| Message ID | 20221222203636.250190-2-marijn.suijten@somainline.org (mailing list archive) |
|---|---|
| State | Accepted, archived |
| Headers | show |
| Series | arm64: dts: qcom: sm6125-seine: Configure regulators and enable SD Card | expand |
On 22.12.2022 21:36, Marijn Suijten wrote: > Configure PM6125 regulators based on availability and voltages defined > downstream, to allow powering up (and/or keeping powered) other hardware > blocks going forward. > > Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> > --- Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Konrad > .../qcom/sm6125-sony-xperia-seine-pdx201.dts | 139 ++++++++++++++++++ > 1 file changed, 139 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts > index 4e7c12863d28..4f825c55692b 100644 > --- a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts > +++ b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts > @@ -276,6 +276,145 @@ &qupv3_id_0 { > status = "okay"; > }; > > +&rpm_requests { > + regulators-0 { > + compatible = "qcom,rpm-pm6125-regulators"; > + > + vdd_l2_l3_l4-supply = <&pm6125_l7>; > + vdd_l5_l15_l19_l20_l21_l22-supply = <&pm6125_l10>; > + > + /* > + * S3/S4 is VDD_CX > + * S5 is VDD_MX/WCSS_MX > + */ > + > + pm6125_s6: s6 { > + regulator-min-microvolt = <936000>; > + regulator-max-microvolt = <1422000>; > + }; > + > + pm6125_l1: l1 { > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1256000>; > + }; > + > + pm6125_l2: l2 { > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1056000>; > + }; > + > + pm6125_l3: l3 { > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1064000>; > + }; > + > + pm6125_l4: l4 { > + regulator-min-microvolt = <872000>; > + regulator-max-microvolt = <976000>; > + }; > + > + pm6125_l5: l5 { > + regulator-min-microvolt = <1648000>; > + regulator-max-microvolt = <3104000>; > + }; > + > + pm6125_l6: l6 { > + regulator-min-microvolt = <576000>; > + regulator-max-microvolt = <656000>; > + }; > + > + pm6125_l7: l7 { > + regulator-min-microvolt = <872000>; > + regulator-max-microvolt = <976000>; > + }; > + > + pm6125_l8: l8 { > + regulator-min-microvolt = <400000>; > + regulator-max-microvolt = <728000>; > + }; > + > + pm6125_l9: l9 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1896000>; > + }; > + > + pm6125_l10: l10 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1896000>; > + }; > + > + pm6125_l11: l11 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1952000>; > + }; > + > + pm6125_l12: l12 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1996000>; > + }; > + > + pm6125_l13: l13 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1832000>; > + }; > + > + pm6125_l14: l14 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1904000>; > + }; > + > + pm6125_l15: l15 { > + regulator-min-microvolt = <3104000>; > + regulator-max-microvolt = <3232000>; > + }; > + > + pm6125_l16: l16 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1904000>; > + }; > + > + pm6125_l17: l17 { > + regulator-min-microvolt = <1248000>; > + regulator-max-microvolt = <1304000>; > + }; > + > + pm6125_l18: l18 { > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1264000>; > + }; > + > + pm6125_l19: l19 { > + regulator-min-microvolt = <1648000>; > + regulator-max-microvolt = <2952000>; > + }; > + > + pm6125_l20: l20 { > + regulator-min-microvolt = <1648000>; > + regulator-max-microvolt = <2952000>; > + }; > + > + pm6125_l21: l21 { > + regulator-min-microvolt = <2600000>; > + regulator-max-microvolt = <2856000>; > + }; > + > + pm6125_l22: l22 { > + regulator-min-microvolt = <2944000>; > + regulator-max-microvolt = <3304000>; > + }; > + > + pm6125_l23: l23 { > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3400000>; > + }; > + > + pm6125_l24: l24 { > + regulator-min-microvolt = <2944000>; > + regulator-max-microvolt = <3304000>; > + }; > + }; > +}; > + > &sdc2_off_state { > sd-cd-pins { > pins = "gpio98";
diff --git a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts index 4e7c12863d28..4f825c55692b 100644 --- a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts +++ b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts @@ -276,6 +276,145 @@ &qupv3_id_0 { status = "okay"; }; +&rpm_requests { + regulators-0 { + compatible = "qcom,rpm-pm6125-regulators"; + + vdd_l2_l3_l4-supply = <&pm6125_l7>; + vdd_l5_l15_l19_l20_l21_l22-supply = <&pm6125_l10>; + + /* + * S3/S4 is VDD_CX + * S5 is VDD_MX/WCSS_MX + */ + + pm6125_s6: s6 { + regulator-min-microvolt = <936000>; + regulator-max-microvolt = <1422000>; + }; + + pm6125_l1: l1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1256000>; + }; + + pm6125_l2: l2 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1056000>; + }; + + pm6125_l3: l3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1064000>; + }; + + pm6125_l4: l4 { + regulator-min-microvolt = <872000>; + regulator-max-microvolt = <976000>; + }; + + pm6125_l5: l5 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <3104000>; + }; + + pm6125_l6: l6 { + regulator-min-microvolt = <576000>; + regulator-max-microvolt = <656000>; + }; + + pm6125_l7: l7 { + regulator-min-microvolt = <872000>; + regulator-max-microvolt = <976000>; + }; + + pm6125_l8: l8 { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <728000>; + }; + + pm6125_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1896000>; + }; + + pm6125_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1896000>; + }; + + pm6125_l11: l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1952000>; + }; + + pm6125_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1996000>; + }; + + pm6125_l13: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1832000>; + }; + + pm6125_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1904000>; + }; + + pm6125_l15: l15 { + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3232000>; + }; + + pm6125_l16: l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1904000>; + }; + + pm6125_l17: l17 { + regulator-min-microvolt = <1248000>; + regulator-max-microvolt = <1304000>; + }; + + pm6125_l18: l18 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1264000>; + }; + + pm6125_l19: l19 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <2952000>; + }; + + pm6125_l20: l20 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <2952000>; + }; + + pm6125_l21: l21 { + regulator-min-microvolt = <2600000>; + regulator-max-microvolt = <2856000>; + }; + + pm6125_l22: l22 { + regulator-min-microvolt = <2944000>; + regulator-max-microvolt = <3304000>; + }; + + pm6125_l23: l23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3400000>; + }; + + pm6125_l24: l24 { + regulator-min-microvolt = <2944000>; + regulator-max-microvolt = <3304000>; + }; + }; +}; + &sdc2_off_state { sd-cd-pins { pins = "gpio98";
Configure PM6125 regulators based on availability and voltages defined downstream, to allow powering up (and/or keeping powered) other hardware blocks going forward. Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> --- .../qcom/sm6125-sony-xperia-seine-pdx201.dts | 139 ++++++++++++++++++ 1 file changed, 139 insertions(+)