350: SD Card fixes, pm6350 keys and touchscreen for PDX213 | expand |
On 30.10.2022 08:32, Marijn Suijten wrote: > Use the generic samsung,s6sy761 touchscreen driver for this device, > together with a few pins and regulators to power it up correctly. > > Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> > --- Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Konrad > .../qcom/sm6350-sony-xperia-lena-pdx213.dts | 41 +++++++++++++++++++ > 1 file changed, 41 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts > index 6eb1d4e5e60f..20f35623d1ef 100644 > --- a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts > +++ b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts > @@ -43,6 +43,15 @@ key-volume-down { > gpios = <&pm6350_gpios 2 GPIO_ACTIVE_LOW>; > }; > }; > + > + touch_en_vreg: touch-en-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "touch_en_vreg"; > + gpio = <&tlmm 10 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + > + vin-supply = <&pm6350_l6>; > + }; > }; > > &apps_rsc { > @@ -280,6 +289,23 @@ &gpi_dma1 { > status = "okay"; > }; > > +&i2c8 { > + clock-frequency = <400000>; > + status = "okay"; > + > + touchscreen@48 { > + compatible = "samsung,s6sy761"; > + reg = <0x48>; > + interrupt-parent = <&tlmm>; > + interrupts = <22 0x2008>; > + vdd-supply = <&pm6350_l11>; > + avdd-supply = <&touch_en_vreg>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&ts_int_default &ts_active>; > + }; > +}; > + > &pm6350_gpios { > gpio_keys_state: gpio-keys-state { > key-volume-down-pins { > @@ -334,6 +360,21 @@ &sdhc_2 { > > &tlmm { > gpio-reserved-ranges = <13 4>, <45 2>, <56 2>; > + > + ts_active: ts-active-state { > + pins = "gpio21"; > + function = "gpio"; > + drive-strength = <8>; > + bias-pull-up; > + }; > + > + ts_int_default: ts-int-default-state { > + pins = "gpio22"; > + function = "gpio"; > + drive-strength = <2>; > + bias-disable; > + input-enable; > + }; > }; > > &usb_1 {
diff --git a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts index 6eb1d4e5e60f..20f35623d1ef 100644 --- a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts +++ b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts @@ -43,6 +43,15 @@ key-volume-down { gpios = <&pm6350_gpios 2 GPIO_ACTIVE_LOW>; }; }; + + touch_en_vreg: touch-en-regulator { + compatible = "regulator-fixed"; + regulator-name = "touch_en_vreg"; + gpio = <&tlmm 10 GPIO_ACTIVE_HIGH>; + enable-active-high; + + vin-supply = <&pm6350_l6>; + }; }; &apps_rsc { @@ -280,6 +289,23 @@ &gpi_dma1 { status = "okay"; }; +&i2c8 { + clock-frequency = <400000>; + status = "okay"; + + touchscreen@48 { + compatible = "samsung,s6sy761"; + reg = <0x48>; + interrupt-parent = <&tlmm>; + interrupts = <22 0x2008>; + vdd-supply = <&pm6350_l11>; + avdd-supply = <&touch_en_vreg>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_default &ts_active>; + }; +}; + &pm6350_gpios { gpio_keys_state: gpio-keys-state { key-volume-down-pins { @@ -334,6 +360,21 @@ &sdhc_2 { &tlmm { gpio-reserved-ranges = <13 4>, <45 2>, <56 2>; + + ts_active: ts-active-state { + pins = "gpio21"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + ts_int_default: ts-int-default-state { + pins = "gpio22"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + input-enable; + }; }; &usb_1 {
Use the generic samsung,s6sy761 touchscreen driver for this device, together with a few pins and regulators to power it up correctly. Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> --- .../qcom/sm6350-sony-xperia-lena-pdx213.dts | 41 +++++++++++++++++++ 1 file changed, 41 insertions(+)