diff mbox series

[4/4] arm64: dts: qcom: msm8998: add hdmi cec pinctrl nodes

Message ID 20230418-msm8998-hdmi-cec-v1-4-176479fb2fce@freebox.fr (mailing list archive)
State Changes Requested
Headers show
Series Support HDMI CEC on Qualcomm SoCs | expand

Commit Message

Arnaud Vrac April 18, 2023, 6:10 p.m. UTC
HDMI is not enabled yet on msm8998 so the pinctrl nodes are not
used.

Signed-off-by: Arnaud Vrac <avrac@freebox.fr>
---
 arch/arm64/boot/dts/qcom/msm8998.dtsi | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

Comments

Konrad Dybcio April 22, 2023, 12:10 p.m. UTC | #1
On 18.04.2023 20:10, Arnaud Vrac wrote:
> HDMI is not enabled yet on msm8998 so the pinctrl nodes are not
> used.
> 
> Signed-off-by: Arnaud Vrac <avrac@freebox.fr>
> ---
Are they supposed to be identical?

Konrad
>  arch/arm64/boot/dts/qcom/msm8998.dtsi | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
> index b150437a83558..fb4aa376ef117 100644
> --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
> @@ -1312,6 +1312,20 @@ blsp2_i2c6_sleep: blsp2-i2c6-sleep-state {
>  				drive-strength = <2>;
>  				bias-pull-up;
>  			};
> +
> +			hdmi_cec_default: hdmi-cec-default-state {
> +				pins = "gpio31";
> +				function = "hdmi_cec";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +			};
> +
> +			hdmi_cec_sleep: hdmi-cec-sleep-state {
> +				pins = "gpio31";
> +				function = "hdmi_cec";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +			};
>  		};
>  
>  		remoteproc_mss: remoteproc@4080000 {
>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index b150437a83558..fb4aa376ef117 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -1312,6 +1312,20 @@  blsp2_i2c6_sleep: blsp2-i2c6-sleep-state {
 				drive-strength = <2>;
 				bias-pull-up;
 			};
+
+			hdmi_cec_default: hdmi-cec-default-state {
+				pins = "gpio31";
+				function = "hdmi_cec";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hdmi_cec_sleep: hdmi-cec-sleep-state {
+				pins = "gpio31";
+				function = "hdmi_cec";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
 		};
 
 		remoteproc_mss: remoteproc@4080000 {