@@ -4826,6 +4826,20 @@ static const struct qcom_reset_map gcc_ipq8074_resets[] = {
[GCC_PCIE1_AXI_SLAVE_ARES] = { 0x76040, 4 },
[GCC_PCIE1_AHB_ARES] = { 0x76040, 5 },
[GCC_PCIE1_AXI_MASTER_STICKY_ARES] = { 0x76040, 6 },
+ [GCC_PPE_FULL_RESET] = { .reg = 0x68014, .bitmask = GENMASK(19, 16) },
+ [GCC_UNIPHY0_SOFT_RESET] = { .reg = 0x56004, .bitmask = GENMASK(13, 4) | BIT(1) },
+ [GCC_UNIPHY0_XPCS_RESET] = { 0x56004, 2 },
+ [GCC_UNIPHY1_SOFT_RESET] = { .reg = 0x56104, .bitmask = GENMASK(5, 4) | BIT(1) },
+ [GCC_UNIPHY1_XPCS_RESET] = { 0x56104, 2 },
+ [GCC_UNIPHY2_SOFT_RESET] = { .reg = 0x56204, .bitmask = GENMASK(5, 4) | BIT(1) },
+ [GCC_UNIPHY2_XPCS_RESET] = { 0x56204, 2 },
+ [GCC_EDMA_HW_RESET] = { .reg = 0x68014, .bitmask = GENMASK(21, 20) },
+ [GCC_NSSPORT1_RESET] = { .reg = 0x68014, .bitmask = BIT(24) | GENMASK(1, 0) },
+ [GCC_NSSPORT2_RESET] = { .reg = 0x68014, .bitmask = BIT(25) | GENMASK(3, 2) },
+ [GCC_NSSPORT3_RESET] = { .reg = 0x68014, .bitmask = BIT(26) | GENMASK(5, 4) },
+ [GCC_NSSPORT4_RESET] = { .reg = 0x68014, .bitmask = BIT(27) | GENMASK(9, 8) },
+ [GCC_NSSPORT5_RESET] = { .reg = 0x68014, .bitmask = BIT(28) | GENMASK(11, 10) },
+ [GCC_NSSPORT6_RESET] = { .reg = 0x68014, .bitmask = BIT(29) | GENMASK(13, 12) },
};
static struct gdsc *gcc_ipq8074_gdscs[] = {
Downstream QCA 5.4 kernel defines networking resets which are not present in the mainline kernel but are required for the networking drivers. So, port the downstream resets and avoid using magic values for mask, construct mask for resets which require multiple bits to be set/cleared. Signed-off-by: Robert Marko <robimarko@gmail.com> --- drivers/clk/qcom/gcc-ipq8074.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+)