| Message ID | 20230111035906.2975494-2-quic_bjorande@quicinc.com (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | 57d6ef683a1554568adafd975b5ea40778b4d672 |
| Headers | show |
| Series | arm64: dts: qcom: sc8280xp: Enable display | expand |
On 11.01.2023 04:59, Bjorn Andersson wrote: > From: Bjorn Andersson <bjorn.andersson@linaro.org> > > Define the display clock controllers, the MDSS instances, the DP phys > and connect these together. > > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> > Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com> > --- Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Konrad > > Changes since v6: > - Dropped assigned-clock-rate on MDP_CLK > - Rearranged the properties in all nodes > > arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 811 +++++++++++++++++++++++++ > 1 file changed, 811 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi > index 0ea2f19d471b..2ed17baf50d3 100644 > --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi > +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi > @@ -4,6 +4,7 @@ > * Copyright (c) 2022, Linaro Limited > */ > > +#include <dt-bindings/clock/qcom,dispcc-sc8280xp.h> > #include <dt-bindings/clock/qcom,gcc-sc8280xp.h> > #include <dt-bindings/clock/qcom,rpmh.h> > #include <dt-bindings/interconnect/qcom,osm-l3.h> > @@ -2097,6 +2098,42 @@ usb_1_qmpphy: phy@8903000 { > status = "disabled"; > }; > > + mdss1_dp0_phy: phy@8909a00 { > + compatible = "qcom,sc8280xp-dp-phy"; > + reg = <0 0x08909a00 0 0x19c>, > + <0 0x08909200 0 0xec>, > + <0 0x08909600 0 0xec>, > + <0 0x08909000 0 0x1c8>; > + > + clocks = <&dispcc1 DISP_CC_MDSS_DPTX0_AUX_CLK>, > + <&dispcc1 DISP_CC_MDSS_AHB_CLK>; > + clock-names = "aux", "cfg_ahb"; > + power-domains = <&rpmhpd SC8280XP_MX>; > + > + #clock-cells = <1>; > + #phy-cells = <0>; > + > + status = "disabled"; > + }; > + > + mdss1_dp1_phy: phy@890ca00 { > + compatible = "qcom,sc8280xp-dp-phy"; > + reg = <0 0x0890ca00 0 0x19c>, > + <0 0x0890c200 0 0xec>, > + <0 0x0890c600 0 0xec>, > + <0 0x0890c000 0 0x1c8>; > + > + clocks = <&dispcc1 DISP_CC_MDSS_DPTX1_AUX_CLK>, > + <&dispcc1 DISP_CC_MDSS_AHB_CLK>; > + clock-names = "aux", "cfg_ahb"; > + power-domains = <&rpmhpd SC8280XP_MX>; > + > + #clock-cells = <1>; > + #phy-cells = <0>; > + > + status = "disabled"; > + }; > + > pmu@9091000 { > compatible = "qcom,sc8280xp-llcc-bwmon", "qcom,sc7280-llcc-bwmon"; > reg = <0 0x9091000 0 0x1000>; > @@ -2303,6 +2340,314 @@ usb_1_dwc3: usb@a800000 { > }; > }; > > + mdss0: display-subsystem@ae00000 { > + compatible = "qcom,sc8280xp-mdss"; > + reg = <0 0x0ae00000 0 0x1000>; > + reg-names = "mdss"; > + > + clocks = <&gcc GCC_DISP_AHB_CLK>, > + <&dispcc0 DISP_CC_MDSS_AHB_CLK>, > + <&dispcc0 DISP_CC_MDSS_MDP_CLK>; > + clock-names = "iface", > + "ahb", > + "core"; > + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; > + interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>, > + <&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>; > + interconnect-names = "mdp0-mem", "mdp1-mem"; > + iommus = <&apps_smmu 0x1000 0x402>; > + power-domains = <&dispcc0 MDSS_GDSC>; > + resets = <&dispcc0 DISP_CC_MDSS_CORE_BCR>; > + > + interrupt-controller; > + #interrupt-cells = <1>; > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + status = "disabled"; > + > + mdss0_mdp: display-controller@ae01000 { > + compatible = "qcom,sc8280xp-dpu"; > + reg = <0 0x0ae01000 0 0x8f000>, > + <0 0x0aeb0000 0 0x2008>; > + reg-names = "mdp", "vbif"; > + > + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, > + <&gcc GCC_DISP_SF_AXI_CLK>, > + <&dispcc0 DISP_CC_MDSS_AHB_CLK>, > + <&dispcc0 DISP_CC_MDSS_MDP_LUT_CLK>, > + <&dispcc0 DISP_CC_MDSS_MDP_CLK>, > + <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>; > + clock-names = "bus", > + "nrt_bus", > + "iface", > + "lut", > + "core", > + "vsync"; > + interrupt-parent = <&mdss0>; > + interrupts = <0>; > + power-domains = <&rpmhpd SC8280XP_MMCX>; > + > + assigned-clocks = <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>; > + assigned-clock-rates = <19200000>; > + operating-points-v2 = <&mdss0_mdp_opp_table>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@5 { > + reg = <5>; > + mdss0_intf5_out: endpoint { > + remote-endpoint = <&mdss0_dp3_in>; > + }; > + }; > + > + port@6 { > + reg = <6>; > + mdss0_intf6_out: endpoint { > + remote-endpoint = <&mdss0_dp2_in>; > + }; > + }; > + }; > + > + mdss0_mdp_opp_table: opp-table { > + compatible = "operating-points-v2"; > + > + opp-200000000 { > + opp-hz = /bits/ 64 <200000000>; > + required-opps = <&rpmhpd_opp_low_svs>; > + }; > + > + opp-300000000 { > + opp-hz = /bits/ 64 <300000000>; > + required-opps = <&rpmhpd_opp_svs>; > + }; > + > + opp-375000000 { > + opp-hz = /bits/ 64 <375000000>; > + required-opps = <&rpmhpd_opp_svs_l1>; > + }; > + > + opp-500000000 { > + opp-hz = /bits/ 64 <500000000>; > + required-opps = <&rpmhpd_opp_nom>; > + }; > + opp-600000000 { > + opp-hz = /bits/ 64 <600000000>; > + required-opps = <&rpmhpd_opp_turbo_l1>; > + }; > + }; > + }; > + > + mdss0_dp2: displayport-controller@ae9a000 { > + compatible = "qcom,sc8280xp-dp"; > + reg = <0 0xae9a000 0 0x200>, > + <0 0xae9a200 0 0x200>, > + <0 0xae9a400 0 0x600>, > + <0 0xae9b000 0 0x400>; > + > + clocks = <&dispcc0 DISP_CC_MDSS_AHB_CLK>, > + <&dispcc0 DISP_CC_MDSS_DPTX2_AUX_CLK>, > + <&dispcc0 DISP_CC_MDSS_DPTX2_LINK_CLK>, > + <&dispcc0 DISP_CC_MDSS_DPTX2_LINK_INTF_CLK>, > + <&dispcc0 DISP_CC_MDSS_DPTX2_PIXEL0_CLK>; > + clock-names = "core_iface", "core_aux", > + "ctrl_link", > + "ctrl_link_iface", "stream_pixel"; > + interrupt-parent = <&mdss0>; > + interrupts = <14>; > + phys = <&mdss0_dp2_phy>; > + phy-names = "dp"; > + power-domains = <&rpmhpd SC8280XP_MMCX>; > + > + assigned-clocks = <&dispcc0 DISP_CC_MDSS_DPTX2_LINK_CLK_SRC>, > + <&dispcc0 DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC>; > + assigned-clock-parents = <&mdss0_dp2_phy 0>, <&mdss0_dp2_phy 1>; > + operating-points-v2 = <&mdss0_dp2_opp_table>; > + > + #sound-dai-cells = <0>; > + > + status = "disabled"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + mdss0_dp2_in: endpoint { > + remote-endpoint = <&mdss0_intf6_out>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + }; > + }; > + > + mdss0_dp2_opp_table: opp-table { > + compatible = "operating-points-v2"; > + > + opp-160000000 { > + opp-hz = /bits/ 64 <160000000>; > + required-opps = <&rpmhpd_opp_low_svs>; > + }; > + > + opp-270000000 { > + opp-hz = /bits/ 64 <270000000>; > + required-opps = <&rpmhpd_opp_svs>; > + }; > + > + opp-540000000 { > + opp-hz = /bits/ 64 <540000000>; > + required-opps = <&rpmhpd_opp_svs_l1>; > + }; > + > + opp-810000000 { > + opp-hz = /bits/ 64 <810000000>; > + required-opps = <&rpmhpd_opp_nom>; > + }; > + }; > + }; > + > + mdss0_dp3: displayport-controller@aea0000 { > + compatible = "qcom,sc8280xp-dp"; > + reg = <0 0xaea0000 0 0x200>, > + <0 0xaea0200 0 0x200>, > + <0 0xaea0400 0 0x600>, > + <0 0xaea1000 0 0x400>; > + > + clocks = <&dispcc0 DISP_CC_MDSS_AHB_CLK>, > + <&dispcc0 DISP_CC_MDSS_DPTX3_AUX_CLK>, > + <&dispcc0 DISP_CC_MDSS_DPTX3_LINK_CLK>, > + <&dispcc0 DISP_CC_MDSS_DPTX3_LINK_INTF_CLK>, > + <&dispcc0 DISP_CC_MDSS_DPTX3_PIXEL0_CLK>; > + clock-names = "core_iface", "core_aux", > + "ctrl_link", > + "ctrl_link_iface", "stream_pixel"; > + interrupt-parent = <&mdss0>; > + interrupts = <15>; > + phys = <&mdss0_dp3_phy>; > + phy-names = "dp"; > + power-domains = <&dispcc0 MDSS_GDSC>; > + > + assigned-clocks = <&dispcc0 DISP_CC_MDSS_DPTX3_LINK_CLK_SRC>, > + <&dispcc0 DISP_CC_MDSS_DPTX3_PIXEL0_CLK_SRC>; > + assigned-clock-parents = <&mdss0_dp3_phy 0>, <&mdss0_dp3_phy 1>; > + operating-points-v2 = <&mdss0_dp3_opp_table>; > + > + #sound-dai-cells = <0>; > + > + status = "disabled"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + mdss0_dp3_in: endpoint { > + remote-endpoint = <&mdss0_intf5_out>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + }; > + }; > + > + mdss0_dp3_opp_table: opp-table { > + compatible = "operating-points-v2"; > + > + opp-160000000 { > + opp-hz = /bits/ 64 <160000000>; > + required-opps = <&rpmhpd_opp_low_svs>; > + }; > + > + opp-270000000 { > + opp-hz = /bits/ 64 <270000000>; > + required-opps = <&rpmhpd_opp_svs>; > + }; > + > + opp-540000000 { > + opp-hz = /bits/ 64 <540000000>; > + required-opps = <&rpmhpd_opp_svs_l1>; > + }; > + > + opp-810000000 { > + opp-hz = /bits/ 64 <810000000>; > + required-opps = <&rpmhpd_opp_nom>; > + }; > + }; > + }; > + }; > + > + mdss0_dp2_phy: phy@aec2a00 { > + compatible = "qcom,sc8280xp-dp-phy"; > + reg = <0 0x0aec2a00 0 0x19c>, > + <0 0x0aec2200 0 0xec>, > + <0 0x0aec2600 0 0xec>, > + <0 0x0aec2000 0 0x1c8>; > + > + clocks = <&dispcc0 DISP_CC_MDSS_DPTX2_AUX_CLK>, > + <&dispcc0 DISP_CC_MDSS_AHB_CLK>; > + clock-names = "aux", "cfg_ahb"; > + power-domains = <&rpmhpd SC8280XP_MX>; > + > + #clock-cells = <1>; > + #phy-cells = <0>; > + > + status = "disabled"; > + }; > + > + mdss0_dp3_phy: phy@aec5a00 { > + compatible = "qcom,sc8280xp-dp-phy"; > + reg = <0 0x0aec5a00 0 0x19c>, > + <0 0x0aec5200 0 0xec>, > + <0 0x0aec5600 0 0xec>, > + <0 0x0aec5000 0 0x1c8>; > + > + clocks = <&dispcc0 DISP_CC_MDSS_DPTX3_AUX_CLK>, > + <&dispcc0 DISP_CC_MDSS_AHB_CLK>; > + clock-names = "aux", "cfg_ahb"; > + power-domains = <&rpmhpd SC8280XP_MX>; > + > + #clock-cells = <1>; > + #phy-cells = <0>; > + > + status = "disabled"; > + }; > + > + dispcc0: clock-controller@af00000 { > + compatible = "qcom,sc8280xp-dispcc0"; > + reg = <0 0x0af00000 0 0x20000>; > + > + clocks = <&gcc GCC_DISP_AHB_CLK>, > + <&rpmhcc RPMH_CXO_CLK>, > + <&sleep_clk>, > + <0>, > + <0>, > + <0>, > + <0>, > + <&mdss0_dp2_phy 0>, > + <&mdss0_dp2_phy 1>, > + <&mdss0_dp3_phy 0>, > + <&mdss0_dp3_phy 1>, > + <0>, > + <0>, > + <0>, > + <0>; > + power-domains = <&rpmhpd SC8280XP_MMCX>; > + > + #clock-cells = <1>; > + #power-domain-cells = <1>; > + #reset-cells = <1>; > + > + status = "disabled"; > + }; > + > pdc: interrupt-controller@b220000 { > compatible = "qcom,sc8280xp-pdc", "qcom,pdc"; > reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>; > @@ -2925,6 +3270,472 @@ IPCC_MPROC_SIGNAL_GLINK_QMP > qcom,remote-pid = <12>; > }; > }; > + > + mdss1: display-subsystem@22000000 { > + compatible = "qcom,sc8280xp-mdss"; > + reg = <0 0x22000000 0 0x1000>; > + reg-names = "mdss"; > + > + clocks = <&gcc GCC_DISP_AHB_CLK>, > + <&dispcc1 DISP_CC_MDSS_AHB_CLK>, > + <&dispcc1 DISP_CC_MDSS_MDP_CLK>; > + clock-names = "iface", > + "ahb", > + "core"; > + interconnects = <&mmss_noc MASTER_MDP_CORE1_0 0 &mc_virt SLAVE_EBI1 0>, > + <&mmss_noc MASTER_MDP_CORE1_1 0 &mc_virt SLAVE_EBI1 0>; > + interconnect-names = "mdp0-mem", "mdp1-mem"; > + interrupts = <GIC_SPI 865 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-controller; > + > + iommus = <&apps_smmu 0x1800 0x402>; > + power-domains = <&dispcc1 MDSS_GDSC>; > + resets = <&dispcc1 DISP_CC_MDSS_CORE_BCR>; > + > + #interrupt-cells = <1>; > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + status = "disabled"; > + > + mdss1_mdp: display-controller@22001000 { > + compatible = "qcom,sc8280xp-dpu"; > + reg = <0 0x22001000 0 0x8f000>, > + <0 0x220b0000 0 0x2008>; > + reg-names = "mdp", "vbif"; > + > + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, > + <&gcc GCC_DISP_SF_AXI_CLK>, > + <&dispcc1 DISP_CC_MDSS_AHB_CLK>, > + <&dispcc1 DISP_CC_MDSS_MDP_LUT_CLK>, > + <&dispcc1 DISP_CC_MDSS_MDP_CLK>, > + <&dispcc1 DISP_CC_MDSS_VSYNC_CLK>; > + clock-names = "bus", > + "nrt_bus", > + "iface", > + "lut", > + "core", > + "vsync"; > + interrupt-parent = <&mdss1>; > + interrupts = <0>; > + power-domains = <&rpmhpd SC8280XP_MMCX>; > + > + assigned-clocks = <&dispcc1 DISP_CC_MDSS_VSYNC_CLK>; > + assigned-clock-rates = <19200000>; > + operating-points-v2 = <&mdss1_mdp_opp_table>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + mdss1_intf0_out: endpoint { > + remote-endpoint = <&mdss1_dp0_in>; > + }; > + }; > + > + port@4 { > + reg = <4>; > + mdss1_intf4_out: endpoint { > + remote-endpoint = <&mdss1_dp1_in>; > + }; > + }; > + > + port@5 { > + reg = <5>; > + mdss1_intf5_out: endpoint { > + remote-endpoint = <&mdss1_dp3_in>; > + }; > + }; > + > + port@6 { > + reg = <6>; > + mdss1_intf6_out: endpoint { > + remote-endpoint = <&mdss1_dp2_in>; > + }; > + }; > + }; > + > + mdss1_mdp_opp_table: opp-table { > + compatible = "operating-points-v2"; > + > + opp-200000000 { > + opp-hz = /bits/ 64 <200000000>; > + required-opps = <&rpmhpd_opp_low_svs>; > + }; > + > + opp-300000000 { > + opp-hz = /bits/ 64 <300000000>; > + required-opps = <&rpmhpd_opp_svs>; > + }; > + > + opp-375000000 { > + opp-hz = /bits/ 64 <375000000>; > + required-opps = <&rpmhpd_opp_svs_l1>; > + }; > + > + opp-500000000 { > + opp-hz = /bits/ 64 <500000000>; > + required-opps = <&rpmhpd_opp_nom>; > + }; > + opp-600000000 { > + opp-hz = /bits/ 64 <600000000>; > + required-opps = <&rpmhpd_opp_turbo_l1>; > + }; > + }; > + }; > + > + mdss1_dp0: displayport-controller@22090000 { > + compatible = "qcom,sc8280xp-dp"; > + reg = <0 0x22090000 0 0x200>, > + <0 0x22090200 0 0x200>, > + <0 0x22090400 0 0x600>, > + <0 0x22091000 0 0x400>; > + > + clocks = <&dispcc1 DISP_CC_MDSS_AHB_CLK>, > + <&dispcc1 DISP_CC_MDSS_DPTX0_AUX_CLK>, > + <&dispcc1 DISP_CC_MDSS_DPTX0_LINK_CLK>, > + <&dispcc1 DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>, > + <&dispcc1 DISP_CC_MDSS_DPTX0_PIXEL0_CLK>; > + clock-names = "core_iface", "core_aux", > + "ctrl_link", > + "ctrl_link_iface", "stream_pixel"; > + interrupt-parent = <&mdss1>; > + interrupts = <12>; > + phys = <&mdss1_dp0_phy>; > + phy-names = "dp"; > + power-domains = <&rpmhpd SC8280XP_MMCX>; > + > + assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>, > + <&dispcc1 DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>; > + assigned-clock-parents = <&mdss1_dp0_phy 0>, <&mdss1_dp0_phy 1>; > + operating-points-v2 = <&mdss1_dp0_opp_table>; > + > + #sound-dai-cells = <0>; > + > + status = "disabled"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + mdss1_dp0_in: endpoint { > + remote-endpoint = <&mdss1_intf0_out>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + }; > + }; > + > + mdss1_dp0_opp_table: opp-table { > + compatible = "operating-points-v2"; > + > + opp-160000000 { > + opp-hz = /bits/ 64 <160000000>; > + required-opps = <&rpmhpd_opp_low_svs>; > + }; > + > + opp-270000000 { > + opp-hz = /bits/ 64 <270000000>; > + required-opps = <&rpmhpd_opp_svs>; > + }; > + > + opp-540000000 { > + opp-hz = /bits/ 64 <540000000>; > + required-opps = <&rpmhpd_opp_svs_l1>; > + }; > + > + opp-810000000 { > + opp-hz = /bits/ 64 <810000000>; > + required-opps = <&rpmhpd_opp_nom>; > + }; > + }; > + > + }; > + > + mdss1_dp1: displayport-controller@22098000 { > + compatible = "qcom,sc8280xp-dp"; > + reg = <0 0x22098000 0 0x200>, > + <0 0x22098200 0 0x200>, > + <0 0x22098400 0 0x600>, > + <0 0x22099000 0 0x400>; > + > + clocks = <&dispcc1 DISP_CC_MDSS_AHB_CLK>, > + <&dispcc1 DISP_CC_MDSS_DPTX1_AUX_CLK>, > + <&dispcc1 DISP_CC_MDSS_DPTX1_LINK_CLK>, > + <&dispcc1 DISP_CC_MDSS_DPTX1_LINK_INTF_CLK>, > + <&dispcc1 DISP_CC_MDSS_DPTX1_PIXEL0_CLK>; > + clock-names = "core_iface", "core_aux", > + "ctrl_link", > + "ctrl_link_iface", "stream_pixel"; > + interrupt-parent = <&mdss1>; > + interrupts = <13>; > + phys = <&mdss1_dp1_phy>; > + phy-names = "dp"; > + power-domains = <&rpmhpd SC8280XP_MMCX>; > + > + assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX1_LINK_CLK_SRC>, > + <&dispcc1 DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>; > + assigned-clock-parents = <&mdss1_dp1_phy 0>, <&mdss1_dp1_phy 1>; > + operating-points-v2 = <&mdss1_dp1_opp_table>; > + > + #sound-dai-cells = <0>; > + > + status = "disabled"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + mdss1_dp1_in: endpoint { > + remote-endpoint = <&mdss1_intf4_out>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + }; > + }; > + > + mdss1_dp1_opp_table: opp-table { > + compatible = "operating-points-v2"; > + > + opp-160000000 { > + opp-hz = /bits/ 64 <160000000>; > + required-opps = <&rpmhpd_opp_low_svs>; > + }; > + > + opp-270000000 { > + opp-hz = /bits/ 64 <270000000>; > + required-opps = <&rpmhpd_opp_svs>; > + }; > + > + opp-540000000 { > + opp-hz = /bits/ 64 <540000000>; > + required-opps = <&rpmhpd_opp_svs_l1>; > + }; > + > + opp-810000000 { > + opp-hz = /bits/ 64 <810000000>; > + required-opps = <&rpmhpd_opp_nom>; > + }; > + }; > + }; > + > + mdss1_dp2: displayport-controller@2209a000 { > + compatible = "qcom,sc8280xp-dp"; > + reg = <0 0x2209a000 0 0x200>, > + <0 0x2209a200 0 0x200>, > + <0 0x2209a400 0 0x600>, > + <0 0x2209b000 0 0x400>; > + > + clocks = <&dispcc1 DISP_CC_MDSS_AHB_CLK>, > + <&dispcc1 DISP_CC_MDSS_DPTX2_AUX_CLK>, > + <&dispcc1 DISP_CC_MDSS_DPTX2_LINK_CLK>, > + <&dispcc1 DISP_CC_MDSS_DPTX2_LINK_INTF_CLK>, > + <&dispcc1 DISP_CC_MDSS_DPTX2_PIXEL0_CLK>; > + clock-names = "core_iface", "core_aux", > + "ctrl_link", > + "ctrl_link_iface", "stream_pixel"; > + interrupt-parent = <&mdss1>; > + interrupts = <14>; > + phys = <&mdss1_dp2_phy>; > + phy-names = "dp"; > + power-domains = <&rpmhpd SC8280XP_MMCX>; > + > + assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX2_LINK_CLK_SRC>, > + <&dispcc1 DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC>; > + assigned-clock-parents = <&mdss1_dp2_phy 0>, <&mdss1_dp2_phy 1>; > + operating-points-v2 = <&mdss1_dp2_opp_table>; > + > + #sound-dai-cells = <0>; > + > + status = "disabled"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + mdss1_dp2_in: endpoint { > + remote-endpoint = <&mdss1_intf6_out>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + }; > + }; > + > + mdss1_dp2_opp_table: opp-table { > + compatible = "operating-points-v2"; > + > + opp-160000000 { > + opp-hz = /bits/ 64 <160000000>; > + required-opps = <&rpmhpd_opp_low_svs>; > + }; > + > + opp-270000000 { > + opp-hz = /bits/ 64 <270000000>; > + required-opps = <&rpmhpd_opp_svs>; > + }; > + > + opp-540000000 { > + opp-hz = /bits/ 64 <540000000>; > + required-opps = <&rpmhpd_opp_svs_l1>; > + }; > + > + opp-810000000 { > + opp-hz = /bits/ 64 <810000000>; > + required-opps = <&rpmhpd_opp_nom>; > + }; > + }; > + }; > + > + mdss1_dp3: displayport-controller@220a0000 { > + compatible = "qcom,sc8280xp-dp"; > + reg = <0 0x220a0000 0 0x200>, > + <0 0x220a0200 0 0x200>, > + <0 0x220a0400 0 0x600>, > + <0 0x220a1000 0 0x400>; > + > + clocks = <&dispcc1 DISP_CC_MDSS_AHB_CLK>, > + <&dispcc1 DISP_CC_MDSS_DPTX3_AUX_CLK>, > + <&dispcc1 DISP_CC_MDSS_DPTX3_LINK_CLK>, > + <&dispcc1 DISP_CC_MDSS_DPTX3_LINK_INTF_CLK>, > + <&dispcc1 DISP_CC_MDSS_DPTX3_PIXEL0_CLK>; > + clock-names = "core_iface", "core_aux", > + "ctrl_link", > + "ctrl_link_iface", "stream_pixel"; > + interrupt-parent = <&mdss1>; > + interrupts = <15>; > + phys = <&mdss1_dp3_phy>; > + phy-names = "dp"; > + power-domains = <&rpmhpd SC8280XP_MMCX>; > + > + assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX3_LINK_CLK_SRC>, > + <&dispcc1 DISP_CC_MDSS_DPTX3_PIXEL0_CLK_SRC>; > + assigned-clock-parents = <&mdss1_dp3_phy 0>, <&mdss1_dp3_phy 1>; > + operating-points-v2 = <&mdss1_dp3_opp_table>; > + > + #sound-dai-cells = <0>; > + > + status = "disabled"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + mdss1_dp3_in: endpoint { > + remote-endpoint = <&mdss1_intf5_out>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + }; > + }; > + > + mdss1_dp3_opp_table: opp-table { > + compatible = "operating-points-v2"; > + > + opp-160000000 { > + opp-hz = /bits/ 64 <160000000>; > + required-opps = <&rpmhpd_opp_low_svs>; > + }; > + > + opp-270000000 { > + opp-hz = /bits/ 64 <270000000>; > + required-opps = <&rpmhpd_opp_svs>; > + }; > + > + opp-540000000 { > + opp-hz = /bits/ 64 <540000000>; > + required-opps = <&rpmhpd_opp_svs_l1>; > + }; > + > + opp-810000000 { > + opp-hz = /bits/ 64 <810000000>; > + required-opps = <&rpmhpd_opp_nom>; > + }; > + }; > + }; > + }; > + > + mdss1_dp2_phy: phy@220c2a00 { > + compatible = "qcom,sc8280xp-dp-phy"; > + reg = <0 0x220c2a00 0 0x19c>, > + <0 0x220c2200 0 0xec>, > + <0 0x220c2600 0 0xec>, > + <0 0x220c2000 0 0x1c8>; > + > + clocks = <&dispcc1 DISP_CC_MDSS_DPTX2_AUX_CLK>, > + <&dispcc1 DISP_CC_MDSS_AHB_CLK>; > + clock-names = "aux", "cfg_ahb"; > + power-domains = <&rpmhpd SC8280XP_MX>; > + > + #clock-cells = <1>; > + #phy-cells = <0>; > + > + status = "disabled"; > + }; > + > + mdss1_dp3_phy: phy@220c5a00 { > + compatible = "qcom,sc8280xp-dp-phy"; > + reg = <0 0x220c5a00 0 0x19c>, > + <0 0x220c5200 0 0xec>, > + <0 0x220c5600 0 0xec>, > + <0 0x220c5000 0 0x1c8>; > + > + clocks = <&dispcc1 DISP_CC_MDSS_DPTX3_AUX_CLK>, > + <&dispcc1 DISP_CC_MDSS_AHB_CLK>; > + clock-names = "aux", "cfg_ahb"; > + power-domains = <&rpmhpd SC8280XP_MX>; > + > + #clock-cells = <1>; > + #phy-cells = <0>; > + > + status = "disabled"; > + }; > + > + dispcc1: clock-controller@22100000 { > + compatible = "qcom,sc8280xp-dispcc1"; > + reg = <0 0x22100000 0 0x20000>; > + > + clocks = <&gcc GCC_DISP_AHB_CLK>, > + <&rpmhcc RPMH_CXO_CLK>, > + <0>, > + <&mdss1_dp0_phy 0>, > + <&mdss1_dp0_phy 1>, > + <&mdss1_dp1_phy 0>, > + <&mdss1_dp1_phy 1>, > + <&mdss1_dp2_phy 0>, > + <&mdss1_dp2_phy 1>, > + <&mdss1_dp3_phy 0>, > + <&mdss1_dp3_phy 1>, > + <0>, > + <0>, > + <0>, > + <0>; > + power-domains = <&rpmhpd SC8280XP_MMCX>; > + > + #clock-cells = <1>; > + #power-domain-cells = <1>; > + #reset-cells = <1>; > + > + status = "disabled"; > + }; > }; > > sound: sound {
On Tue, Jan 10, 2023 at 07:59:03PM -0800, Bjorn Andersson wrote: > From: Bjorn Andersson <bjorn.andersson@linaro.org> > > Define the display clock controllers, the MDSS instances, the DP phys > and connect these together. > > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> > Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com> > --- > > Changes since v6: > - Dropped assigned-clock-rate on MDP_CLK > - Rearranged the properties in all nodes > > arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 811 +++++++++++++++++++++++++ > 1 file changed, 811 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi > index 0ea2f19d471b..2ed17baf50d3 100644 > --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi > +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi > + mdss0_mdp: display-controller@ae01000 { > + compatible = "qcom,sc8280xp-dpu"; > + reg = <0 0x0ae01000 0 0x8f000>, > + <0 0x0aeb0000 0 0x2008>; > + reg-names = "mdp", "vbif"; > + > + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, > + <&gcc GCC_DISP_SF_AXI_CLK>, > + <&dispcc0 DISP_CC_MDSS_AHB_CLK>, > + <&dispcc0 DISP_CC_MDSS_MDP_LUT_CLK>, > + <&dispcc0 DISP_CC_MDSS_MDP_CLK>, > + <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>; > + clock-names = "bus", > + "nrt_bus", > + "iface", > + "lut", > + "core", > + "vsync"; > + interrupt-parent = <&mdss0>; > + interrupts = <0>; > + power-domains = <&rpmhpd SC8280XP_MMCX>; > + > + assigned-clocks = <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>; > + assigned-clock-rates = <19200000>; Nit: Shouldn't these come after the clock-names property as they did in v5 so that the clock properties are grouped? > + operating-points-v2 = <&mdss0_mdp_opp_table>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@5 { > + reg = <5>; > + mdss0_intf5_out: endpoint { > + remote-endpoint = <&mdss0_dp3_in>; > + }; > + }; > + > + port@6 { > + reg = <6>; > + mdss0_intf6_out: endpoint { > + remote-endpoint = <&mdss0_dp2_in>; > + }; > + }; > + }; > + mdss0_dp2: displayport-controller@ae9a000 { > + compatible = "qcom,sc8280xp-dp"; > + reg = <0 0xae9a000 0 0x200>, > + <0 0xae9a200 0 0x200>, > + <0 0xae9a400 0 0x600>, > + <0 0xae9b000 0 0x400>; > + > + clocks = <&dispcc0 DISP_CC_MDSS_AHB_CLK>, > + <&dispcc0 DISP_CC_MDSS_DPTX2_AUX_CLK>, > + <&dispcc0 DISP_CC_MDSS_DPTX2_LINK_CLK>, > + <&dispcc0 DISP_CC_MDSS_DPTX2_LINK_INTF_CLK>, > + <&dispcc0 DISP_CC_MDSS_DPTX2_PIXEL0_CLK>; > + clock-names = "core_iface", "core_aux", > + "ctrl_link", > + "ctrl_link_iface", "stream_pixel"; > + interrupt-parent = <&mdss0>; > + interrupts = <14>; > + phys = <&mdss0_dp2_phy>; > + phy-names = "dp"; > + power-domains = <&rpmhpd SC8280XP_MMCX>; > + > + assigned-clocks = <&dispcc0 DISP_CC_MDSS_DPTX2_LINK_CLK_SRC>, > + <&dispcc0 DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC>; > + assigned-clock-parents = <&mdss0_dp2_phy 0>, <&mdss0_dp2_phy 1>; Same here. > + operating-points-v2 = <&mdss0_dp2_opp_table>; > + > + #sound-dai-cells = <0>; > + > + status = "disabled"; > + mdss0_dp3: displayport-controller@aea0000 { > + compatible = "qcom,sc8280xp-dp"; > + reg = <0 0xaea0000 0 0x200>, > + <0 0xaea0200 0 0x200>, > + <0 0xaea0400 0 0x600>, > + <0 0xaea1000 0 0x400>; > + > + clocks = <&dispcc0 DISP_CC_MDSS_AHB_CLK>, > + <&dispcc0 DISP_CC_MDSS_DPTX3_AUX_CLK>, > + <&dispcc0 DISP_CC_MDSS_DPTX3_LINK_CLK>, > + <&dispcc0 DISP_CC_MDSS_DPTX3_LINK_INTF_CLK>, > + <&dispcc0 DISP_CC_MDSS_DPTX3_PIXEL0_CLK>; > + clock-names = "core_iface", "core_aux", > + "ctrl_link", > + "ctrl_link_iface", "stream_pixel"; > + interrupt-parent = <&mdss0>; > + interrupts = <15>; > + phys = <&mdss0_dp3_phy>; > + phy-names = "dp"; > + power-domains = <&dispcc0 MDSS_GDSC>; > + > + assigned-clocks = <&dispcc0 DISP_CC_MDSS_DPTX3_LINK_CLK_SRC>, > + <&dispcc0 DISP_CC_MDSS_DPTX3_PIXEL0_CLK_SRC>; > + assigned-clock-parents = <&mdss0_dp3_phy 0>, <&mdss0_dp3_phy 1>; And here. > + operating-points-v2 = <&mdss0_dp3_opp_table>; > + > + #sound-dai-cells = <0>; > + > + status = "disabled"; > + mdss1: display-subsystem@22000000 { > + compatible = "qcom,sc8280xp-mdss"; > + reg = <0 0x22000000 0 0x1000>; > + reg-names = "mdss"; > + > + clocks = <&gcc GCC_DISP_AHB_CLK>, > + <&dispcc1 DISP_CC_MDSS_AHB_CLK>, > + <&dispcc1 DISP_CC_MDSS_MDP_CLK>; > + clock-names = "iface", > + "ahb", > + "core"; > + interconnects = <&mmss_noc MASTER_MDP_CORE1_0 0 &mc_virt SLAVE_EBI1 0>, > + <&mmss_noc MASTER_MDP_CORE1_1 0 &mc_virt SLAVE_EBI1 0>; > + interconnect-names = "mdp0-mem", "mdp1-mem"; > + interrupts = <GIC_SPI 865 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-controller; This is a provider property so perhaps it should go before '#interrupt-cells' as it did above? > + > + iommus = <&apps_smmu 0x1800 0x402>; > + power-domains = <&dispcc1 MDSS_GDSC>; > + resets = <&dispcc1 DISP_CC_MDSS_CORE_BCR>; > + > + #interrupt-cells = <1>; > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + status = "disabled"; > + > + mdss1_mdp: display-controller@22001000 { > + compatible = "qcom,sc8280xp-dpu"; > + reg = <0 0x22001000 0 0x8f000>, > + <0 0x220b0000 0 0x2008>; > + reg-names = "mdp", "vbif"; > + > + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, > + <&gcc GCC_DISP_SF_AXI_CLK>, > + <&dispcc1 DISP_CC_MDSS_AHB_CLK>, > + <&dispcc1 DISP_CC_MDSS_MDP_LUT_CLK>, > + <&dispcc1 DISP_CC_MDSS_MDP_CLK>, > + <&dispcc1 DISP_CC_MDSS_VSYNC_CLK>; > + clock-names = "bus", > + "nrt_bus", > + "iface", > + "lut", > + "core", > + "vsync"; > + interrupt-parent = <&mdss1>; > + interrupts = <0>; > + power-domains = <&rpmhpd SC8280XP_MMCX>; > + > + assigned-clocks = <&dispcc1 DISP_CC_MDSS_VSYNC_CLK>; > + assigned-clock-rates = <19200000>; Move after 'clock-names'? There are a few more instances like this below. Johan
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi index 0ea2f19d471b..2ed17baf50d3 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi @@ -4,6 +4,7 @@ * Copyright (c) 2022, Linaro Limited */ +#include <dt-bindings/clock/qcom,dispcc-sc8280xp.h> #include <dt-bindings/clock/qcom,gcc-sc8280xp.h> #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/interconnect/qcom,osm-l3.h> @@ -2097,6 +2098,42 @@ usb_1_qmpphy: phy@8903000 { status = "disabled"; }; + mdss1_dp0_phy: phy@8909a00 { + compatible = "qcom,sc8280xp-dp-phy"; + reg = <0 0x08909a00 0 0x19c>, + <0 0x08909200 0 0xec>, + <0 0x08909600 0 0xec>, + <0 0x08909000 0 0x1c8>; + + clocks = <&dispcc1 DISP_CC_MDSS_DPTX0_AUX_CLK>, + <&dispcc1 DISP_CC_MDSS_AHB_CLK>; + clock-names = "aux", "cfg_ahb"; + power-domains = <&rpmhpd SC8280XP_MX>; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + + mdss1_dp1_phy: phy@890ca00 { + compatible = "qcom,sc8280xp-dp-phy"; + reg = <0 0x0890ca00 0 0x19c>, + <0 0x0890c200 0 0xec>, + <0 0x0890c600 0 0xec>, + <0 0x0890c000 0 0x1c8>; + + clocks = <&dispcc1 DISP_CC_MDSS_DPTX1_AUX_CLK>, + <&dispcc1 DISP_CC_MDSS_AHB_CLK>; + clock-names = "aux", "cfg_ahb"; + power-domains = <&rpmhpd SC8280XP_MX>; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + pmu@9091000 { compatible = "qcom,sc8280xp-llcc-bwmon", "qcom,sc7280-llcc-bwmon"; reg = <0 0x9091000 0 0x1000>; @@ -2303,6 +2340,314 @@ usb_1_dwc3: usb@a800000 { }; }; + mdss0: display-subsystem@ae00000 { + compatible = "qcom,sc8280xp-mdss"; + reg = <0 0x0ae00000 0 0x1000>; + reg-names = "mdss"; + + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&dispcc0 DISP_CC_MDSS_AHB_CLK>, + <&dispcc0 DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", + "ahb", + "core"; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>, + <&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "mdp0-mem", "mdp1-mem"; + iommus = <&apps_smmu 0x1000 0x402>; + power-domains = <&dispcc0 MDSS_GDSC>; + resets = <&dispcc0 DISP_CC_MDSS_CORE_BCR>; + + interrupt-controller; + #interrupt-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + mdss0_mdp: display-controller@ae01000 { + compatible = "qcom,sc8280xp-dpu"; + reg = <0 0x0ae01000 0 0x8f000>, + <0 0x0aeb0000 0 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc0 DISP_CC_MDSS_AHB_CLK>, + <&dispcc0 DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc0 DISP_CC_MDSS_MDP_CLK>, + <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", + "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + interrupt-parent = <&mdss0>; + interrupts = <0>; + power-domains = <&rpmhpd SC8280XP_MMCX>; + + assigned-clocks = <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + operating-points-v2 = <&mdss0_mdp_opp_table>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@5 { + reg = <5>; + mdss0_intf5_out: endpoint { + remote-endpoint = <&mdss0_dp3_in>; + }; + }; + + port@6 { + reg = <6>; + mdss0_intf6_out: endpoint { + remote-endpoint = <&mdss0_dp2_in>; + }; + }; + }; + + mdss0_mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-375000000 { + opp-hz = /bits/ 64 <375000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + required-opps = <&rpmhpd_opp_turbo_l1>; + }; + }; + }; + + mdss0_dp2: displayport-controller@ae9a000 { + compatible = "qcom,sc8280xp-dp"; + reg = <0 0xae9a000 0 0x200>, + <0 0xae9a200 0 0x200>, + <0 0xae9a400 0 0x600>, + <0 0xae9b000 0 0x400>; + + clocks = <&dispcc0 DISP_CC_MDSS_AHB_CLK>, + <&dispcc0 DISP_CC_MDSS_DPTX2_AUX_CLK>, + <&dispcc0 DISP_CC_MDSS_DPTX2_LINK_CLK>, + <&dispcc0 DISP_CC_MDSS_DPTX2_LINK_INTF_CLK>, + <&dispcc0 DISP_CC_MDSS_DPTX2_PIXEL0_CLK>; + clock-names = "core_iface", "core_aux", + "ctrl_link", + "ctrl_link_iface", "stream_pixel"; + interrupt-parent = <&mdss0>; + interrupts = <14>; + phys = <&mdss0_dp2_phy>; + phy-names = "dp"; + power-domains = <&rpmhpd SC8280XP_MMCX>; + + assigned-clocks = <&dispcc0 DISP_CC_MDSS_DPTX2_LINK_CLK_SRC>, + <&dispcc0 DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC>; + assigned-clock-parents = <&mdss0_dp2_phy 0>, <&mdss0_dp2_phy 1>; + operating-points-v2 = <&mdss0_dp2_opp_table>; + + #sound-dai-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss0_dp2_in: endpoint { + remote-endpoint = <&mdss0_intf6_out>; + }; + }; + + port@1 { + reg = <1>; + }; + }; + + mdss0_dp2_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss0_dp3: displayport-controller@aea0000 { + compatible = "qcom,sc8280xp-dp"; + reg = <0 0xaea0000 0 0x200>, + <0 0xaea0200 0 0x200>, + <0 0xaea0400 0 0x600>, + <0 0xaea1000 0 0x400>; + + clocks = <&dispcc0 DISP_CC_MDSS_AHB_CLK>, + <&dispcc0 DISP_CC_MDSS_DPTX3_AUX_CLK>, + <&dispcc0 DISP_CC_MDSS_DPTX3_LINK_CLK>, + <&dispcc0 DISP_CC_MDSS_DPTX3_LINK_INTF_CLK>, + <&dispcc0 DISP_CC_MDSS_DPTX3_PIXEL0_CLK>; + clock-names = "core_iface", "core_aux", + "ctrl_link", + "ctrl_link_iface", "stream_pixel"; + interrupt-parent = <&mdss0>; + interrupts = <15>; + phys = <&mdss0_dp3_phy>; + phy-names = "dp"; + power-domains = <&dispcc0 MDSS_GDSC>; + + assigned-clocks = <&dispcc0 DISP_CC_MDSS_DPTX3_LINK_CLK_SRC>, + <&dispcc0 DISP_CC_MDSS_DPTX3_PIXEL0_CLK_SRC>; + assigned-clock-parents = <&mdss0_dp3_phy 0>, <&mdss0_dp3_phy 1>; + operating-points-v2 = <&mdss0_dp3_opp_table>; + + #sound-dai-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss0_dp3_in: endpoint { + remote-endpoint = <&mdss0_intf5_out>; + }; + }; + + port@1 { + reg = <1>; + }; + }; + + mdss0_dp3_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + }; + + mdss0_dp2_phy: phy@aec2a00 { + compatible = "qcom,sc8280xp-dp-phy"; + reg = <0 0x0aec2a00 0 0x19c>, + <0 0x0aec2200 0 0xec>, + <0 0x0aec2600 0 0xec>, + <0 0x0aec2000 0 0x1c8>; + + clocks = <&dispcc0 DISP_CC_MDSS_DPTX2_AUX_CLK>, + <&dispcc0 DISP_CC_MDSS_AHB_CLK>; + clock-names = "aux", "cfg_ahb"; + power-domains = <&rpmhpd SC8280XP_MX>; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + + mdss0_dp3_phy: phy@aec5a00 { + compatible = "qcom,sc8280xp-dp-phy"; + reg = <0 0x0aec5a00 0 0x19c>, + <0 0x0aec5200 0 0xec>, + <0 0x0aec5600 0 0xec>, + <0 0x0aec5000 0 0x1c8>; + + clocks = <&dispcc0 DISP_CC_MDSS_DPTX3_AUX_CLK>, + <&dispcc0 DISP_CC_MDSS_AHB_CLK>; + clock-names = "aux", "cfg_ahb"; + power-domains = <&rpmhpd SC8280XP_MX>; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + + dispcc0: clock-controller@af00000 { + compatible = "qcom,sc8280xp-dispcc0"; + reg = <0 0x0af00000 0 0x20000>; + + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&sleep_clk>, + <0>, + <0>, + <0>, + <0>, + <&mdss0_dp2_phy 0>, + <&mdss0_dp2_phy 1>, + <&mdss0_dp3_phy 0>, + <&mdss0_dp3_phy 1>, + <0>, + <0>, + <0>, + <0>; + power-domains = <&rpmhpd SC8280XP_MMCX>; + + #clock-cells = <1>; + #power-domain-cells = <1>; + #reset-cells = <1>; + + status = "disabled"; + }; + pdc: interrupt-controller@b220000 { compatible = "qcom,sc8280xp-pdc", "qcom,pdc"; reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>; @@ -2925,6 +3270,472 @@ IPCC_MPROC_SIGNAL_GLINK_QMP qcom,remote-pid = <12>; }; }; + + mdss1: display-subsystem@22000000 { + compatible = "qcom,sc8280xp-mdss"; + reg = <0 0x22000000 0 0x1000>; + reg-names = "mdss"; + + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&dispcc1 DISP_CC_MDSS_AHB_CLK>, + <&dispcc1 DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", + "ahb", + "core"; + interconnects = <&mmss_noc MASTER_MDP_CORE1_0 0 &mc_virt SLAVE_EBI1 0>, + <&mmss_noc MASTER_MDP_CORE1_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "mdp0-mem", "mdp1-mem"; + interrupts = <GIC_SPI 865 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + + iommus = <&apps_smmu 0x1800 0x402>; + power-domains = <&dispcc1 MDSS_GDSC>; + resets = <&dispcc1 DISP_CC_MDSS_CORE_BCR>; + + #interrupt-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + mdss1_mdp: display-controller@22001000 { + compatible = "qcom,sc8280xp-dpu"; + reg = <0 0x22001000 0 0x8f000>, + <0 0x220b0000 0 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc1 DISP_CC_MDSS_AHB_CLK>, + <&dispcc1 DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc1 DISP_CC_MDSS_MDP_CLK>, + <&dispcc1 DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", + "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + interrupt-parent = <&mdss1>; + interrupts = <0>; + power-domains = <&rpmhpd SC8280XP_MMCX>; + + assigned-clocks = <&dispcc1 DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + operating-points-v2 = <&mdss1_mdp_opp_table>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss1_intf0_out: endpoint { + remote-endpoint = <&mdss1_dp0_in>; + }; + }; + + port@4 { + reg = <4>; + mdss1_intf4_out: endpoint { + remote-endpoint = <&mdss1_dp1_in>; + }; + }; + + port@5 { + reg = <5>; + mdss1_intf5_out: endpoint { + remote-endpoint = <&mdss1_dp3_in>; + }; + }; + + port@6 { + reg = <6>; + mdss1_intf6_out: endpoint { + remote-endpoint = <&mdss1_dp2_in>; + }; + }; + }; + + mdss1_mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-375000000 { + opp-hz = /bits/ 64 <375000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + required-opps = <&rpmhpd_opp_turbo_l1>; + }; + }; + }; + + mdss1_dp0: displayport-controller@22090000 { + compatible = "qcom,sc8280xp-dp"; + reg = <0 0x22090000 0 0x200>, + <0 0x22090200 0 0x200>, + <0 0x22090400 0 0x600>, + <0 0x22091000 0 0x400>; + + clocks = <&dispcc1 DISP_CC_MDSS_AHB_CLK>, + <&dispcc1 DISP_CC_MDSS_DPTX0_AUX_CLK>, + <&dispcc1 DISP_CC_MDSS_DPTX0_LINK_CLK>, + <&dispcc1 DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>, + <&dispcc1 DISP_CC_MDSS_DPTX0_PIXEL0_CLK>; + clock-names = "core_iface", "core_aux", + "ctrl_link", + "ctrl_link_iface", "stream_pixel"; + interrupt-parent = <&mdss1>; + interrupts = <12>; + phys = <&mdss1_dp0_phy>; + phy-names = "dp"; + power-domains = <&rpmhpd SC8280XP_MMCX>; + + assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>, + <&dispcc1 DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>; + assigned-clock-parents = <&mdss1_dp0_phy 0>, <&mdss1_dp0_phy 1>; + operating-points-v2 = <&mdss1_dp0_opp_table>; + + #sound-dai-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss1_dp0_in: endpoint { + remote-endpoint = <&mdss1_intf0_out>; + }; + }; + + port@1 { + reg = <1>; + }; + }; + + mdss1_dp0_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + + }; + + mdss1_dp1: displayport-controller@22098000 { + compatible = "qcom,sc8280xp-dp"; + reg = <0 0x22098000 0 0x200>, + <0 0x22098200 0 0x200>, + <0 0x22098400 0 0x600>, + <0 0x22099000 0 0x400>; + + clocks = <&dispcc1 DISP_CC_MDSS_AHB_CLK>, + <&dispcc1 DISP_CC_MDSS_DPTX1_AUX_CLK>, + <&dispcc1 DISP_CC_MDSS_DPTX1_LINK_CLK>, + <&dispcc1 DISP_CC_MDSS_DPTX1_LINK_INTF_CLK>, + <&dispcc1 DISP_CC_MDSS_DPTX1_PIXEL0_CLK>; + clock-names = "core_iface", "core_aux", + "ctrl_link", + "ctrl_link_iface", "stream_pixel"; + interrupt-parent = <&mdss1>; + interrupts = <13>; + phys = <&mdss1_dp1_phy>; + phy-names = "dp"; + power-domains = <&rpmhpd SC8280XP_MMCX>; + + assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX1_LINK_CLK_SRC>, + <&dispcc1 DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>; + assigned-clock-parents = <&mdss1_dp1_phy 0>, <&mdss1_dp1_phy 1>; + operating-points-v2 = <&mdss1_dp1_opp_table>; + + #sound-dai-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss1_dp1_in: endpoint { + remote-endpoint = <&mdss1_intf4_out>; + }; + }; + + port@1 { + reg = <1>; + }; + }; + + mdss1_dp1_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss1_dp2: displayport-controller@2209a000 { + compatible = "qcom,sc8280xp-dp"; + reg = <0 0x2209a000 0 0x200>, + <0 0x2209a200 0 0x200>, + <0 0x2209a400 0 0x600>, + <0 0x2209b000 0 0x400>; + + clocks = <&dispcc1 DISP_CC_MDSS_AHB_CLK>, + <&dispcc1 DISP_CC_MDSS_DPTX2_AUX_CLK>, + <&dispcc1 DISP_CC_MDSS_DPTX2_LINK_CLK>, + <&dispcc1 DISP_CC_MDSS_DPTX2_LINK_INTF_CLK>, + <&dispcc1 DISP_CC_MDSS_DPTX2_PIXEL0_CLK>; + clock-names = "core_iface", "core_aux", + "ctrl_link", + "ctrl_link_iface", "stream_pixel"; + interrupt-parent = <&mdss1>; + interrupts = <14>; + phys = <&mdss1_dp2_phy>; + phy-names = "dp"; + power-domains = <&rpmhpd SC8280XP_MMCX>; + + assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX2_LINK_CLK_SRC>, + <&dispcc1 DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC>; + assigned-clock-parents = <&mdss1_dp2_phy 0>, <&mdss1_dp2_phy 1>; + operating-points-v2 = <&mdss1_dp2_opp_table>; + + #sound-dai-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss1_dp2_in: endpoint { + remote-endpoint = <&mdss1_intf6_out>; + }; + }; + + port@1 { + reg = <1>; + }; + }; + + mdss1_dp2_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss1_dp3: displayport-controller@220a0000 { + compatible = "qcom,sc8280xp-dp"; + reg = <0 0x220a0000 0 0x200>, + <0 0x220a0200 0 0x200>, + <0 0x220a0400 0 0x600>, + <0 0x220a1000 0 0x400>; + + clocks = <&dispcc1 DISP_CC_MDSS_AHB_CLK>, + <&dispcc1 DISP_CC_MDSS_DPTX3_AUX_CLK>, + <&dispcc1 DISP_CC_MDSS_DPTX3_LINK_CLK>, + <&dispcc1 DISP_CC_MDSS_DPTX3_LINK_INTF_CLK>, + <&dispcc1 DISP_CC_MDSS_DPTX3_PIXEL0_CLK>; + clock-names = "core_iface", "core_aux", + "ctrl_link", + "ctrl_link_iface", "stream_pixel"; + interrupt-parent = <&mdss1>; + interrupts = <15>; + phys = <&mdss1_dp3_phy>; + phy-names = "dp"; + power-domains = <&rpmhpd SC8280XP_MMCX>; + + assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX3_LINK_CLK_SRC>, + <&dispcc1 DISP_CC_MDSS_DPTX3_PIXEL0_CLK_SRC>; + assigned-clock-parents = <&mdss1_dp3_phy 0>, <&mdss1_dp3_phy 1>; + operating-points-v2 = <&mdss1_dp3_opp_table>; + + #sound-dai-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss1_dp3_in: endpoint { + remote-endpoint = <&mdss1_intf5_out>; + }; + }; + + port@1 { + reg = <1>; + }; + }; + + mdss1_dp3_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + }; + + mdss1_dp2_phy: phy@220c2a00 { + compatible = "qcom,sc8280xp-dp-phy"; + reg = <0 0x220c2a00 0 0x19c>, + <0 0x220c2200 0 0xec>, + <0 0x220c2600 0 0xec>, + <0 0x220c2000 0 0x1c8>; + + clocks = <&dispcc1 DISP_CC_MDSS_DPTX2_AUX_CLK>, + <&dispcc1 DISP_CC_MDSS_AHB_CLK>; + clock-names = "aux", "cfg_ahb"; + power-domains = <&rpmhpd SC8280XP_MX>; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + + mdss1_dp3_phy: phy@220c5a00 { + compatible = "qcom,sc8280xp-dp-phy"; + reg = <0 0x220c5a00 0 0x19c>, + <0 0x220c5200 0 0xec>, + <0 0x220c5600 0 0xec>, + <0 0x220c5000 0 0x1c8>; + + clocks = <&dispcc1 DISP_CC_MDSS_DPTX3_AUX_CLK>, + <&dispcc1 DISP_CC_MDSS_AHB_CLK>; + clock-names = "aux", "cfg_ahb"; + power-domains = <&rpmhpd SC8280XP_MX>; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + + dispcc1: clock-controller@22100000 { + compatible = "qcom,sc8280xp-dispcc1"; + reg = <0 0x22100000 0 0x20000>; + + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <0>, + <&mdss1_dp0_phy 0>, + <&mdss1_dp0_phy 1>, + <&mdss1_dp1_phy 0>, + <&mdss1_dp1_phy 1>, + <&mdss1_dp2_phy 0>, + <&mdss1_dp2_phy 1>, + <&mdss1_dp3_phy 0>, + <&mdss1_dp3_phy 1>, + <0>, + <0>, + <0>, + <0>; + power-domains = <&rpmhpd SC8280XP_MMCX>; + + #clock-cells = <1>; + #power-domain-cells = <1>; + #reset-cells = <1>; + + status = "disabled"; + }; }; sound: sound {