diff mbox series

[v2,01/15] tty: serial: qcom-geni-serial: drop unneeded forward definitions

Message ID 20221122102125.142075-2-brgl@bgdev.pl (mailing list archive)
State Superseded
Headers show
Series serial: qcom-geni-serial: implement support for SE DMA | expand

Commit Message

Bartosz Golaszewski Nov. 22, 2022, 10:21 a.m. UTC 
From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

If we shuffle the code a bit, we can drop all forward definitions of
various static functions.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 drivers/tty/serial/qcom_geni_serial.c | 79 +++++++++++++--------------
 1 file changed, 37 insertions(+), 42 deletions(-)
diff mbox series

Patch

diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index 83b66b73303a..9f2212e7b5ec 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -147,11 +147,6 @@  static const struct uart_ops qcom_geni_console_pops;
 static const struct uart_ops qcom_geni_uart_pops;
 static struct uart_driver qcom_geni_console_driver;
 static struct uart_driver qcom_geni_uart_driver;
-static int handle_rx_console(struct uart_port *uport, u32 bytes, bool drop);
-static int handle_rx_uart(struct uart_port *uport, u32 bytes, bool drop);
-static unsigned int qcom_geni_serial_tx_empty(struct uart_port *port);
-static void qcom_geni_serial_stop_rx(struct uart_port *uport);
-static void qcom_geni_serial_handle_rx(struct uart_port *uport, bool drop);
 
 #define to_dev_port(ptr, member) \
 		container_of(ptr, struct qcom_geni_serial_port, member)
@@ -590,6 +585,11 @@  static int handle_rx_uart(struct uart_port *uport, u32 bytes, bool drop)
 	return ret;
 }
 
+static unsigned int qcom_geni_serial_tx_empty(struct uart_port *uport)
+{
+	return !readl(uport->membase + SE_GENI_TX_FIFO_STATUS);
+}
+
 static void qcom_geni_serial_start_tx(struct uart_port *uport)
 {
 	u32 irq_en;
@@ -635,25 +635,29 @@  static void qcom_geni_serial_stop_tx(struct uart_port *uport)
 	writel(M_CMD_CANCEL_EN, uport->membase + SE_GENI_M_IRQ_CLEAR);
 }
 
-static void qcom_geni_serial_start_rx(struct uart_port *uport)
+static void qcom_geni_serial_handle_rx(struct uart_port *uport, bool drop)
 {
-	u32 irq_en;
 	u32 status;
+	u32 word_cnt;
+	u32 last_word_byte_cnt;
+	u32 last_word_partial;
+	u32 total_bytes;
 	struct qcom_geni_serial_port *port = to_dev_port(uport, uport);
 
-	status = readl(uport->membase + SE_GENI_STATUS);
-	if (status & S_GENI_CMD_ACTIVE)
-		qcom_geni_serial_stop_rx(uport);
-
-	geni_se_setup_s_cmd(&port->se, UART_START_READ, 0);
-
-	irq_en = readl(uport->membase + SE_GENI_S_IRQ_EN);
-	irq_en |= S_RX_FIFO_WATERMARK_EN | S_RX_FIFO_LAST_EN;
-	writel(irq_en, uport->membase + SE_GENI_S_IRQ_EN);
+	status = readl(uport->membase +	SE_GENI_RX_FIFO_STATUS);
+	word_cnt = status & RX_FIFO_WC_MSK;
+	last_word_partial = status & RX_LAST;
+	last_word_byte_cnt = (status & RX_LAST_BYTE_VALID_MSK) >>
+						RX_LAST_BYTE_VALID_SHFT;
 
-	irq_en = readl(uport->membase + SE_GENI_M_IRQ_EN);
-	irq_en |= M_RX_FIFO_WATERMARK_EN | M_RX_FIFO_LAST_EN;
-	writel(irq_en, uport->membase + SE_GENI_M_IRQ_EN);
+	if (!word_cnt)
+		return;
+	total_bytes = BYTES_PER_FIFO_WORD * (word_cnt - 1);
+	if (last_word_partial && last_word_byte_cnt)
+		total_bytes += last_word_byte_cnt;
+	else
+		total_bytes += BYTES_PER_FIFO_WORD;
+	port->handle_rx(uport, total_bytes, drop);
 }
 
 static void qcom_geni_serial_stop_rx(struct uart_port *uport)
@@ -694,29 +698,25 @@  static void qcom_geni_serial_stop_rx(struct uart_port *uport)
 		qcom_geni_serial_abort_rx(uport);
 }
 
-static void qcom_geni_serial_handle_rx(struct uart_port *uport, bool drop)
+static void qcom_geni_serial_start_rx(struct uart_port *uport)
 {
+	u32 irq_en;
 	u32 status;
-	u32 word_cnt;
-	u32 last_word_byte_cnt;
-	u32 last_word_partial;
-	u32 total_bytes;
 	struct qcom_geni_serial_port *port = to_dev_port(uport, uport);
 
-	status = readl(uport->membase +	SE_GENI_RX_FIFO_STATUS);
-	word_cnt = status & RX_FIFO_WC_MSK;
-	last_word_partial = status & RX_LAST;
-	last_word_byte_cnt = (status & RX_LAST_BYTE_VALID_MSK) >>
-						RX_LAST_BYTE_VALID_SHFT;
+	status = readl(uport->membase + SE_GENI_STATUS);
+	if (status & S_GENI_CMD_ACTIVE)
+		qcom_geni_serial_stop_rx(uport);
 
-	if (!word_cnt)
-		return;
-	total_bytes = BYTES_PER_FIFO_WORD * (word_cnt - 1);
-	if (last_word_partial && last_word_byte_cnt)
-		total_bytes += last_word_byte_cnt;
-	else
-		total_bytes += BYTES_PER_FIFO_WORD;
-	port->handle_rx(uport, total_bytes, drop);
+	geni_se_setup_s_cmd(&port->se, UART_START_READ, 0);
+
+	irq_en = readl(uport->membase + SE_GENI_S_IRQ_EN);
+	irq_en |= S_RX_FIFO_WATERMARK_EN | S_RX_FIFO_LAST_EN;
+	writel(irq_en, uport->membase + SE_GENI_S_IRQ_EN);
+
+	irq_en = readl(uport->membase + SE_GENI_M_IRQ_EN);
+	irq_en |= M_RX_FIFO_WATERMARK_EN | M_RX_FIFO_LAST_EN;
+	writel(irq_en, uport->membase + SE_GENI_M_IRQ_EN);
 }
 
 static void qcom_geni_serial_handle_tx(struct uart_port *uport, bool done,
@@ -1122,11 +1122,6 @@  static void qcom_geni_serial_set_termios(struct uart_port *uport,
 	qcom_geni_serial_start_rx(uport);
 }
 
-static unsigned int qcom_geni_serial_tx_empty(struct uart_port *uport)
-{
-	return !readl(uport->membase + SE_GENI_TX_FIFO_STATUS);
-}
-
 #ifdef CONFIG_SERIAL_QCOM_GENI_CONSOLE
 static int qcom_geni_console_setup(struct console *co, char *options)
 {