diff mbox series

[14/15] soc: qcom-geni-se: add more symbol definitions

Message ID 20221118122539.384993-15-brgl@bgdev.pl (mailing list archive)
State Superseded
Headers show
Series serial: qcom-geni-serial: implement support for SE DMA | expand

Commit Message

Bartosz Golaszewski Nov. 18, 2022, 12:25 p.m. UTC 
From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

The following symbols will be used when adding support for SE DMA in
the qcom geni serial driver.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
 include/linux/qcom-geni-se.h | 3 +++
 1 file changed, 3 insertions(+)

Comments

Konrad Dybcio Nov. 18, 2022, 1:35 p.m. UTC | #1 
On 18/11/2022 13:25, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> 
> The following symbols will be used when adding support for SE DMA in
> the qcom geni serial driver.
> 
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> ---
You might have added them along with the new users, but still:

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
>   include/linux/qcom-geni-se.h | 3 +++
>   1 file changed, 3 insertions(+)
> 
> diff --git a/include/linux/qcom-geni-se.h b/include/linux/qcom-geni-se.h
> index f5672785c0c4..400213daa461 100644
> --- a/include/linux/qcom-geni-se.h
> +++ b/include/linux/qcom-geni-se.h
> @@ -103,6 +103,7 @@ struct geni_se {
>   #define SE_DMA_TX_FSM_RST		0xc58
>   #define SE_DMA_RX_IRQ_STAT		0xd40
>   #define SE_DMA_RX_IRQ_CLR		0xd44
> +#define SE_DMA_RX_LEN_IN		0xd54
>   #define SE_DMA_RX_FSM_RST		0xd58
>   #define SE_HW_PARAM_0			0xe24
>   #define SE_HW_PARAM_1			0xe28
> @@ -235,6 +236,8 @@ struct geni_se {
>   #define RX_SBE				BIT(2)
>   #define RX_RESET_DONE			BIT(3)
>   #define RX_FLUSH_DONE			BIT(4)
> +#define RX_DMA_PARITY_ERR		BIT(5)
> +#define RX_DMA_BREAK			GENMASK(8, 7)
>   #define RX_GENI_GP_IRQ			GENMASK(10, 5)
>   #define RX_GENI_CANCEL_IRQ		BIT(11)
>   #define RX_GENI_GP_IRQ_EXT		GENMASK(13, 12)
diff mbox series

Patch

diff --git a/include/linux/qcom-geni-se.h b/include/linux/qcom-geni-se.h
index f5672785c0c4..400213daa461 100644
--- a/include/linux/qcom-geni-se.h
+++ b/include/linux/qcom-geni-se.h
@@ -103,6 +103,7 @@  struct geni_se {
 #define SE_DMA_TX_FSM_RST		0xc58
 #define SE_DMA_RX_IRQ_STAT		0xd40
 #define SE_DMA_RX_IRQ_CLR		0xd44
+#define SE_DMA_RX_LEN_IN		0xd54
 #define SE_DMA_RX_FSM_RST		0xd58
 #define SE_HW_PARAM_0			0xe24
 #define SE_HW_PARAM_1			0xe28
@@ -235,6 +236,8 @@  struct geni_se {
 #define RX_SBE				BIT(2)
 #define RX_RESET_DONE			BIT(3)
 #define RX_FLUSH_DONE			BIT(4)
+#define RX_DMA_PARITY_ERR		BIT(5)
+#define RX_DMA_BREAK			GENMASK(8, 7)
 #define RX_GENI_GP_IRQ			GENMASK(10, 5)
 #define RX_GENI_CANCEL_IRQ		BIT(11)
 #define RX_GENI_GP_IRQ_EXT		GENMASK(13, 12)