diff mbox series

[v3,12/15] arm64: dts: qcom: sm6125: Switch fixed xo_board clock to RPM XO clock

Message ID 20230718-sm6125-dpu-v3-12-6c5a56e99820@somainline.org (mailing list archive)
State Superseded
Headers show
Series drm/msm: Add SM6125 MDSS/DPU hardware and enable Sony Xperia 10 II panel | expand

Commit Message

Marijn Suijten July 18, 2023, 9:24 p.m. UTC 
We have a working RPM XO clock; no other driver except rpmcc should be
parenting directly to the fixed-factor xo_board clock nor should it be
reachable by that global name.  Remove the name to that effect, so that
every clock relation is explicitly defined in DTS.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
---
 arch/arm64/boot/dts/qcom/sm6125.dtsi | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi
index cfd0901d4555..90e242ad7943 100644
--- a/arch/arm64/boot/dts/qcom/sm6125.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi
@@ -23,7 +23,6 @@  xo_board: xo-board {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <19200000>;
-			clock-output-names = "xo_board";
 		};
 
 		sleep_clk: sleep-clk {
@@ -199,6 +198,8 @@  rpm_requests: rpm-requests {
 				rpmcc: clock-controller {
 					compatible = "qcom,rpmcc-sm6125", "qcom,rpmcc";
 					#clock-cells = <1>;
+					clocks = <&xo_board>;
+					clock-names = "xo";
 				};
 
 				rpmpd: power-controller {
@@ -718,7 +719,7 @@  sdhc_1: mmc@4744000 {
 
 			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
 				 <&gcc GCC_SDCC1_APPS_CLK>,
-				 <&xo_board>;
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
 			clock-names = "iface", "core", "xo";
 			iommus = <&apps_smmu 0x160 0x0>;
 
@@ -745,7 +746,7 @@  sdhc_2: mmc@4784000 {
 
 			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
 				 <&gcc GCC_SDCC2_APPS_CLK>,
-				 <&xo_board>;
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
 			clock-names = "iface", "core", "xo";
 			iommus = <&apps_smmu 0x180 0x0>;