diff mbox series

[2/3] arm64: dts: qcom: sm6375: Add ADSP&CDSP

Message ID 20221114105913.37044-3-konrad.dybcio@linaro.org (mailing list archive)
State Accepted
Commit fe6fd26aeddf99885b43807a92a7e0d44398b7b5
Headers show
Series SM6375 / PDX225 [AC]DSP DTS | expand

Commit Message

Konrad Dybcio Nov. 14, 2022, 10:59 a.m. UTC 
Add ADSP & CDSP remote processors.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm6375.dtsi | 73 ++++++++++++++++++++++++++++
 1 file changed, 73 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm6375.dtsi b/arch/arm64/boot/dts/qcom/sm6375.dtsi
index a904fe5dd9dc..ca2f99333abd 100644
--- a/arch/arm64/boot/dts/qcom/sm6375.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6375.dtsi
@@ -1358,6 +1358,79 @@  dispcc: clock-controller@5f00000 {
 			#reset-cells = <1>;
 		};
 
+		remoteproc_adsp: remoteproc@a400000 {
+			compatible = "qcom,sm6375-adsp-pas";
+			reg = <0 0x0a400000 0 0x100>;
+
+			interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "xo";
+
+			power-domains = <&rpmpd SM6375_VDD_LPI_CX>,
+					<&rpmpd SM6375_VDD_LPI_MX>;
+			power-domain-names = "lcx", "lmx";
+
+			memory-region = <&pil_adsp_mem>;
+
+			qcom,smem-states = <&smp2p_adsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_LPASS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "lpass";
+				qcom,remote-pid = <2>;
+			};
+		};
+
+		remoteproc_cdsp: remoteproc@b000000 {
+			compatible = "qcom,sm6375-cdsp-pas";
+			reg = <0x0 0x0b000000 0x0 0x100000>;
+
+			interrupts-extended = <&intc GIC_SPI 265 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "xo";
+
+			power-domains = <&rpmpd SM6375_VDDCX>;
+
+			memory-region = <&pil_cdsp_mem>;
+
+			qcom,smem-states = <&smp2p_cdsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_CDSP
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+				label = "cdsp";
+				qcom,remote-pid = <5>;
+			};
+		};
+
 		apps_smmu: iommu@c600000 {
 			compatible = "qcom,sm6375-smmu-500", "arm,mmu-500";
 			reg = <0 0x0c600000 0 0x100000>;