@@ -372,7 +372,11 @@ regulators-0 {
compatible = "qcom,pm8350-rpmh-regulators";
qcom,pmic-id = "b";
+ vdd-l1-l4-supply = <&vreg_s12b>;
+ vdd-l2-l7-supply = <&vreg_bob>;
vdd-l3-l5-supply = <&vreg_s11b>;
+ vdd-l6-l9-l10-supply = <&vreg_s12b>;
+ vdd-l8-supply = <&vreg_s12b>;
vreg_s10b: smps10 {
regulator-name = "vreg_s10b";
@@ -425,7 +429,21 @@ vreg_l6b: ldo6 {
regulators-1 {
compatible = "qcom,pm8350c-rpmh-regulators";
qcom,pmic-id = "c";
+
vdd-bob-supply = <&vreg_vph_pwr>;
+ vdd-l1-l12-supply = <&vreg_s1c>;
+ vdd-l2-l8-supply = <&vreg_s1c>;
+ vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
+ vdd-l6-l9-l11-supply = <&vreg_bob>;
+ vdd-l10-supply = <&vreg_s11b>;
+
+ vreg_s1c: smps1 {
+ regulator-name = "vreg_s1c";
+ regulator-min-microvolt = <1880000>;
+ regulator-max-microvolt = <1900000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-always-on;
+ };
vreg_l1c: ldo1 {
regulator-name = "vreg_l1c";
@@ -462,6 +480,10 @@ regulators-2 {
qcom,pmic-id = "d";
vdd-l1-l4-supply = <&vreg_s11b>;
+ vdd-l2-l7-supply = <&vreg_bob>;
+ vdd-l3-l5-supply = <&vreg_s11b>;
+ vdd-l6-l9-l10-supply = <&vreg_s12b>;
+ vdd-l8-supply = <&vreg_s12b>;
vreg_l3d: ldo3 {
regulator-name = "vreg_l3d";
The s11b, s12b, s1c and bob supplies are used by several pmic regulators. Add the missing description to the devicetree. Note that there are still some consumers that are not (fully) described in the devicetree so the supplies must remain marked as always-on for now. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> --- .../qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 22 +++++++++++++++++++ 1 file changed, 22 insertions(+)