| Message ID | 20230320154841.327908-2-brgl@bgdev.pl (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | arm64: dts: qcom: sa8775p: add basic PMIC support | expand |
On 20.03.2023 16:48, Bartosz Golaszewski wrote: > From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> > > The file has inconsistent padding of the address part of soc node > children's reg properties. Fix it. > > Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> > --- Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Konrad > arch/arm64/boot/dts/qcom/sa8775p.dtsi | 12 ++++++------ > 1 file changed, 6 insertions(+), 6 deletions(-) > > diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi > index c5b73c591e0f..5aa28a3b12ae 100644 > --- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi > +++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi > @@ -440,7 +440,7 @@ soc: soc@0 { > > gcc: clock-controller@100000 { > compatible = "qcom,sa8775p-gcc"; > - reg = <0x0 0x100000 0x0 0xc7018>; > + reg = <0x0 0x00100000 0x0 0xc7018>; > #clock-cells = <1>; > #reset-cells = <1>; > #power-domain-cells = <1>; > @@ -464,7 +464,7 @@ gcc: clock-controller@100000 { > > ipcc: mailbox@408000 { > compatible = "qcom,sa8775p-ipcc", "qcom,ipcc"; > - reg = <0x0 0x408000 0x0 0x1000>; > + reg = <0x0 0x00408000 0x0 0x1000>; > interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; > interrupt-controller; > #interrupt-cells = <3>; > @@ -473,7 +473,7 @@ ipcc: mailbox@408000 { > > qupv3_id_1: geniqup@ac0000 { > compatible = "qcom,geni-se-qup"; > - reg = <0x0 0xac0000 0x0 0x6000>; > + reg = <0x0 0x00ac0000 0x0 0x6000>; > #address-cells = <2>; > #size-cells = <2>; > ranges; > @@ -485,7 +485,7 @@ qupv3_id_1: geniqup@ac0000 { > > uart10: serial@a8c000 { > compatible = "qcom,geni-uart"; > - reg = <0x0 0xa8c000 0x0 0x4000>; > + reg = <0x0 0x00a8c000 0x0 0x4000>; > interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; > clock-names = "se"; > clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; > @@ -735,7 +735,7 @@ rpmhpd_opp_turbo_l1: opp-9 { > > tcsr_mutex: hwlock@1f40000 { > compatible = "qcom,tcsr-mutex"; > - reg = <0x0 0x1f40000 0x0 0x20000>; > + reg = <0x0 0x01f40000 0x0 0x20000>; > #hwlock-cells = <1>; > }; > > @@ -754,7 +754,7 @@ cpufreq_hw: cpufreq@18591000 { > > tlmm: pinctrl@f000000 { > compatible = "qcom,sa8775p-tlmm"; > - reg = <0x0 0xf000000 0x0 0x1000000>; > + reg = <0x0 0x0f000000 0x0 0x1000000>; > interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; > gpio-controller; > #gpio-cells = <2>;
diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi index c5b73c591e0f..5aa28a3b12ae 100644 --- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi +++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi @@ -440,7 +440,7 @@ soc: soc@0 { gcc: clock-controller@100000 { compatible = "qcom,sa8775p-gcc"; - reg = <0x0 0x100000 0x0 0xc7018>; + reg = <0x0 0x00100000 0x0 0xc7018>; #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; @@ -464,7 +464,7 @@ gcc: clock-controller@100000 { ipcc: mailbox@408000 { compatible = "qcom,sa8775p-ipcc", "qcom,ipcc"; - reg = <0x0 0x408000 0x0 0x1000>; + reg = <0x0 0x00408000 0x0 0x1000>; interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <3>; @@ -473,7 +473,7 @@ ipcc: mailbox@408000 { qupv3_id_1: geniqup@ac0000 { compatible = "qcom,geni-se-qup"; - reg = <0x0 0xac0000 0x0 0x6000>; + reg = <0x0 0x00ac0000 0x0 0x6000>; #address-cells = <2>; #size-cells = <2>; ranges; @@ -485,7 +485,7 @@ qupv3_id_1: geniqup@ac0000 { uart10: serial@a8c000 { compatible = "qcom,geni-uart"; - reg = <0x0 0xa8c000 0x0 0x4000>; + reg = <0x0 0x00a8c000 0x0 0x4000>; interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; @@ -735,7 +735,7 @@ rpmhpd_opp_turbo_l1: opp-9 { tcsr_mutex: hwlock@1f40000 { compatible = "qcom,tcsr-mutex"; - reg = <0x0 0x1f40000 0x0 0x20000>; + reg = <0x0 0x01f40000 0x0 0x20000>; #hwlock-cells = <1>; }; @@ -754,7 +754,7 @@ cpufreq_hw: cpufreq@18591000 { tlmm: pinctrl@f000000 { compatible = "qcom,sa8775p-tlmm"; - reg = <0x0 0xf000000 0x0 0x1000000>; + reg = <0x0 0x0f000000 0x0 0x1000000>; interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; #gpio-cells = <2>;