| Message ID | 20221115111721.891404-3-robert.foss@linaro.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Enable Display for SM8350 | expand |
On Tue, 15 Nov 2022 12:17:11 +0100, Robert Foss wrote: > Mobile Display Subsystem (MDSS) encapsulates sub-blocks > like DPU display controller, DSI etc. Add YAML schema for MDSS device > tree bindings > > Signed-off-by: Robert Foss <robert.foss@linaro.org> > --- > .../display/msm/qcom,sm8350-mdss.yaml | 240 ++++++++++++++++++ > 1 file changed, 240 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: ./Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml: Unable to find schema file matching $id: http://devicetree.org/schemas/display/msm/mdss-common.yaml /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.example.dtb: display-subsystem@ae00000: False schema does not allow {'compatible': ['qcom,sm8350-mdss'], 'reg': [[182452224, 4096]], 'reg-names': ['mdss'], 'interconnects': [[4294967295, 7, 0, 4294967295, 1, 0], [4294967295, 8, 0, 4294967295, 1, 0]], 'interconnect-names': ['mdp0-mem', 'mdp1-mem'], 'power-domains': [[4294967295, 0]], 'resets': [[4294967295, 0]], 'clocks': [[4294967295, 0], [4294967295, 27], [4294967295, 28], [4294967295, 32]], 'clock-names': ['iface', 'bus', 'nrt_bus', 'core'], 'iommus': [[4294967295, 2080, 1026]], 'interrupts': [[0, 83, 4]], 'interrupt-controller': True, '#interrupt-cells': [[1]], '#address-cells': [[1]], '#size-cells': [[1]], 'ranges': True, 'display-controller@ae01000': {'compatible': ['qcom,sm8350-dpu'], 'reg': [[182456320, 585728], [183173120, 8200]], 'reg-names': ['mdp', 'vbif'], 'clocks': [[4294967295, 27], [4294967295, 28], [4294967295, 0], [42 94967295, 34], [4294967295, 32], [4294967295, 44]], 'clock-names': ['bus', 'nrt_bus', 'iface', 'lut', 'core', 'vsync'], 'assigned-clocks': [[4294967295, 44]], 'assigned-clock-rates': [[19200000]], 'operating-points-v2': [[1]], 'power-domains': [[4294967295, 6]], 'interrupts': [[0]], 'ports': {'#address-cells': [[1]], '#size-cells': [[0]], 'port@0': {'reg': [[0]], 'endpoint': {'remote-endpoint': [[2]], 'phandle': [[4]]}}}, 'opp-table': {'compatible': ['operating-points-v2'], 'phandle': [[1]], 'opp-200000000': {'opp-hz': [[0], [200000000]], 'required-opps': [[4294967295]]}, 'opp-300000000': {'opp-hz': [[0], [300000000]], 'required-opps': [[4294967295]]}, 'opp-345000000': {'opp-hz': [[0], [345000000]], 'required-opps': [[4294967295]]}, 'opp-460000000': {'opp-hz': [[0], [460000000]], 'required-opps': [[4294967295]]}}}, 'dsi@ae94000': {'compatible': ['qcom,mdss-dsi-ctrl'], 'reg': [[183058432, 1024]], 'reg-names': ['dsi_ctrl'], 'interrupts': [[4]], 'clocks': [[4294967295, 2], [4294967295, 5], [4294967295, 36], [4294967295, 28], [4294967295, 0], [4294967295, 27]], 'clock-names': ['byte', 'byte_intf', 'pixel', 'core', 'iface', 'bus'], 'assigned-clocks': [[4294967295, 3], [4294967295, 37]], 'assigned-clock-parents': [[3, 0], [3, 1]], 'operating-points-v2': [[4294967295]], 'power-domains': [[4294967295, 6]], 'phys': [[3]], 'phy-names': ['dsi'], 'ports': {'#address-cells': [[1]], '#size-cells': [[0]], 'port@0': {'reg': [[0]], 'endpoint': {'remote-endpoint': [[4]], 'phandle': [[2]]}}, 'port@1': {'reg': [[1]], 'endpoint': {}}}}, 'phy@ae94400': {'compatible': ['qcom,dsi-phy-5nm-8350'], 'reg': [[183059456, 512], [183059968, 640], [183060736, 608]], 'reg-names': ['dsi_phy', 'dsi_phy_lane', 'dsi_pll'], '#clock-cells': [[1]], '#phy-cells': [[0]], 'clocks': [[4294967295, 0], [4294967295, 0]], 'clock-names': ['iface', 'ref'], 'vdds-supply': [[4294967295]], 'phandle': [[3]]}, '$nodename': ['display-subsystem@ae00000']} From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.example.dtb: display-subsystem@ae00000: Unevaluated properties are not allowed ('#address-cells', '#interrupt-cells', '#size-cells', 'interrupt-controller', 'interrupts', 'power-domains', 'ranges', 'reg', 'reg-names', 'resets' were unexpected) From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/patch/ This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
On Tue, Nov 15, 2022 at 12:17:11PM +0100, Robert Foss wrote: > Mobile Display Subsystem (MDSS) encapsulates sub-blocks > like DPU display controller, DSI etc. Add YAML schema for MDSS device > tree bindings > > Signed-off-by: Robert Foss <robert.foss@linaro.org> > --- > .../display/msm/qcom,sm8350-mdss.yaml | 240 ++++++++++++++++++ > 1 file changed, 240 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml > > diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml > new file mode 100644 > index 000000000000..9a0694853576 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml > @@ -0,0 +1,240 @@ > +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/msm/qcom,sm8350-mdss.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Qualcomm SM8350 Display MDSS > + > +maintainers: > + - Robert Foss <robert.foss@linaro.org> > + > +description: > + Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates Drop 'Device tree bindings for '. Describe what this h/w is. > + sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree > + bindings of MDSS are mentioned for SM8350 target. > + > +$ref: /schemas/display/msm/mdss-common.yaml# > + > +properties: > + compatible: > + items: > + - const: qcom,sm8350-mdss > + > + clocks: > + items: > + - description: Display AHB clock from gcc > + - description: Display hf axi clock > + - description: Display sf axi clock > + - description: Display core clock > + > + clock-names: > + items: > + - const: iface > + - const: bus > + - const: nrt_bus > + - const: core > + > + iommus: > + maxItems: 1 > + > + interconnects: > + maxItems: 2 > + > + interconnect-names: > + maxItems: 2 Need to define the names. > + > +patternProperties: > + "^display-controller@[0-9a-f]+$": > + type: object > + properties: > + compatible: > + const: qcom,sm8350-dpu > + > + "^dsi@[0-9a-f]+$": > + type: object > + properties: > + compatible: > + const: qcom,mdss-dsi-ctrl > + > + "^phy@[0-9a-f]+$": > + type: object > + properties: > + compatible: > + const: qcom,dsi-phy-5nm-8350 > + > +unevaluatedProperties: false > + > +examples: > + - | > + #include <dt-bindings/clock/qcom,dispcc-sm8350.h> > + #include <dt-bindings/clock/qcom,gcc-sm8350.h> > + #include <dt-bindings/clock/qcom,rpmh.h> > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + #include <dt-bindings/interconnect/qcom,sm8350.h> > + #include <dt-bindings/power/qcom-rpmpd.h> > + > + display-subsystem@ae00000 { > + compatible = "qcom,sm8350-mdss"; > + reg = <0x0ae00000 0x1000>; > + reg-names = "mdss"; > + > + interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>, > + <&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>; > + interconnect-names = "mdp0-mem", "mdp1-mem"; > + > + power-domains = <&dispcc MDSS_GDSC>; > + resets = <&dispcc DISP_CC_MDSS_CORE_BCR>; > + > + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, > + <&gcc GCC_DISP_HF_AXI_CLK>, > + <&gcc GCC_DISP_SF_AXI_CLK>, > + <&dispcc DISP_CC_MDSS_MDP_CLK>; > + clock-names = "iface", "bus", "nrt_bus", "core"; > + > + iommus = <&apps_smmu 0x820 0x402>; > + > + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-controller; > + #interrupt-cells = <1>; > + > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + display-controller@ae01000 { > + compatible = "qcom,sm8350-dpu"; > + reg = <0x0ae01000 0x8f000>, > + <0x0aeb0000 0x2008>; > + reg-names = "mdp", "vbif"; > + > + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, > + <&gcc GCC_DISP_SF_AXI_CLK>, > + <&dispcc DISP_CC_MDSS_AHB_CLK>, > + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, > + <&dispcc DISP_CC_MDSS_MDP_CLK>, > + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; > + clock-names = "bus", > + "nrt_bus", > + "iface", > + "lut", > + "core", > + "vsync"; > + > + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; > + assigned-clock-rates = <19200000>; > + > + operating-points-v2 = <&mdp_opp_table>; > + power-domains = <&rpmhpd SM8350_MMCX>; > + > + interrupt-parent = <&mdss>; > + interrupts = <0>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + dpu_intf1_out: endpoint { > + remote-endpoint = <&dsi0_in>; > + }; > + }; > + }; > + > + mdp_opp_table: opp-table { > + compatible = "operating-points-v2"; > + > + opp-200000000 { > + opp-hz = /bits/ 64 <200000000>; > + required-opps = <&rpmhpd_opp_low_svs>; > + }; > + > + opp-300000000 { > + opp-hz = /bits/ 64 <300000000>; > + required-opps = <&rpmhpd_opp_svs>; > + }; > + > + opp-345000000 { > + opp-hz = /bits/ 64 <345000000>; > + required-opps = <&rpmhpd_opp_svs_l1>; > + }; > + > + opp-460000000 { > + opp-hz = /bits/ 64 <460000000>; > + required-opps = <&rpmhpd_opp_nom>; > + }; > + }; > + }; > + > + dsi0: dsi@ae94000 { > + compatible = "qcom,mdss-dsi-ctrl"; > + reg = <0x0ae94000 0x400>; > + reg-names = "dsi_ctrl"; > + > + interrupt-parent = <&mdss>; > + interrupts = <4>; > + > + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, > + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, > + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, > + <&dispcc DISP_CC_MDSS_ESC0_CLK>, > + <&dispcc DISP_CC_MDSS_AHB_CLK>, > + <&gcc GCC_DISP_HF_AXI_CLK>; > + clock-names = "byte", > + "byte_intf", > + "pixel", > + "core", > + "iface", > + "bus"; > + > + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, > + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; > + assigned-clock-parents = <&dsi0_phy 0>, > + <&dsi0_phy 1>; > + > + operating-points-v2 = <&dsi_opp_table>; > + power-domains = <&rpmhpd SM8350_MMCX>; > + > + phys = <&dsi0_phy>; > + phy-names = "dsi"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + dsi0_in: endpoint { > + remote-endpoint = <&dpu_intf1_out>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + dsi0_out: endpoint { > + }; > + }; > + }; > + }; > + > + dsi0_phy: phy@ae94400 { I assume the phy has its own example somewhere else and its not really relevant to this binding. So drop. > + compatible = "qcom,dsi-phy-5nm-8350"; > + reg = <0x0ae94400 0x200>, > + <0x0ae94600 0x280>, > + <0x0ae94900 0x260>; > + reg-names = "dsi_phy", > + "dsi_phy_lane", > + "dsi_pll"; > + > + #clock-cells = <1>; > + #phy-cells = <0>; > + > + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, > + <&rpmhcc RPMH_CXO_CLK>; > + clock-names = "iface", "ref"; > + > + vdds-supply = <&vreg_l5b_0p88>; > + }; > + }; > +... > -- > 2.34.1 > >
On Tue, 15 Nov 2022 at 17:49, Rob Herring <robh@kernel.org> wrote: > > On Tue, Nov 15, 2022 at 12:17:11PM +0100, Robert Foss wrote: > > Mobile Display Subsystem (MDSS) encapsulates sub-blocks > > like DPU display controller, DSI etc. Add YAML schema for MDSS device > > tree bindings > > > > Signed-off-by: Robert Foss <robert.foss@linaro.org> > > --- > > .../display/msm/qcom,sm8350-mdss.yaml | 240 ++++++++++++++++++ > > 1 file changed, 240 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml > > > > diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml > > new file mode 100644 > > index 000000000000..9a0694853576 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml > > @@ -0,0 +1,240 @@ > > +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/display/msm/qcom,sm8350-mdss.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Qualcomm SM8350 Display MDSS > > + > > +maintainers: > > + - Robert Foss <robert.foss@linaro.org> > > + > > +description: > > + Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates > > Drop 'Device tree bindings for '. Describe what this h/w is. Ack > > > + sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree > > + bindings of MDSS are mentioned for SM8350 target. > > + > > +$ref: /schemas/display/msm/mdss-common.yaml# > > + > > +properties: > > + compatible: > > + items: > > + - const: qcom,sm8350-mdss > > + > > + clocks: > > + items: > > + - description: Display AHB clock from gcc > > + - description: Display hf axi clock > > + - description: Display sf axi clock > > + - description: Display core clock > > + > > + clock-names: > > + items: > > + - const: iface > > + - const: bus > > + - const: nrt_bus > > + - const: core > > + > > + iommus: > > + maxItems: 1 > > + > > + interconnects: > > + maxItems: 2 > > + > > + interconnect-names: > > + maxItems: 2 > > Need to define the names. > > > + > > +patternProperties: > > + "^display-controller@[0-9a-f]+$": > > + type: object > > + properties: > > + compatible: > > + const: qcom,sm8350-dpu > > + > > + "^dsi@[0-9a-f]+$": > > + type: object > > + properties: > > + compatible: > > + const: qcom,mdss-dsi-ctrl > > + > > + "^phy@[0-9a-f]+$": > > + type: object > > + properties: > > + compatible: > > + const: qcom,dsi-phy-5nm-8350 > > + > > +unevaluatedProperties: false > > + > > +examples: > > + - | > > + #include <dt-bindings/clock/qcom,dispcc-sm8350.h> > > + #include <dt-bindings/clock/qcom,gcc-sm8350.h> > > + #include <dt-bindings/clock/qcom,rpmh.h> > > + #include <dt-bindings/interrupt-controller/arm-gic.h> > > + #include <dt-bindings/interconnect/qcom,sm8350.h> > > + #include <dt-bindings/power/qcom-rpmpd.h> > > + > > + display-subsystem@ae00000 { > > + compatible = "qcom,sm8350-mdss"; > > + reg = <0x0ae00000 0x1000>; > > + reg-names = "mdss"; > > + > > + interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>, > > + <&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>; > > + interconnect-names = "mdp0-mem", "mdp1-mem"; > > + > > + power-domains = <&dispcc MDSS_GDSC>; > > + resets = <&dispcc DISP_CC_MDSS_CORE_BCR>; > > + > > + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, > > + <&gcc GCC_DISP_HF_AXI_CLK>, > > + <&gcc GCC_DISP_SF_AXI_CLK>, > > + <&dispcc DISP_CC_MDSS_MDP_CLK>; > > + clock-names = "iface", "bus", "nrt_bus", "core"; > > + > > + iommus = <&apps_smmu 0x820 0x402>; > > + > > + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; > > + interrupt-controller; > > + #interrupt-cells = <1>; > > + > > + #address-cells = <1>; > > + #size-cells = <1>; > > + ranges; > > + > > + display-controller@ae01000 { > > + compatible = "qcom,sm8350-dpu"; > > + reg = <0x0ae01000 0x8f000>, > > + <0x0aeb0000 0x2008>; > > + reg-names = "mdp", "vbif"; > > + > > + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, > > + <&gcc GCC_DISP_SF_AXI_CLK>, > > + <&dispcc DISP_CC_MDSS_AHB_CLK>, > > + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, > > + <&dispcc DISP_CC_MDSS_MDP_CLK>, > > + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; > > + clock-names = "bus", > > + "nrt_bus", > > + "iface", > > + "lut", > > + "core", > > + "vsync"; > > + > > + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; > > + assigned-clock-rates = <19200000>; > > + > > + operating-points-v2 = <&mdp_opp_table>; > > + power-domains = <&rpmhpd SM8350_MMCX>; > > + > > + interrupt-parent = <&mdss>; > > + interrupts = <0>; > > + > > + ports { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + port@0 { > > + reg = <0>; > > + dpu_intf1_out: endpoint { > > + remote-endpoint = <&dsi0_in>; > > + }; > > + }; > > + }; > > + > > + mdp_opp_table: opp-table { > > + compatible = "operating-points-v2"; > > + > > + opp-200000000 { > > + opp-hz = /bits/ 64 <200000000>; > > + required-opps = <&rpmhpd_opp_low_svs>; > > + }; > > + > > + opp-300000000 { > > + opp-hz = /bits/ 64 <300000000>; > > + required-opps = <&rpmhpd_opp_svs>; > > + }; > > + > > + opp-345000000 { > > + opp-hz = /bits/ 64 <345000000>; > > + required-opps = <&rpmhpd_opp_svs_l1>; > > + }; > > + > > + opp-460000000 { > > + opp-hz = /bits/ 64 <460000000>; > > + required-opps = <&rpmhpd_opp_nom>; > > + }; > > + }; > > + }; > > + > > + dsi0: dsi@ae94000 { > > + compatible = "qcom,mdss-dsi-ctrl"; > > + reg = <0x0ae94000 0x400>; > > + reg-names = "dsi_ctrl"; > > + > > + interrupt-parent = <&mdss>; > > + interrupts = <4>; > > + > > + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, > > + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, > > + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, > > + <&dispcc DISP_CC_MDSS_ESC0_CLK>, > > + <&dispcc DISP_CC_MDSS_AHB_CLK>, > > + <&gcc GCC_DISP_HF_AXI_CLK>; > > + clock-names = "byte", > > + "byte_intf", > > + "pixel", > > + "core", > > + "iface", > > + "bus"; > > + > > + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, > > + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; > > + assigned-clock-parents = <&dsi0_phy 0>, > > + <&dsi0_phy 1>; > > + > > + operating-points-v2 = <&dsi_opp_table>; > > + power-domains = <&rpmhpd SM8350_MMCX>; > > + > > + phys = <&dsi0_phy>; > > + phy-names = "dsi"; > > + > > + ports { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + port@0 { > > + reg = <0>; > > + dsi0_in: endpoint { > > + remote-endpoint = <&dpu_intf1_out>; > > + }; > > + }; > > + > > + port@1 { > > + reg = <1>; > > + dsi0_out: endpoint { > > + }; > > + }; > > + }; > > + }; > > + > > + dsi0_phy: phy@ae94400 { > > I assume the phy has its own example somewhere else and its not really > relevant to this binding. So drop. Ack. > > > + compatible = "qcom,dsi-phy-5nm-8350"; > > + reg = <0x0ae94400 0x200>, > > + <0x0ae94600 0x280>, > > + <0x0ae94900 0x260>; > > + reg-names = "dsi_phy", > > + "dsi_phy_lane", > > + "dsi_pll"; > > + > > + #clock-cells = <1>; > > + #phy-cells = <0>; > > + > > + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, > > + <&rpmhcc RPMH_CXO_CLK>; > > + clock-names = "iface", "ref"; > > + > > + vdds-supply = <&vreg_l5b_0p88>; > > + }; > > + }; > > +... > > -- > > 2.34.1 > > > >
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml new file mode 100644 index 000000000000..9a0694853576 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml @@ -0,0 +1,240 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sm8350-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM8350 Display MDSS + +maintainers: + - Robert Foss <robert.foss@linaro.org> + +description: + Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates + sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree + bindings of MDSS are mentioned for SM8350 target. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + items: + - const: qcom,sm8350-mdss + + clocks: + items: + - description: Display AHB clock from gcc + - description: Display hf axi clock + - description: Display sf axi clock + - description: Display core clock + + clock-names: + items: + - const: iface + - const: bus + - const: nrt_bus + - const: core + + iommus: + maxItems: 1 + + interconnects: + maxItems: 2 + + interconnect-names: + maxItems: 2 + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,sm8350-dpu + + "^dsi@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,mdss-dsi-ctrl + + "^phy@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,dsi-phy-5nm-8350 + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sm8350.h> + #include <dt-bindings/clock/qcom,gcc-sm8350.h> + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interconnect/qcom,sm8350.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-subsystem@ae00000 { + compatible = "qcom,sm8350-mdss"; + reg = <0x0ae00000 0x1000>; + reg-names = "mdss"; + + interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>, + <&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "mdp0-mem", "mdp1-mem"; + + power-domains = <&dispcc MDSS_GDSC>; + resets = <&dispcc DISP_CC_MDSS_CORE_BCR>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", "bus", "nrt_bus", "core"; + + iommus = <&apps_smmu 0x820 0x402>; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + display-controller@ae01000 { + compatible = "qcom,sm8350-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", + "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd SM8350_MMCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-345000000 { + opp-hz = /bits/ 64 <345000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-460000000 { + opp-hz = /bits/ 64 <460000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + dsi0: dsi@ae94000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0x0ae94000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&dsi0_phy 0>, + <&dsi0_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SM8350_MMCX>; + + phys = <&dsi0_phy>; + phy-names = "dsi"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + }; + + dsi0_phy: phy@ae94400 { + compatible = "qcom,dsi-phy-5nm-8350"; + reg = <0x0ae94400 0x200>, + <0x0ae94600 0x280>, + <0x0ae94900 0x260>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + + vdds-supply = <&vreg_l5b_0p88>; + }; + }; +...
Mobile Display Subsystem (MDSS) encapsulates sub-blocks like DPU display controller, DSI etc. Add YAML schema for MDSS device tree bindings Signed-off-by: Robert Foss <robert.foss@linaro.org> --- .../display/msm/qcom,sm8350-mdss.yaml | 240 ++++++++++++++++++ 1 file changed, 240 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml