| Message ID | 20221116103146.2556846-11-abel.vesa@linaro.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add base device tree files for SM8550 | expand |
On 16/11/2022 11:31, Abel Vesa wrote: > Add dts file for Qualcomm MTP platform which uses SM8550 SoC. > > Co-developed-by: Neil Armstrong <neil.armstrong@linaro.org> > Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> > Signed-off-by: Abel Vesa <abel.vesa@linaro.org> > --- > arch/arm64/boot/dts/qcom/Makefile | 1 + > arch/arm64/boot/dts/qcom/sm8550-mtp.dts | 419 ++++++++++++++++++++++++ > 2 files changed, 420 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/sm8550-mtp.dts > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > index afe496a93f94..b447b3082c84 100644 > --- a/arch/arm64/boot/dts/qcom/Makefile > +++ b/arch/arm64/boot/dts/qcom/Makefile > @@ -169,3 +169,4 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8350-sony-xperia-sagami-pdx215.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm8450-hdk.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm8450-qrd.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm8450-sony-xperia-nagara-pdx223.dtb > +dtb-$(CONFIG_ARCH_QCOM) += sm8550-mtp.dtb > diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts > new file mode 100644 > index 000000000000..d4c8d5b2497e > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts > @@ -0,0 +1,419 @@ > +// SPDX-License-Identifier: BSD-3-Clause > +/* > + * Copyright (c) 2022, Linaro Limited > + */ > + > +/dts-v1/; > + > +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> > +#include "sm8550.dtsi" > +#include "pm8010.dtsi" > +#include "pm8550.dtsi" > +#include "pm8550b.dtsi" > +#include "pm8550ve.dtsi" > +#include "pm8550vs.dtsi" > +#include "pmk8550.dtsi" > +#include "pmr735d.dtsi" > + > +/ { > + model = "Qualcomm Technologies, Inc. SM8550 MTP"; > + compatible = "qcom,sm8550-mtp", "qcom,sm8550"; > + > + aliases { > + serial0 = &uart7; > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > + > + vph_pwr: vph-pwr-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "vph_pwr"; > + regulator-min-microvolt = <3700000>; > + regulator-max-microvolt = <3700000>; > + > + regulator-always-on; > + regulator-boot-on; > + }; > +}; > + > +&apps_rsc { > + pm8550b-rpmh-regulators { > + compatible = "qcom,pm8550-rpmh-regulators"; > + qcom,pmic-id = "b"; > + > + vdd-bob1-supply = <&vph_pwr>; > + vdd-bob2-supply = <&vph_pwr>; > + vdd-l2-l13-l14-supply = <&vreg_bob1>; > + vdd-l3-supply = <&vreg_s4g_1p3>; > + vdd-l5-l16-supply = <&vreg_bob1>; > + vdd-l6-l7-supply = <&vreg_bob1>; > + vdd-l8-l9-supply = <&vreg_bob1>; > + vdd-l11-supply = <&vreg_s4g_1p3>; > + vdd-l12-supply = <&vreg_s6g_1p8>; > + vdd-l15-supply = <&vreg_s6g_1p8>; > + vdd-l17-supply = <&vreg_bob2>; > + > + vreg_bob1: bob1 { > + regulator-name = "vreg_bob1"; > + regulator-min-microvolt = <3296000>; > + regulator-max-microvolt = <3960000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_bob2: bob2 { > + regulator-name = "vreg_bob2"; > + regulator-min-microvolt = <2720000>; > + regulator-max-microvolt = <3960000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l1b_1p8: ldo1 { > + regulator-name = "vreg_l1b_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l2b_3p0: ldo2 { > + regulator-name = "vreg_l2b_3p0"; > + regulator-min-microvolt = <3008000>; > + regulator-max-microvolt = <3008000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l5b_3p1: ldo5 { > + regulator-name = "vreg_l5b_3p1"; > + regulator-min-microvolt = <3104000>; > + regulator-max-microvolt = <3104000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l6b_1p8: ldo6 { > + regulator-name = "vreg_l6b_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3008000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l7b_1p8: ldo7 { > + regulator-name = "vreg_l7b_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3008000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l8b_1p8: ldo8 { > + regulator-name = "vreg_l8b_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3008000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l9b_2p9: ldo9 { > + regulator-name = "vreg_l9b_2p9"; > + regulator-min-microvolt = <2960000>; > + regulator-max-microvolt = <3008000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l11b_1p2: ldo11 { > + regulator-name = "vreg_l11b_1p2"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1504000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l12b_1p8: ldo12 { > + regulator-name = "vreg_l12b_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l13b_3p0: ldo13 { > + regulator-name = "vreg_l13b_3p0"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l14b_3p2: ldo14 { > + regulator-name = "vreg_l14b_3p2"; > + regulator-min-microvolt = <3200000>; > + regulator-max-microvolt = <3200000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l15b_1p8: ldo15 { > + regulator-name = "vreg_l15b_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l16b_2p8: ldo16 { > + regulator-name = "vreg_l16b_2p8"; > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <2800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l17b_2p5: ldo17 { > + regulator-name = "vreg_l17b_2p5"; > + regulator-min-microvolt = <2504000>; > + regulator-max-microvolt = <2504000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > + > + pm8550c-rpmh-regulators { > + compatible = "qcom,pm8550vs-rpmh-regulators"; > + qcom,pmic-id = "c"; > + > + vdd-l3-supply = <&vreg_s4e_0p9>; > + > + vreg_l3c_0p91: ldo3 { > + regulator-name = "vreg_l3c_0p9"; > + regulator-min-microvolt = <880000>; > + regulator-max-microvolt = <912000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > + > + pm8550d-rpmh-regulators { > + compatible = "qcom,pm8550vs-rpmh-regulators"; > + qcom,pmic-id = "d"; > + > + vdd-l1-supply = <&vreg_s4e_0p9>; > + > + vreg_l1d_0p88: ldo1 { > + regulator-name = "vreg_l1d_0p88"; > + regulator-min-microvolt = <880000>; > + regulator-max-microvolt = <920000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > + > + pm8550e-rpmh-regulators { > + compatible = "qcom,pm8550vs-rpmh-regulators"; > + qcom,pmic-id = "e"; > + > + vdd-l1-supply = <&vreg_s4e_0p9>; > + vdd-l2-supply = <&vreg_s4e_0p9>; > + vdd-l3-supply = <&vreg_s4g_1p3>; > + vdd-s4-supply = <&vph_pwr>; > + vdd-s5-supply = <&vph_pwr>; > + > + vreg_s4e_0p9: smps4 { > + regulator-name = "vreg_s4e_0p9"; > + regulator-min-microvolt = <904000>; > + regulator-max-microvolt = <984000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_s5e_1p1: smps5 { > + regulator-name = "vreg_s5e_1p1"; > + regulator-min-microvolt = <1080000>; > + regulator-max-microvolt = <1120000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l1e_0p88: ldo1 { > + regulator-name = "vreg_l1e_0p88"; > + regulator-min-microvolt = <880000>; > + regulator-max-microvolt = <880000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l2e_0p9: ldo2 { > + regulator-name = "vreg_l2e_0p9"; > + regulator-min-microvolt = <904000>; > + regulator-max-microvolt = <970000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l3e_1p2: ldo3 { > + regulator-name = "vreg_l3e_1p2"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > + > + pm8550f-rpmh-regulators { > + compatible = "qcom,pm8550ve-rpmh-regulators"; > + qcom,pmic-id = "f"; > + > + vdd-l1-supply = <&vreg_s4e_0p9>; > + vdd-l2-supply = <&vreg_s4e_0p9>; > + vdd-l3-supply = <&vreg_s4e_0p9>; > + vdd-s4-supply = <&vph_pwr>; > + > + vreg_s4f_0p5: smps4 { > + regulator-name = "vreg_s4f_0p5"; > + regulator-min-microvolt = <500000>; > + regulator-max-microvolt = <700000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l1f_0p9: ldo1 { > + regulator-name = "vreg_l1f_0p9"; > + regulator-min-microvolt = <912000>; > + regulator-max-microvolt = <912000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l2f_0p88: ldo2 { > + regulator-name = "vreg_l2f_0p88"; > + regulator-min-microvolt = <880000>; > + regulator-max-microvolt = <912000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l3f_0p91: ldo3 { > + regulator-name = "vreg_l3f_0p91"; > + regulator-min-microvolt = <880000>; > + regulator-max-microvolt = <912000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > + > + pm8550g-rpmh-regulators { > + compatible = "qcom,pm8550vs-rpmh-regulators"; > + qcom,pmic-id = "g"; > + > + vdd-l1-supply = <&vreg_s4g_1p3>; > + vdd-l2-supply = <&vreg_s4g_1p3>; > + vdd-l3-supply = <&vreg_s4g_1p3>; > + vdd-s1-supply = <&vph_pwr>; > + vdd-s2-supply = <&vph_pwr>; > + vdd-s3-supply = <&vph_pwr>; > + vdd-s4-supply = <&vph_pwr>; > + vdd-s5-supply = <&vph_pwr>; > + vdd-s6-supply = <&vph_pwr>; > + > + vreg_s1g_1p2: smps1 { > + regulator-name = "vreg_s1g_1p2"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1300000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_s2g_0p8: smps2 { > + regulator-name = "vreg_s2g_0p8"; > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <1000000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_s3g_0p7: smps3 { > + regulator-name = "vreg_s3g_0p7"; > + regulator-min-microvolt = <300000>; > + regulator-max-microvolt = <1004000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_s4g_1p3: smps4 { > + regulator-name = "vreg_s4g_1p3"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1352000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_s5g_0p8: smps5 { > + regulator-name = "vreg_s5g_0p8"; > + regulator-min-microvolt = <500000>; > + regulator-max-microvolt = <1004000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_s6g_1p8: smps6 { > + regulator-name = "vreg_s6g_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <2000000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l1g_1p2: ldo1 { > + regulator-name = "vreg_l1g_1p2"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l2g_1p2: ldo2 { > + regulator-name = "vreg_l2g_1p2"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l3g_1p2: ldo3 { > + regulator-name = "vreg_l3g_1p2"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > +}; > + > +&pm8550_gpios { > + sdc2_card_det_n: sdc2-card-det-state { > + card-det-pins { No need to add a child node if it's just a single set of configurations. > + pins = "gpio12"; > + function = "normal"; > + input-enable; > + output-disable; > + bias-pull-up; > + power-source = <1>; /* 1.8 V */ > + }; > + }; > +}; > + > +&qupv3_id_0 { > + status = "okay"; > +}; > + > +&sdhc_2 { > + status = "okay"; > + > + cd-gpios = <&pm8550_gpios 12 GPIO_ACTIVE_LOW>; > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&sdc2_default &sdc2_card_det_n>; > + pinctrl-1 = <&sdc2_sleep &sdc2_card_det_n>; > + vmmc-supply = <&vreg_l9b_2p9>; > + vqmmc-supply = <&vreg_l8b_1p8>; > + bus-width = <4>; > + no-sdio; > + no-emmc; > +}; > + > +&tlmm { > + gpio-reserved-ranges = <32 8>; > + > + sdc2_default: sdc2-default-state { > + clk-pins { > + pins = "sdc2_clk"; > + bias-disable; > + drive-strength = <16>; > + }; > + > + cmd-pins { > + pins = "sdc2_cmd"; > + bias-pull-up; > + drive-strength = <10>; > + }; > + > + data-pins { > + pins = "sdc2_data"; > + bias-pull-up; > + drive-strength = <10>; > + }; > + }; These are really SoC pins and can go to the SoC DTSI. Konrad > +}; > + > +&uart7 { > + status = "okay"; > +};
On 16/11/2022 11:31, Abel Vesa wrote: > Add dts file for Qualcomm MTP platform which uses SM8550 SoC. > > Co-developed-by: Neil Armstrong <neil.armstrong@linaro.org> > Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> > Signed-off-by: Abel Vesa <abel.vesa@linaro.org> > --- > arch/arm64/boot/dts/qcom/Makefile | 1 + > arch/arm64/boot/dts/qcom/sm8550-mtp.dts | 419 ++++++++++++++++++++++++ > 2 files changed, 420 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/sm8550-mtp.dts Thank you for your patch. There is something to discuss/improve. > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > index afe496a93f94..b447b3082c84 100644 > --- a/arch/arm64/boot/dts/qcom/Makefile > +++ b/arch/arm64/boot/dts/qcom/Makefile > @@ -169,3 +169,4 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8350-sony-xperia-sagami-pdx215.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm8450-hdk.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm8450-qrd.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm8450-sony-xperia-nagara-pdx223.dtb > +dtb-$(CONFIG_ARCH_QCOM) += sm8550-mtp.dtb > diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts > new file mode 100644 > index 000000000000..d4c8d5b2497e > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts > @@ -0,0 +1,419 @@ > +// SPDX-License-Identifier: BSD-3-Clause > +/* > + * Copyright (c) 2022, Linaro Limited > + */ > + > +/dts-v1/; > + > +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> > +#include "sm8550.dtsi" > +#include "pm8010.dtsi" > +#include "pm8550.dtsi" > +#include "pm8550b.dtsi" > +#include "pm8550ve.dtsi" > +#include "pm8550vs.dtsi" > +#include "pmk8550.dtsi" > +#include "pmr735d.dtsi" > + > +/ { > + model = "Qualcomm Technologies, Inc. SM8550 MTP"; > + compatible = "qcom,sm8550-mtp", "qcom,sm8550"; > + > + aliases { > + serial0 = &uart7; > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > + > + vph_pwr: vph-pwr-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "vph_pwr"; > + regulator-min-microvolt = <3700000>; > + regulator-max-microvolt = <3700000>; > + > + regulator-always-on; > + regulator-boot-on; > + }; > +}; > + > +&apps_rsc { > + pm8550b-rpmh-regulators { Node name: regulators-0 > + compatible = "qcom,pm8550-rpmh-regulators"; > + qcom,pmic-id = "b"; > + > + vdd-bob1-supply = <&vph_pwr>; > + vdd-bob2-supply = <&vph_pwr>; > + vdd-l2-l13-l14-supply = <&vreg_bob1>; > + vdd-l3-supply = <&vreg_s4g_1p3>; > + vdd-l5-l16-supply = <&vreg_bob1>; > + vdd-l6-l7-supply = <&vreg_bob1>; > + vdd-l8-l9-supply = <&vreg_bob1>; > + vdd-l11-supply = <&vreg_s4g_1p3>; > + vdd-l12-supply = <&vreg_s6g_1p8>; > + vdd-l15-supply = <&vreg_s6g_1p8>; > + vdd-l17-supply = <&vreg_bob2>; > + > + vreg_bob1: bob1 { > + regulator-name = "vreg_bob1"; > + regulator-min-microvolt = <3296000>; > + regulator-max-microvolt = <3960000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_bob2: bob2 { > + regulator-name = "vreg_bob2"; > + regulator-min-microvolt = <2720000>; > + regulator-max-microvolt = <3960000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l1b_1p8: ldo1 { > + regulator-name = "vreg_l1b_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l2b_3p0: ldo2 { > + regulator-name = "vreg_l2b_3p0"; > + regulator-min-microvolt = <3008000>; > + regulator-max-microvolt = <3008000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l5b_3p1: ldo5 { > + regulator-name = "vreg_l5b_3p1"; > + regulator-min-microvolt = <3104000>; > + regulator-max-microvolt = <3104000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l6b_1p8: ldo6 { > + regulator-name = "vreg_l6b_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3008000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l7b_1p8: ldo7 { > + regulator-name = "vreg_l7b_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3008000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l8b_1p8: ldo8 { > + regulator-name = "vreg_l8b_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3008000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l9b_2p9: ldo9 { > + regulator-name = "vreg_l9b_2p9"; > + regulator-min-microvolt = <2960000>; > + regulator-max-microvolt = <3008000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l11b_1p2: ldo11 { > + regulator-name = "vreg_l11b_1p2"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1504000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l12b_1p8: ldo12 { > + regulator-name = "vreg_l12b_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l13b_3p0: ldo13 { > + regulator-name = "vreg_l13b_3p0"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l14b_3p2: ldo14 { > + regulator-name = "vreg_l14b_3p2"; > + regulator-min-microvolt = <3200000>; > + regulator-max-microvolt = <3200000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l15b_1p8: ldo15 { > + regulator-name = "vreg_l15b_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l16b_2p8: ldo16 { > + regulator-name = "vreg_l16b_2p8"; > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <2800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l17b_2p5: ldo17 { > + regulator-name = "vreg_l17b_2p5"; > + regulator-min-microvolt = <2504000>; > + regulator-max-microvolt = <2504000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > + > + pm8550c-rpmh-regulators { regulators-1 > + compatible = "qcom,pm8550vs-rpmh-regulators"; > + qcom,pmic-id = "c"; > + > + vdd-l3-supply = <&vreg_s4e_0p9>; > + > + vreg_l3c_0p91: ldo3 { > + regulator-name = "vreg_l3c_0p9"; > + regulator-min-microvolt = <880000>; > + regulator-max-microvolt = <912000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > + > + pm8550d-rpmh-regulators { regulators-2 and bindings might need updates. > + compatible = "qcom,pm8550vs-rpmh-regulators"; > + qcom,pmic-id = "d"; > + > + vdd-l1-supply = <&vreg_s4e_0p9>; > + > + vreg_l1d_0p88: ldo1 { > + regulator-name = "vreg_l1d_0p88"; > + regulator-min-microvolt = <880000>; > + regulator-max-microvolt = <920000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > + > + pm8550e-rpmh-regulators { ...and so on. (...) > + }; > +}; > + > +&pm8550_gpios { > + sdc2_card_det_n: sdc2-card-det-state { > + card-det-pins { > + pins = "gpio12"; > + function = "normal"; > + input-enable; > + output-disable; > + bias-pull-up; > + power-source = <1>; /* 1.8 V */ > + }; > + }; > +}; > + > +&qupv3_id_0 { > + status = "okay"; > +}; > + > +&sdhc_2 { > + status = "okay"; Status is always last. > + > + cd-gpios = <&pm8550_gpios 12 GPIO_ACTIVE_LOW>; > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&sdc2_default &sdc2_card_det_n>; > + pinctrl-1 = <&sdc2_sleep &sdc2_card_det_n>; > + vmmc-supply = <&vreg_l9b_2p9>; > + vqmmc-supply = <&vreg_l8b_1p8>; > + bus-width = <4>; > + no-sdio; > + no-emmc; > +}; > + > +&tlmm { > + gpio-reserved-ranges = <32 8>; > + > + sdc2_default: sdc2-default-state { > + clk-pins { > + pins = "sdc2_clk"; > + bias-disable; > + drive-strength = <16>; > + }; > + > + cmd-pins { > + pins = "sdc2_cmd"; > + bias-pull-up; > + drive-strength = <10>; > + }; > + > + data-pins { > + pins = "sdc2_data"; > + bias-pull-up; > + drive-strength = <10>; > + }; > + }; > +}; > + > +&uart7 { > + status = "okay"; > +}; Best regards, Krzysztof
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index afe496a93f94..b447b3082c84 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -169,3 +169,4 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8350-sony-xperia-sagami-pdx215.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8450-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8450-qrd.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8450-sony-xperia-nagara-pdx223.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8550-mtp.dtb diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts new file mode 100644 index 000000000000..d4c8d5b2497e --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts @@ -0,0 +1,419 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Linaro Limited + */ + +/dts-v1/; + +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sm8550.dtsi" +#include "pm8010.dtsi" +#include "pm8550.dtsi" +#include "pm8550b.dtsi" +#include "pm8550ve.dtsi" +#include "pm8550vs.dtsi" +#include "pmk8550.dtsi" +#include "pmr735d.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. SM8550 MTP"; + compatible = "qcom,sm8550-mtp", "qcom,sm8550"; + + aliases { + serial0 = &uart7; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; +}; + +&apps_rsc { + pm8550b-rpmh-regulators { + compatible = "qcom,pm8550-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-bob1-supply = <&vph_pwr>; + vdd-bob2-supply = <&vph_pwr>; + vdd-l2-l13-l14-supply = <&vreg_bob1>; + vdd-l3-supply = <&vreg_s4g_1p3>; + vdd-l5-l16-supply = <&vreg_bob1>; + vdd-l6-l7-supply = <&vreg_bob1>; + vdd-l8-l9-supply = <&vreg_bob1>; + vdd-l11-supply = <&vreg_s4g_1p3>; + vdd-l12-supply = <&vreg_s6g_1p8>; + vdd-l15-supply = <&vreg_s6g_1p8>; + vdd-l17-supply = <&vreg_bob2>; + + vreg_bob1: bob1 { + regulator-name = "vreg_bob1"; + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob2: bob2 { + regulator-name = "vreg_bob2"; + regulator-min-microvolt = <2720000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1b_1p8: ldo1 { + regulator-name = "vreg_l1b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2b_3p0: ldo2 { + regulator-name = "vreg_l2b_3p0"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5b_3p1: ldo5 { + regulator-name = "vreg_l5b_3p1"; + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6b_1p8: ldo6 { + regulator-name = "vreg_l6b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7b_1p8: ldo7 { + regulator-name = "vreg_l7b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8b_1p8: ldo8 { + regulator-name = "vreg_l8b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9b_2p9: ldo9 { + regulator-name = "vreg_l9b_2p9"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11b_1p2: ldo11 { + regulator-name = "vreg_l11b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12b_1p8: ldo12 { + regulator-name = "vreg_l12b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13b_3p0: ldo13 { + regulator-name = "vreg_l13b_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14b_3p2: ldo14 { + regulator-name = "vreg_l14b_3p2"; + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15b_1p8: ldo15 { + regulator-name = "vreg_l15b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16b_2p8: ldo16 { + regulator-name = "vreg_l16b_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17b_2p5: ldo17 { + regulator-name = "vreg_l17b_2p5"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + pm8550c-rpmh-regulators { + compatible = "qcom,pm8550vs-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-l3-supply = <&vreg_s4e_0p9>; + + vreg_l3c_0p91: ldo3 { + regulator-name = "vreg_l3c_0p9"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + pm8550d-rpmh-regulators { + compatible = "qcom,pm8550vs-rpmh-regulators"; + qcom,pmic-id = "d"; + + vdd-l1-supply = <&vreg_s4e_0p9>; + + vreg_l1d_0p88: ldo1 { + regulator-name = "vreg_l1d_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + pm8550e-rpmh-regulators { + compatible = "qcom,pm8550vs-rpmh-regulators"; + qcom,pmic-id = "e"; + + vdd-l1-supply = <&vreg_s4e_0p9>; + vdd-l2-supply = <&vreg_s4e_0p9>; + vdd-l3-supply = <&vreg_s4g_1p3>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + + vreg_s4e_0p9: smps4 { + regulator-name = "vreg_s4e_0p9"; + regulator-min-microvolt = <904000>; + regulator-max-microvolt = <984000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5e_1p1: smps5 { + regulator-name = "vreg_s5e_1p1"; + regulator-min-microvolt = <1080000>; + regulator-max-microvolt = <1120000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1e_0p88: ldo1 { + regulator-name = "vreg_l1e_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2e_0p9: ldo2 { + regulator-name = "vreg_l2e_0p9"; + regulator-min-microvolt = <904000>; + regulator-max-microvolt = <970000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3e_1p2: ldo3 { + regulator-name = "vreg_l3e_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + pm8550f-rpmh-regulators { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "f"; + + vdd-l1-supply = <&vreg_s4e_0p9>; + vdd-l2-supply = <&vreg_s4e_0p9>; + vdd-l3-supply = <&vreg_s4e_0p9>; + vdd-s4-supply = <&vph_pwr>; + + vreg_s4f_0p5: smps4 { + regulator-name = "vreg_s4f_0p5"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <700000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1f_0p9: ldo1 { + regulator-name = "vreg_l1f_0p9"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2f_0p88: ldo2 { + regulator-name = "vreg_l2f_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3f_0p91: ldo3 { + regulator-name = "vreg_l3f_0p91"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + pm8550g-rpmh-regulators { + compatible = "qcom,pm8550vs-rpmh-regulators"; + qcom,pmic-id = "g"; + + vdd-l1-supply = <&vreg_s4g_1p3>; + vdd-l2-supply = <&vreg_s4g_1p3>; + vdd-l3-supply = <&vreg_s4g_1p3>; + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + + vreg_s1g_1p2: smps1 { + regulator-name = "vreg_s1g_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s2g_0p8: smps2 { + regulator-name = "vreg_s2g_0p8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s3g_0p7: smps3 { + regulator-name = "vreg_s3g_0p7"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1004000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s4g_1p3: smps4 { + regulator-name = "vreg_s4g_1p3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1352000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5g_0p8: smps5 { + regulator-name = "vreg_s5g_0p8"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1004000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s6g_1p8: smps6 { + regulator-name = "vreg_s6g_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1g_1p2: ldo1 { + regulator-name = "vreg_l1g_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2g_1p2: ldo2 { + regulator-name = "vreg_l2g_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3g_1p2: ldo3 { + regulator-name = "vreg_l3g_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&pm8550_gpios { + sdc2_card_det_n: sdc2-card-det-state { + card-det-pins { + pins = "gpio12"; + function = "normal"; + input-enable; + output-disable; + bias-pull-up; + power-source = <1>; /* 1.8 V */ + }; + }; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&sdhc_2 { + status = "okay"; + + cd-gpios = <&pm8550_gpios 12 GPIO_ACTIVE_LOW>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_default &sdc2_card_det_n>; + pinctrl-1 = <&sdc2_sleep &sdc2_card_det_n>; + vmmc-supply = <&vreg_l9b_2p9>; + vqmmc-supply = <&vreg_l8b_1p8>; + bus-width = <4>; + no-sdio; + no-emmc; +}; + +&tlmm { + gpio-reserved-ranges = <32 8>; + + sdc2_default: sdc2-default-state { + clk-pins { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <16>; + }; + + cmd-pins { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data-pins { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + }; +}; + +&uart7 { + status = "okay"; +};