From patchwork Sun Oct 30 09:42:56 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Iskren Chernev X-Patchwork-Id: 13025044 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 58B54C38A02 for ; Sun, 30 Oct 2022 09:44:05 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S230115AbiJ3Jnz (ORCPT ); Sun, 30 Oct 2022 05:43:55 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:41746 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S230020AbiJ3Jnc (ORCPT ); Sun, 30 Oct 2022 05:43:32 -0400 Received: from mail-wm1-x329.google.com (mail-wm1-x329.google.com [IPv6:2a00:1450:4864:20::329]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id B7583D128; Sun, 30 Oct 2022 02:43:24 -0700 (PDT) Received: by mail-wm1-x329.google.com with SMTP id v130-20020a1cac88000000b003bcde03bd44so9088507wme.5; Sun, 30 Oct 2022 02:43:24 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=QKLnyS1dI/VsC5RjU6rtIktExiExbn9qlM4kF/V4ru8=; b=imswqNBk7/ppbSvhOXm9lkvmZOiW58fdVDm3s9RBMTq2G+ZHknGO3uufh7PALfcEVf qcCw+Dyza1AXK0bawgxqOxqzXKS5B43e6BesgyP5k1zSsQbd2sPyGvkx5i3Gyw28vIk9 dNZmUjnwhpHdrqchBh2ln6I4ma5PFwBPcYkZ9n/RhYlDKSz0CPmWarlXtZSKvmdxWtrl U8euep+V9TfQfpKSU3lEUO+OWcZmGDFWW+p4FQT/BNRI8eN1iSSOF3MVKj/BizRw8BD7 QgpCZrIQfnmbnsBx4vGKpW5Q6Xwzqsk96QyfG0Mldl0LC6tF4U4/ors9vSBijLz99mIk ajiA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=QKLnyS1dI/VsC5RjU6rtIktExiExbn9qlM4kF/V4ru8=; b=VtnyU4E/pEbDS3JVZRZUW2NyYjC59+3DnB2uhN0HvM4csLAPjEpu7IEWjQJwx93txh 1BFClPROwElc17n/ALSj9z2xgQ3N3BcVkGFmZKTv+N3kEYO8dSJyz0YN/+ZrAMV1joK8 aozyNbO8Nnnx3eG9BUd5w/ClsnqVEXToG6++zy8vntBTxQYM4bb7+b4H9VcDwmVeZkJo DlOxMwfdCrARo+TdY1sC52R5sbJ//WdFqgVZzqRohLHF+gFGwfSSPthghKI2FqvWhT/M XA6gm/tLNpNnBML0nlu0WL8OJZYSqWuKySmKCJBBiB1cwqbbeiLCQ2zoKkrCS/wWE82r ivew== X-Gm-Message-State: ACrzQf2b7Wwil7dih9NXo8w2U2EiGZt23fzm7dt1bPae46pjjsDNRlXB u4BGk875mxYLI7c1Gpfgxr8= X-Google-Smtp-Source: AMsMyM7xKY50gq51AwQGooCmzb92oqhjWfoqtpJzjWJpuBNE0o4ojWB2Sp43spzNn4HuLN/GV8Zjmg== X-Received: by 2002:a05:600c:231a:b0:3cf:69d4:72d6 with SMTP id 26-20020a05600c231a00b003cf69d472d6mr2708556wmo.32.1667123002926; Sun, 30 Oct 2022 02:43:22 -0700 (PDT) Received: from localhost ([77.78.20.135]) by smtp.gmail.com with ESMTPSA id h5-20020adff185000000b00236863c02f5sm3670568wro.96.2022.10.30.02.43.21 (version=TLS1_3 cipher=TLS_AES_128_GCM_SHA256 bits=128/128); Sun, 30 Oct 2022 02:43:22 -0700 (PDT) From: Iskren Chernev To: Krzysztof Kozlowski , Bjorn Andersson , Rob Herring Cc: phone-devel@vger.kernel.org, ~postmarketos/upstreaming@lists.sr.ht, linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, Iskren Chernev , Andy Gross , Konrad Dybcio , Krzysztof Kozlowski , linux-kernel@vger.kernel.org Subject: [PATCH v5 6/8] arm64: dts: qcom: sm6115: Add basic soc dtsi Date: Sun, 30 Oct 2022 11:42:56 +0200 Message-Id: <20221030094258.486428-7-iskren.chernev@gmail.com> X-Mailer: git-send-email 2.38.1 In-Reply-To: <20221030094258.486428-1-iskren.chernev@gmail.com> References: <20221030094258.486428-1-iskren.chernev@gmail.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org Add support for Qualcomm SM6115 SoC. This includes: - GCC - Pinctrl - RPM (CC+PD) - USB - MMC - UFS Signed-off-by: Iskren Chernev Reviewed-by: Konrad Dybcio --- arch/arm64/boot/dts/qcom/sm6115.dtsi | 854 +++++++++++++++++++++++++++ 1 file changed, 854 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sm6115.dtsi diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi new file mode 100644 index 000000000000..0340ed21be05 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi @@ -0,0 +1,854 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (c) 2021, Iskren Chernev + */ + +#include +#include +#include +#include +#include + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "qcom,kryo260"; + reg = <0x0 0x0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "qcom,kryo260"; + reg = <0x0 0x1>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "qcom,kryo260"; + reg = <0x0 0x2>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "qcom,kryo260"; + reg = <0x0 0x3>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU4: cpu@100 { + device_type = "cpu"; + compatible = "qcom,kryo260"; + reg = <0x0 0x100>; + enable-method = "psci"; + capacity-dmips-mhz = <1638>; + dynamic-power-coefficient = <282>; + next-level-cache = <&L2_1>; + L2_1: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + CPU5: cpu@101 { + device_type = "cpu"; + compatible = "qcom,kryo260"; + reg = <0x0 0x101>; + capacity-dmips-mhz = <1638>; + dynamic-power-coefficient = <282>; + enable-method = "psci"; + next-level-cache = <&L2_1>; + }; + + CPU6: cpu@102 { + device_type = "cpu"; + compatible = "qcom,kryo260"; + reg = <0x0 0x102>; + capacity-dmips-mhz = <1638>; + dynamic-power-coefficient = <282>; + enable-method = "psci"; + next-level-cache = <&L2_1>; + }; + + CPU7: cpu@103 { + device_type = "cpu"; + compatible = "qcom,kryo260"; + reg = <0x0 0x103>; + capacity-dmips-mhz = <1638>; + dynamic-power-coefficient = <282>; + enable-method = "psci"; + next-level-cache = <&L2_1>; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + }; + + cluster1 { + core0 { + cpu = <&CPU4>; + }; + + core1 { + cpu = <&CPU5>; + }; + + core2 { + cpu = <&CPU6>; + }; + + core3 { + cpu = <&CPU7>; + }; + }; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-sm6115", "qcom,scm"; + #reset-cells = <1>; + }; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0 0x80000000 0 0>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = ; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hyp_mem: memory@45700000 { + reg = <0x0 0x45700000 0x0 0x600000>; + no-map; + }; + + xbl_aop_mem: memory@45e00000 { + reg = <0x0 0x45e00000 0x0 0x140000>; + no-map; + }; + + sec_apps_mem: memory@45fff000 { + reg = <0x0 0x45fff000 0x0 0x1000>; + no-map; + }; + + smem_mem: memory@46000000 { + compatible = "qcom,smem"; + reg = <0x0 0x46000000 0x0 0x200000>; + no-map; + + hwlocks = <&tcsr_mutex 3>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + }; + + cdsp_sec_mem: memory@46200000 { + reg = <0x0 0x46200000 0x0 0x1e00000>; + no-map; + }; + + pil_modem_mem: memory@4ab00000 { + reg = <0x0 0x4ab00000 0x0 0x6900000>; + no-map; + }; + + pil_video_mem: memory@51400000 { + reg = <0x0 0x51400000 0x0 0x500000>; + no-map; + }; + + wlan_msa_mem: memory@51900000 { + reg = <0x0 0x51900000 0x0 0x100000>; + no-map; + }; + + pil_cdsp_mem: memory@51a00000 { + reg = <0x0 0x51a00000 0x0 0x1e00000>; + no-map; + }; + + pil_adsp_mem: memory@53800000 { + reg = <0x0 0x53800000 0x0 0x2800000>; + no-map; + }; + + pil_ipa_fw_mem: memory@56100000 { + reg = <0x0 0x56100000 0x0 0x10000>; + no-map; + }; + + pil_ipa_gsi_mem: memory@56110000 { + reg = <0x0 0x56110000 0x0 0x5000>; + no-map; + }; + + pil_gpu_mem: memory@56115000 { + reg = <0x0 0x56115000 0x0 0x2000>; + no-map; + }; + + cont_splash_memory: memory@5c000000 { + reg = <0x0 0x5c000000 0x0 0x00f00000>; + no-map; + }; + + dfps_data_memory: memory@5cf00000 { + reg = <0x0 0x5cf00000 0x0 0x0100000>; + no-map; + }; + + removed_mem: memory@60000000 { + reg = <0x0 0x60000000 0x0 0x3900000>; + no-map; + }; + }; + + rpm-glink { + compatible = "qcom,glink-rpm"; + + interrupts = ; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + mboxes = <&apcs_glb 0>; + + rpm_requests: rpm-requests { + compatible = "qcom,rpm-sm6115"; + qcom,glink-channels = "rpm_requests"; + + rpmcc: clock-controller { + compatible = "qcom,rpmcc-sm6115", "qcom,rpmcc"; + #clock-cells = <1>; + }; + + rpmpd: power-controller { + compatible = "qcom,sm6115-rpmpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmpd_opp_table>; + + rpmpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmpd_opp_min_svs: opp1 { + opp-level = ; + }; + + rpmpd_opp_low_svs: opp2 { + opp-level = ; + }; + + rpmpd_opp_svs: opp3 { + opp-level = ; + }; + + rpmpd_opp_svs_plus: opp4 { + opp-level = ; + }; + + rpmpd_opp_nom: opp5 { + opp-level = ; + }; + + rpmpd_opp_nom_plus: opp6 { + opp-level = ; + }; + + rpmpd_opp_turbo: opp7 { + opp-level = ; + }; + + rpmpd_opp_turbo_plus: opp8 { + opp-level = ; + }; + }; + }; + }; + }; + + soc: soc@0 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + + tcsr_mutex: hwlock@340000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x00340000 0x20000>; + #hwlock-cells = <1>; + }; + + tlmm: pinctrl@500000 { + compatible = "qcom,sm6115-tlmm"; + reg = <0x00500000 0x400000>, <0x00900000 0x400000>, <0x00d00000 0x400000>; + reg-names = "west", "south", "east"; + interrupts = ; + gpio-controller; + gpio-ranges = <&tlmm 0 0 121>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + sdc1_state_on: sdc1-on-state { + clk-pins { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <16>; + }; + + cmd-pins { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data-pins { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <10>; + }; + + rclk-pins { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc1_state_off: sdc1-off-state { + clk-pins { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd-pins { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data-pins { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <2>; + }; + + rclk-pins { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc2_state_on: sdc2-on-state { + clk-pins { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <16>; + }; + + cmd-pins { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data-pins { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + + sd-cd-pins { + pins = "gpio88"; + function = "gpio"; + bias-pull-up; + drive-strength = <2>; + }; + }; + + sdc2_state_off: sdc2-off-state { + clk-pins { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd-pins { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data-pins { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <2>; + }; + + sd-cd-pins { + pins = "gpio88"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + }; + }; + }; + + gcc: clock-controller@1400000 { + compatible = "qcom,gcc-sm6115"; + reg = <0x01400000 0x1f0000>; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>; + clock-names = "bi_tcxo", "sleep_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + usb_1_hsphy: phy@1613000 { + compatible = "qcom,sm6115-qusb2-phy"; + reg = <0x01613000 0x180>; + #phy-cells = <0>; + + clocks = <&gcc GCC_AHB2PHY_USB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + nvmem-cells = <&qusb2_hstx_trim>; + + status = "disabled"; + }; + + qfprom@1b40000 { + compatible = "qcom,sm6115-qfprom", "qcom,qfprom"; + reg = <0x01b40000 0x7000>; + #address-cells = <1>; + #size-cells = <1>; + + qusb2_hstx_trim: hstx-trim@25b { + reg = <0x25b 0x1>; + bits = <1 4>; + }; + }; + + spmi_bus: spmi@1c40000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x01c40000 0x1100>, + <0x01e00000 0x2000000>, + <0x03e00000 0x100000>, + <0x03f00000 0xa0000>, + <0x01c0a000 0x26000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = ; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + rpm_msg_ram: sram@45f0000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0x045f0000 0x7000>; + }; + + sdhc_1: mmc@4744000 { + compatible = "qcom,sm6115-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x04744000 0x1000>, <0x04745000 0x1000>, <0x04748000 0x8000>; + reg-names = "hc", "cqhci", "ice"; + + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&xo_board>, + <&gcc GCC_SDCC1_ICE_CORE_CLK>; + clock-names = "iface", "core", "xo", "ice"; + + pinctrl-0 = <&sdc1_state_on>; + pinctrl-1 = <&sdc1_state_off>; + pinctrl-names = "default", "sleep"; + + bus-width = <8>; + status = "disabled"; + }; + + sdhc_2: mmc@4784000 { + compatible = "qcom,sm6115-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x04784000 0x1000>; + reg-names = "hc"; + + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, <&gcc GCC_SDCC2_APPS_CLK>, <&xo_board>; + clock-names = "iface", "core", "xo"; + + pinctrl-0 = <&sdc2_state_on>; + pinctrl-1 = <&sdc2_state_off>; + pinctrl-names = "default", "sleep"; + + power-domains = <&rpmpd SM6115_VDDCX>; + operating-points-v2 = <&sdhc2_opp_table>; + iommus = <&apps_smmu 0x00a0 0x0>; + resets = <&gcc GCC_SDCC2_BCR>; + + bus-width = <4>; + qcom,dll-config = <0x0007642c>; + qcom,ddr-config = <0x80040868>; + status = "disabled"; + + sdhc2_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmpd_opp_low_svs>; + }; + + opp-202000000 { + opp-hz = /bits/ 64 <202000000>; + required-opps = <&rpmpd_opp_nom>; + }; + }; + }; + + ufs_mem_hc: ufs@4804000 { + compatible = "qcom,sm6115-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; + reg = <0x04804000 0x3000>, <0x04810000 0x8000>; + interrupts = ; + phys = <&ufs_mem_phy_lanes>; + phy-names = "ufsphy"; + lanes-per-direction = <1>; + #reset-cells = <1>; + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + + power-domains = <&gcc GCC_UFS_PHY_GDSC>; + iommus = <&apps_smmu 0x100 0>; + + clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_SYS_NOC_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; + clock-names = "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "ice_core_clk"; + + freq-table-hz = <50000000 200000000>, + <0 0>, + <0 0>, + <37500000 150000000>, + <75000000 300000000>, + <0 0>, + <0 0>, + <0 0>; + + status = "disabled"; + }; + + ufs_mem_phy: phy@4807000 { + compatible = "qcom,sm6115-qmp-ufs-phy"; + reg = <0x04807000 0x1c4>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_UFS_CLKREF_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + clock-names = "ref", "ref_aux"; + + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + status = "disabled"; + + ufs_mem_phy_lanes: phy@4807400 { + reg = <0x4807400 0x098>, + <0x4807600 0x130>, + <0x4807c00 0x16c>; + #phy-cells = <0>; + }; + }; + + usb_1: usb@4ef8800 { + compatible = "qcom,sm6115-dwc3", "qcom,dwc3"; + reg = <0x04ef8800 0x400>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_CLK>; + clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi", "xo"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <66666667>; + + interrupts = , + ; + interrupt-names = "hs_phy_irq", "ss_phy_irq"; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + power-domains = <&gcc GCC_USB30_PRIM_GDSC>; + qcom,select-utmi-as-pipe-clk; + status = "disabled"; + + usb_1_dwc3: usb@4e00000 { + compatible = "snps,dwc3"; + reg = <0x04e00000 0xcd00>; + interrupts = ; + phys = <&usb_1_hsphy>; + phy-names = "usb2-phy"; + iommus = <&apps_smmu 0x120 0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + snps,has-lpm-erratum; + snps,hird-threshold = /bits/ 8 <0x10>; + snps,usb3_lpm_capable; + maximum-speed = "high-speed"; + dr_mode = "peripheral"; + }; + }; + + apps_smmu: iommu@c600000 { + compatible = "qcom,sm6115-smmu-500", "arm,mmu-500"; + reg = <0x0c600000 0x80000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + }; + + apcs_glb: mailbox@f111000 { + compatible = "qcom,sm6115-apcs-hmss-global"; + reg = <0x0f111000 0x1000>; + + #mbox-cells = <1>; + }; + + timer@f120000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x0f120000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clock-frequency = <19200000>; + + frame@f121000 { + reg = <0x0f121000 0x1000>, <0x0f122000 0x1000>; + frame-number = <0>; + interrupts = , + ; + }; + + frame@f123000 { + reg = <0x0f123000 0x1000>; + frame-number = <1>; + interrupts = ; + status = "disabled"; + }; + + frame@f124000 { + reg = <0x0f124000 0x1000>; + frame-number = <2>; + interrupts = ; + status = "disabled"; + }; + + frame@f125000 { + reg = <0x0f125000 0x1000>; + frame-number = <3>; + interrupts = ; + status = "disabled"; + }; + + frame@f126000 { + reg = <0x0f126000 0x1000>; + frame-number = <4>; + interrupts = ; + status = "disabled"; + }; + + frame@f127000 { + reg = <0x0f127000 0x1000>; + frame-number = <5>; + interrupts = ; + status = "disabled"; + }; + + frame@f128000 { + reg = <0x0f128000 0x1000>; + frame-number = <6>; + interrupts = ; + status = "disabled"; + }; + }; + + intc: interrupt-controller@f200000 { + compatible = "arm,gic-v3"; + reg = <0x0f200000 0x10000>, <0x0f300000 0x100000>; + #interrupt-cells = <3>; + interrupt-controller; + interrupt-parent = <&intc>; + #redistributor-regions = <1>; + redistributor-stride = <0x0 0x20000>; + interrupts = ; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + }; +};