| Message ID | 20221116110515.2612515-2-abel.vesa@linaro.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | regulator: qcom-rpmh: Add support for PM8550 | expand |
On 16/11/2022 12:05, Abel Vesa wrote: > Add compatible string for PM8550 used in SM8550 boards. Use subject prefixes matching the subsystem (git log --oneline -- ...). > > Signed-off-by: Abel Vesa <abel.vesa@linaro.org> > --- > .../regulator/qcom,rpmh-regulator.yaml | 29 +++++++++++++++++-- > 1 file changed, 26 insertions(+), 3 deletions(-) > > diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml > index 90c3bda31c23..66e6bda923cf 100644 > --- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml > +++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml > @@ -47,6 +47,7 @@ description: | > For PM8350, smps1 - smps12, ldo1 - ldo10 > For PM8350C, smps1 - smps10, ldo1 - ldo13, bob > For PM8450, smps1 - smps6, ldo1 - ldo4 > + For PM8550, smps1 - smps6, ldo1 - ldo17, bob1 - bob2 > For PM8998, smps1 - smps13, ldo1 - ldo28, lvs1 - lvs2 > For PMI8998, bob > For PMR735A, smps1 - smps3, ldo1 - ldo7 > @@ -70,6 +71,9 @@ properties: > - qcom,pm8350-rpmh-regulators > - qcom,pm8350c-rpmh-regulators > - qcom,pm8450-rpmh-regulators > + - qcom,pm8550-rpmh-regulators > + - qcom,pm8550ve-rpmh-regulators > + - qcom,pm8550vs-rpmh-regulators > - qcom,pm8998-rpmh-regulators > - qcom,pmg1110-rpmh-regulators > - qcom,pmi8998-rpmh-regulators > @@ -83,7 +87,7 @@ properties: > RPMh resource name suffix used for the regulators found > on this PMIC. > $ref: /schemas/types.yaml#/definitions/string > - enum: [a, b, c, d, e, f, h, k] > + enum: [a, b, c, d, e, f, g, h, k] > > qcom,always-wait-for-ack: > description: | > @@ -107,7 +111,7 @@ properties: > regulator-allow-set-load: ["regulator-allowed-modes"] > > patternProperties: > - "^(smps|ldo|lvs)[0-9]+$": > + "^(smps|ldo|lvs|bob)[0-9]+$": > type: object > $ref: "regulator.yaml#" > description: smps/ldo regulator nodes(s). > @@ -296,8 +300,27 @@ allOf: > - qcom,pm8450-rpmh-regulators > then: > patternProperties: > - "^vdd-l[1-4]-supply$": true > + "^vdd-l[1-9]-supply$": true Does not look related to this patch - aren't you changing some other variant? > "^vdd-s[1-6]-supply$": true > + "^vdd-bob[1-2]-supply$": true Does not look related to this patch. > + > + - if: > + properties: > + compatible: > + enum: > + - qcom,pm8550-rpmh-regulators > + - qcom,pm8550ve-rpmh-regulators > + - qcom,pm8550vs-rpmh-regulators > + then: > + properties: > + vdd-l2-l13-l14-supply: true > + vdd-l5-l16-supply: true > + vdd-l6-l7-supply: true > + vdd-l8-l9-supply: true > + patternProperties: > + "^vdd-l([1-4]|1[0-7])-supply$": true > + "^vdd-s[1-6]-supply$": true > + "^vdd-bob[1-2]-supply$": true > > - if: > properties: Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml index 90c3bda31c23..66e6bda923cf 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml @@ -47,6 +47,7 @@ description: | For PM8350, smps1 - smps12, ldo1 - ldo10 For PM8350C, smps1 - smps10, ldo1 - ldo13, bob For PM8450, smps1 - smps6, ldo1 - ldo4 + For PM8550, smps1 - smps6, ldo1 - ldo17, bob1 - bob2 For PM8998, smps1 - smps13, ldo1 - ldo28, lvs1 - lvs2 For PMI8998, bob For PMR735A, smps1 - smps3, ldo1 - ldo7 @@ -70,6 +71,9 @@ properties: - qcom,pm8350-rpmh-regulators - qcom,pm8350c-rpmh-regulators - qcom,pm8450-rpmh-regulators + - qcom,pm8550-rpmh-regulators + - qcom,pm8550ve-rpmh-regulators + - qcom,pm8550vs-rpmh-regulators - qcom,pm8998-rpmh-regulators - qcom,pmg1110-rpmh-regulators - qcom,pmi8998-rpmh-regulators @@ -83,7 +87,7 @@ properties: RPMh resource name suffix used for the regulators found on this PMIC. $ref: /schemas/types.yaml#/definitions/string - enum: [a, b, c, d, e, f, h, k] + enum: [a, b, c, d, e, f, g, h, k] qcom,always-wait-for-ack: description: | @@ -107,7 +111,7 @@ properties: regulator-allow-set-load: ["regulator-allowed-modes"] patternProperties: - "^(smps|ldo|lvs)[0-9]+$": + "^(smps|ldo|lvs|bob)[0-9]+$": type: object $ref: "regulator.yaml#" description: smps/ldo regulator nodes(s). @@ -296,8 +300,27 @@ allOf: - qcom,pm8450-rpmh-regulators then: patternProperties: - "^vdd-l[1-4]-supply$": true + "^vdd-l[1-9]-supply$": true "^vdd-s[1-6]-supply$": true + "^vdd-bob[1-2]-supply$": true + + - if: + properties: + compatible: + enum: + - qcom,pm8550-rpmh-regulators + - qcom,pm8550ve-rpmh-regulators + - qcom,pm8550vs-rpmh-regulators + then: + properties: + vdd-l2-l13-l14-supply: true + vdd-l5-l16-supply: true + vdd-l6-l7-supply: true + vdd-l8-l9-supply: true + patternProperties: + "^vdd-l([1-4]|1[0-7])-supply$": true + "^vdd-s[1-6]-supply$": true + "^vdd-bob[1-2]-supply$": true - if: properties:
Add compatible string for PM8550 used in SM8550 boards. Signed-off-by: Abel Vesa <abel.vesa@linaro.org> --- .../regulator/qcom,rpmh-regulator.yaml | 29 +++++++++++++++++-- 1 file changed, 26 insertions(+), 3 deletions(-)