diff mbox series

[2/2] arm64: dts: qcom: sm8350-sagami: Wire up USB regulators and fix USB3

Message ID 20221114143642.44839-2-konrad.dybcio@linaro.org (mailing list archive)
State Accepted
Headers show
Series [1/2] arm64: dts: qcom: sm8350-sagami: Add most RPMh regulators | expand

Commit Message

Konrad Dybcio Nov. 14, 2022, 2:36 p.m. UTC 
Wire up necessary supplies to USB PHYs to enable USB3 on Sagami and
remove all the limit-to-USB2 properties.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 .../boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi   | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
index f118caab3d42..4dcaeb7f9bc8 100644
--- a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
@@ -597,25 +597,25 @@  ts_int_default: ts-int-default-state {
 &ufs_mem_hc { status = "disabled"; };
 &ufs_mem_phy { status = "disabled"; };
 
-/* TODO: Make USB3 work (perhaps needs regulators for higher-current operation?) */
 &usb_1 {
 	status = "okay";
-
-	qcom,select-utmi-as-pipe-clk;
 };
 
 &usb_1_dwc3 {
 	dr_mode = "peripheral";
-
-	maximum-speed = "high-speed";
-	phys = <&usb_1_hsphy>;
-	phy-names = "usb2-phy";
 };
 
 &usb_1_hsphy {
 	status = "okay";
+
+	vdda-pll-supply = <&pm8350_l5>;
+	vdda18-supply = <&pm8350c_l1>;
+	vdda33-supply = <&pm8350_l2>;
 };
 
 &usb_1_qmpphy {
 	status = "okay";
+
+	vdda-phy-supply = <&pm8350_l6>;
+	vdda-pll-supply = <&pm8350_l1>;
 };