Message ID | 20230112202612.791455-2-matti.lehtimaki@gmail.com (mailing list archive) |
---|---|
State | Not Applicable |
Headers | show |
Series | Modem support for MSM8226 | expand |
Hi Matti, On Thu, Jan 12, 2023 at 10:26:04PM +0200, Matti Lehtimäki wrote: > Adds support for platforms with only single power domain. This sentence is a bit misleading. MSM8226 also has both CX and MX power domains. The difference is only the way they are exposed by the firmware and the drivers in Linux. The RPM firmware allows Linux to vote for either - Voltages (exposed as regulators in Linux), or - Performance states/"voltage corners" (exposed as power domains in Linux) For the hardware there is no difference: When using power domains the performance states are simply translated to corresponding voltages within the RPM firmware. All newer platforms have moved towards using power domains for CX and MX, so for consistency it would be preferable to do the same for MSM8226 and MSM8974. Perhaps the RPM firmware even allows using them with voltage corners? In that case you could just add PM8226 L3 to rpmpd and use it as power domain like on other platforms. For some reason I assumed this is the case for MSM8974 2.5 years ago. I have to admit I no longer remember why, and verifying this reliably is probably hard... :/ But the VDD_MX setup looks identical for MSM8974 and MSM8226 to me, so please also apply the same changes for MSM8974. I would also appreciate a small comment in the commit message that the MX voltage rail is still represented as regulator on these platforms. Also, perhaps this should even be a separate patch given that it kind of fixes what I added for MSM8974 back then. > Adds support for external power block headswitch (BHS) registers > > Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com> > --- > .../remoteproc/qcom,msm8916-mss-pil.yaml | 41 +++++++++++++++++-- > 1 file changed, 37 insertions(+), 4 deletions(-) > > diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,msm8916-mss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,msm8916-mss-pil.yaml > index 6e6e69ad9cd7..6a921f2711b2 100644 > --- a/Documentation/devicetree/bindings/remoteproc/qcom,msm8916-mss-pil.yaml > +++ b/Documentation/devicetree/bindings/remoteproc/qcom,msm8916-mss-pil.yaml > [...] > @@ -106,6 +108,15 @@ properties: > items: > - const: stop > > + qcom,ext-bhs-reg: > + $ref: /schemas/types.yaml#/definitions/phandle-array > + description: External power block headswitch (BHS) register > + (only valid for qcom,msm8226-mss-pil) > + items: > + - items: > + - description: phandle to external BHS syscon region > + - description: offset to the external BHS register > + Please disallow this (qcom,ext-bhs-reg: false) for everything except qcom,msm8226-mss-pil. > qcom,halt-regs: > $ref: /schemas/types.yaml#/definitions/phandle-array > description: > @@ -205,13 +216,35 @@ allOf: > required: > - power-domains > - power-domain-names > - else: > + > + - if: > + properties: > + compatible: > + contains: > + enum: > + - qcom,msm8909-mss-pil > + - qcom,msm8916-mss-pil > + - qcom,msm8974-mss-pil > + then: > properties: > power-domains: > maxItems: 2 > power-domain-names: > maxItems: 2 > You also need to add minItems here now. > + - if: > + properties: > + compatible: > + const: qcom,msm8226-mss-pil > + then: > + properties: > + power-domains: > + maxItems: 1 > + power-domain-names: > + maxItems: 1 > + required: > + - qcom,ext-bhs-reg And here you need to add the mx-supply as required, since you don't have it as power domain. Thanks, Stephan
On 12/01/2023 21:26, Matti Lehtimäki wrote: > Adds support for platforms with only single power domain. Add https://elixir.bootlin.com/linux/v5.17.1/source/Documentation/process/submitting-patches.rst#L95 > Adds support for external power block headswitch (BHS) registers Add. Full stop. > > Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com> > --- > .../remoteproc/qcom,msm8916-mss-pil.yaml | 41 +++++++++++++++++-- > 1 file changed, 37 insertions(+), 4 deletions(-) > > diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,msm8916-mss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,msm8916-mss-pil.yaml > index 6e6e69ad9cd7..6a921f2711b2 100644 > --- a/Documentation/devicetree/bindings/remoteproc/qcom,msm8916-mss-pil.yaml > +++ b/Documentation/devicetree/bindings/remoteproc/qcom,msm8916-mss-pil.yaml > @@ -17,6 +17,7 @@ properties: > compatible: > oneOf: > - enum: > + - qcom,msm8226-mss-pil > - qcom,msm8909-mss-pil > - qcom,msm8916-mss-pil > - qcom,msm8953-mss-pil > @@ -70,16 +71,17 @@ properties: > items: > - description: CX proxy power domain (control handed over after startup) > - description: MX proxy power domain (control handed over after startup) > + (not valid for qcom,msm8226-mss-pil) > - description: MSS proxy power domain (control handed over after startup) > (only valid for qcom,msm8953-mss-pil) > - minItems: 2 > + minItems: 1 > > power-domain-names: > items: > - const: cx > - - const: mx > + - const: mx # not valid for qcom,msm8226-mss-pil > - const: mss # only valid for qcom,msm8953-mss-pil > - minItems: 2 > + minItems: 1 > > pll-supply: > description: PLL proxy supply (control handed over after startup) > @@ -106,6 +108,15 @@ properties: > items: > - const: stop > > + qcom,ext-bhs-reg: > + $ref: /schemas/types.yaml#/definitions/phandle-array > + description: External power block headswitch (BHS) register > + (only valid for qcom,msm8226-mss-pil) > + items: > + - items: > + - description: phandle to external BHS syscon region > + - description: offset to the external BHS register > + > qcom,halt-regs: > $ref: /schemas/types.yaml#/definitions/phandle-array > description: > @@ -205,13 +216,35 @@ allOf: in this block: qcom,ext-bhs-reg: false > required: > - power-domains > - power-domain-names > - else: > + > + - if: > + properties: > + compatible: > + contains: > + enum: > + - qcom,msm8909-mss-pil > + - qcom,msm8916-mss-pil > + - qcom,msm8974-mss-pil > + then: > properties: > power-domains: > maxItems: 2 > power-domain-names: > maxItems: 2 qcom,ext-bhs-reg: false > > + - if: > + properties: > + compatible: > + const: qcom,msm8226-mss-pil > + then: > + properties: > + power-domains: > + maxItems: 1 > + power-domain-names: > + maxItems: 1 > + required: > + - qcom,ext-bhs-reg > + > - if: > properties: > compatible: Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,msm8916-mss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,msm8916-mss-pil.yaml index 6e6e69ad9cd7..6a921f2711b2 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,msm8916-mss-pil.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,msm8916-mss-pil.yaml @@ -17,6 +17,7 @@ properties: compatible: oneOf: - enum: + - qcom,msm8226-mss-pil - qcom,msm8909-mss-pil - qcom,msm8916-mss-pil - qcom,msm8953-mss-pil @@ -70,16 +71,17 @@ properties: items: - description: CX proxy power domain (control handed over after startup) - description: MX proxy power domain (control handed over after startup) + (not valid for qcom,msm8226-mss-pil) - description: MSS proxy power domain (control handed over after startup) (only valid for qcom,msm8953-mss-pil) - minItems: 2 + minItems: 1 power-domain-names: items: - const: cx - - const: mx + - const: mx # not valid for qcom,msm8226-mss-pil - const: mss # only valid for qcom,msm8953-mss-pil - minItems: 2 + minItems: 1 pll-supply: description: PLL proxy supply (control handed over after startup) @@ -106,6 +108,15 @@ properties: items: - const: stop + qcom,ext-bhs-reg: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: External power block headswitch (BHS) register + (only valid for qcom,msm8226-mss-pil) + items: + - items: + - description: phandle to external BHS syscon region + - description: offset to the external BHS register + qcom,halt-regs: $ref: /schemas/types.yaml#/definitions/phandle-array description: @@ -205,13 +216,35 @@ allOf: required: - power-domains - power-domain-names - else: + + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8909-mss-pil + - qcom,msm8916-mss-pil + - qcom,msm8974-mss-pil + then: properties: power-domains: maxItems: 2 power-domain-names: maxItems: 2 + - if: + properties: + compatible: + const: qcom,msm8226-mss-pil + then: + properties: + power-domains: + maxItems: 1 + power-domain-names: + maxItems: 1 + required: + - qcom,ext-bhs-reg + - if: properties: compatible:
Adds support for platforms with only single power domain. Adds support for external power block headswitch (BHS) registers Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com> --- .../remoteproc/qcom,msm8916-mss-pil.yaml | 41 +++++++++++++++++-- 1 file changed, 37 insertions(+), 4 deletions(-)