diff mbox series

[V3] scsi: ufs: qcom: Align programming sequence as per HW spec

Message ID 20230809151243.17531-1-quic_nitirawa@quicinc.com (mailing list archive)
State Superseded
Headers show
Series [V3] scsi: ufs: qcom: Align programming sequence as per HW spec | expand

Commit Message

Nitin Rawat Aug. 9, 2023, 3:12 p.m. UTC 
Align clock configuration as per Qualcomm UFS controller
hardware specification.

This change updates UFS_SYS1CLK_1US, CORE_CLK_1US_CYCLES,
PA_VS_CORE_CLK_40NS_CYCLES timer configuration for Qunipro
and UTP to align with Qualcomm UFS HW specification.

Co-developed-by: Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com>
Signed-off-by: Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com>
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
---

Changes from v2:
- Addressed bao comment, removed duplicate clock timer cfg API call

Changes from v1:
- Addressed bao comment, removed wrapper function
- Tab alignment
---
 drivers/ufs/host/ufs-qcom.c | 261 ++++++++++++++++++++++++++----------
 drivers/ufs/host/ufs-qcom.h |  20 ++-
 2 files changed, 207 insertions(+), 74 deletions(-)

--
2.17.1

Comments

Bao D. Nguyen Aug. 9, 2023, 5:06 p.m. UTC | #1 
On 8/9/2023 8:12 AM, Nitin Rawat wrote:
> Align clock configuration as per Qualcomm UFS controller
> hardware specification.
> 
> This change updates UFS_SYS1CLK_1US, CORE_CLK_1US_CYCLES,
> PA_VS_CORE_CLK_40NS_CYCLES timer configuration for Qunipro
> and UTP to align with Qualcomm UFS HW specification.
> 
> Co-developed-by: Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com>
> Signed-off-by: Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com>
> Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
> ---
> 

Reviewed-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Bjorn Andersson Aug. 10, 2023, 2:41 p.m. UTC | #2 
On Wed, Aug 09, 2023 at 08:42:43PM +0530, Nitin Rawat wrote:
> Align clock configuration as per Qualcomm UFS controller
> hardware specification.
> 
> This change updates UFS_SYS1CLK_1US, CORE_CLK_1US_CYCLES,
> PA_VS_CORE_CLK_40NS_CYCLES timer configuration for Qunipro
> and UTP to align with Qualcomm UFS HW specification.

"Code is wrong, make code right"


I find it hard to believe that "the clock configuration is wrong" takes
207 lines of code to address.

Please instead describe the problem you're solving, to ensure that
current and future readers of this commit message have a chance to
understand why this change was made.

The "describing your changes" section in the documentation is good,
please read it:
https://docs.kernel.org/process/submitting-patches.html#describe-your-changes

Regards,
Bjorn
Nitin Rawat Aug. 14, 2023, 2:37 p.m. UTC | #3 
Hi Bjorn,

I've updated the commit message in latest Patchset. Please can you help 
review.

Regards,
Nitin


On 8/10/2023 8:11 PM, Bjorn Andersson wrote:
> On Wed, Aug 09, 2023 at 08:42:43PM +0530, Nitin Rawat wrote:
>> Align clock configuration as per Qualcomm UFS controller
>> hardware specification.
>>
>> This change updates UFS_SYS1CLK_1US, CORE_CLK_1US_CYCLES,
>> PA_VS_CORE_CLK_40NS_CYCLES timer configuration for Qunipro
>> and UTP to align with Qualcomm UFS HW specification.
> 
> "Code is wrong, make code right"
> 
> 
> I find it hard to believe that "the clock configuration is wrong" takes
> 207 lines of code to address.
> 
> Please instead describe the problem you're solving, to ensure that
> current and future readers of this commit message have a chance to
> understand why this change was made.
> 
> The "describing your changes" section in the documentation is good,
> please read it:
> https://docs.kernel.org/process/submitting-patches.html#describe-your-changes
> 
> Regards,
> Bjorn
diff mbox series

Patch

diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
index e7164ce7336b..a2876c3d50d9 100644
--- a/drivers/ufs/host/ufs-qcom.c
+++ b/drivers/ufs/host/ufs-qcom.c
@@ -91,10 +91,7 @@  struct __ufs_qcom_bw_table {
 };

 static struct ufs_qcom_host *ufs_qcom_hosts[MAX_UFS_QCOM_HOSTS];
-
 static void ufs_qcom_get_default_testbus_cfg(struct ufs_qcom_host *host);
-static int ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(struct ufs_hba *hba,
-						       u32 clk_cycles);

 static struct ufs_qcom_host *rcdev_to_ufs_host(struct reset_controller_dev *rcd)
 {
@@ -532,7 +529,8 @@  static int ufs_qcom_hce_enable_notify(struct ufs_hba *hba,
  * Return: zero for success and non-zero in case of a failure.
  */
 static int ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear,
-			       u32 hs, u32 rate, bool update_link_startup_timer)
+				 u32 hs, u32 rate, bool link_startup,
+				 bool is_pre_scale_up)
 {
 	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
 	struct ufs_clk_info *clki;
@@ -563,11 +561,16 @@  static int ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear,
 	/*
 	 * The Qunipro controller does not use following registers:
 	 * SYS1CLK_1US_REG, TX_SYMBOL_CLK_1US_REG, CLK_NS_REG &
-	 * UFS_REG_PA_LINK_STARTUP_TIMER
-	 * But UTP controller uses SYS1CLK_1US_REG register for Interrupt
-	 * Aggregation logic.
-	*/
-	if (ufs_qcom_cap_qunipro(host) && !ufshcd_is_intr_aggr_allowed(hba))
+	 * UFS_REG_PA_LINK_STARTUP_TIMER.
+	 * However UTP controller uses SYS1CLK_1US_REG register for Interrupt
+	 * Aggregation logic and Auto hibern8 logic.
+	 * It is mandatory to write SYS1CLK_1US_REG register on UFS host
+	 * controller V4.0.0 onwards.
+	 */
+	if (ufs_qcom_cap_qunipro(host) &&
+	    !(ufshcd_is_intr_aggr_allowed(hba) ||
+	    ufshcd_is_auto_hibern8_supported(hba) ||
+	    host->hw_ver.major >= 4))
 		return 0;

 	if (gear == 0) {
@@ -576,8 +579,14 @@  static int ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear,
 	}

 	list_for_each_entry(clki, &hba->clk_list_head, list) {
-		if (!strcmp(clki->name, "core_clk"))
-			core_clk_rate = clk_get_rate(clki->clk);
+		if (!strcmp(clki->name, "core_clk")) {
+			if (is_pre_scale_up)
+				core_clk_rate = clki->max_freq;
+			else
+				core_clk_rate = clk_get_rate(clki->clk);
+			break;
+		}
+
 	}

 	/* If frequency is smaller than 1MHz, set to 1MHz */
@@ -657,7 +666,7 @@  static int ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear,
 		mb();
 	}

-	if (update_link_startup_timer && host->hw_ver.major != 0x5) {
+	if (link_startup && host->hw_ver.major != 0x5) {
 		ufshcd_writel(hba, ((core_clk_rate / MSEC_PER_SEC) * 100),
 			      REG_UFS_CFG0);
 		/*
@@ -670,6 +679,105 @@  static int ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear,
 	return 0;
 }

+static int ufs_qcom_set_core_clk_ctrl(struct ufs_hba *hba,
+				      u32 clk_1us_cycles,
+				      u32 clk_40ns_cycles,
+				      bool scale_up)
+{
+	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+	u32 mask = MAX_CORE_CLK_1US_CYCLES_MASK;
+	u32 offset = 0;
+	u32 reg;
+	int err;
+
+	/* Bit mask and offset changed on UFS host controller V4.0.0 onwards */
+	if (host->hw_ver.major >= 4) {
+		mask = MAX_CORE_CLK_1US_CYCLES_MASK_V4;
+		offset = MAX_CORE_CLK_1US_CYCLES_OFFSET_V4;
+	}
+
+	if (clk_1us_cycles > mask)
+		return -EINVAL;
+
+	err = ufshcd_dme_get(hba, UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL), &reg);
+	if (err)
+		return err;
+
+	reg &= ~(mask << offset);
+	reg |= clk_1us_cycles << offset;
+
+	if (scale_up)
+		reg |= CORE_CLK_DIV_EN_BIT;
+
+	err = ufshcd_dme_set(hba, UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL), reg);
+	if (err)
+		return err;
+
+	/*
+	 * UFS host controller V4.0.0 onwards needs to program
+	 * PA_VS_CORE_CLK_40NS_CYCLES attribute per programmed
+	 * frequency of unipro core clk of UFS host controller.
+	 */
+	if (host->hw_ver.major >= 4) {
+		if (clk_40ns_cycles > PA_VS_CORE_CLK_40NS_CYCLES_MASK)
+			return -EINVAL;
+
+		err = ufshcd_dme_get(hba,
+				     UIC_ARG_MIB(PA_VS_CORE_CLK_40NS_CYCLES),
+				     &reg);
+		if (err)
+			return err;
+
+		reg &= ~PA_VS_CORE_CLK_40NS_CYCLES_MASK;
+		reg |= clk_40ns_cycles;
+
+		err = ufshcd_dme_set(hba,
+				     UIC_ARG_MIB(PA_VS_CORE_CLK_40NS_CYCLES),
+				     reg);
+	}
+
+	return err;
+}
+
+static int ufs_qcom_cfg_core_clk_ctrl(struct ufs_hba *hba)
+{
+	struct list_head *head = &hba->clk_list_head;
+	struct ufs_clk_info *clki;
+	u32 max_freq = 0;
+	int err;
+
+	list_for_each_entry(clki, head, list) {
+		if (!IS_ERR_OR_NULL(clki->clk) &&
+		    (!strcmp(clki->name, "core_clk_unipro"))) {
+			max_freq = clki->max_freq;
+			break;
+		}
+	}
+
+	switch (max_freq) {
+	case MHZ_403:
+		err = ufs_qcom_set_core_clk_ctrl(hba, 403, 16, true);
+		break;
+	case MHZ_300:
+		err = ufs_qcom_set_core_clk_ctrl(hba, 300, 12, true);
+		break;
+	case MHZ_201_5:
+		err = ufs_qcom_set_core_clk_ctrl(hba, 202, 8, true);
+		break;
+	case MHZ_150:
+		err = ufs_qcom_set_core_clk_ctrl(hba, 150, 6, true);
+		break;
+	case MHZ_100:
+		err = ufs_qcom_set_core_clk_ctrl(hba, 100, 4, true);
+		break;
+	default:
+		dev_err(hba->dev, "unipro max_freq=%u entry missing\n", max_freq);
+		err = -EINVAL;
+		break;
+	}
+
+	return err;
+}
 static int ufs_qcom_link_startup_notify(struct ufs_hba *hba,
 					enum ufs_notify_change_status status)
 {
@@ -679,19 +787,21 @@  static int ufs_qcom_link_startup_notify(struct ufs_hba *hba,
 	switch (status) {
 	case PRE_CHANGE:
 		if (ufs_qcom_cfg_timers(hba, UFS_PWM_G1, SLOWAUTO_MODE,
-					0, true)) {
+					0, true, false)) {
 			dev_err(hba->dev, "%s: ufs_qcom_cfg_timers() failed\n",
 				__func__);
 			return -EINVAL;
 		}

-		if (ufs_qcom_cap_qunipro(host))
-			/*
-			 * set unipro core clock cycles to 150 & clear clock
-			 * divider
-			 */
-			err = ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(hba,
-									  150);
+		if (ufs_qcom_cap_qunipro(host)) {
+			err = ufs_qcom_cfg_core_clk_ctrl(hba);
+			if (err) {
+				dev_err(hba->dev,
+					"%s cfg core clk ctrl failed\n",
+					__func__);
+				return err;
+			}
+		}

 		/*
 		 * Some UFS devices (and may be host) have issues if LCC is
@@ -926,7 +1036,7 @@  static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba,
 	case POST_CHANGE:
 		if (ufs_qcom_cfg_timers(hba, dev_req_params->gear_rx,
 					dev_req_params->pwr_rx,
-					dev_req_params->hs_rate, false)) {
+					dev_req_params->hs_rate, false, false)) {
 			dev_err(hba->dev, "%s: ufs_qcom_cfg_timers() failed\n",
 				__func__);
 			/*
@@ -1296,69 +1406,52 @@  static void ufs_qcom_exit(struct ufs_hba *hba)
 	phy_exit(host->generic_phy);
 }

-static int ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(struct ufs_hba *hba,
-						       u32 clk_cycles)
+static int ufs_qcom_clk_scale_up_pre_change(struct ufs_hba *hba)
 {
-	int err;
-	u32 core_clk_ctrl_reg;
-
-	if (clk_cycles > DME_VS_CORE_CLK_CTRL_MAX_CORE_CLK_1US_CYCLES_MASK)
-		return -EINVAL;
-
-	err = ufshcd_dme_get(hba,
-			    UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL),
-			    &core_clk_ctrl_reg);
-	if (err)
-		return err;
-
-	core_clk_ctrl_reg &= ~DME_VS_CORE_CLK_CTRL_MAX_CORE_CLK_1US_CYCLES_MASK;
-	core_clk_ctrl_reg |= clk_cycles;
-
-	/* Clear CORE_CLK_DIV_EN */
-	core_clk_ctrl_reg &= ~DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT;
+	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+	struct ufs_pa_layer_attr *attr = &host->dev_req_params;
+	int err = 0;

-	return ufshcd_dme_set(hba,
-			    UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL),
-			    core_clk_ctrl_reg);
-}
+	if (!ufs_qcom_cap_qunipro(host))
+		goto out;

-static int ufs_qcom_clk_scale_up_pre_change(struct ufs_hba *hba)
-{
-	/* nothing to do as of now */
-	return 0;
+	if (attr) {
+		err = ufs_qcom_cfg_timers(hba, attr->gear_rx,
+					    attr->pwr_rx, attr->hs_rate,
+					    false, true);
+		if (err)
+			dev_err(hba->dev, "%s ufs cfg timer failed\n",
+					  __func__);
+	}
+	err = ufs_qcom_cfg_core_clk_ctrl(hba);
+out:
+	return err;
 }

 static int ufs_qcom_clk_scale_up_post_change(struct ufs_hba *hba)
 {
-	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
-
-	if (!ufs_qcom_cap_qunipro(host))
-		return 0;
-
-	/* set unipro core clock cycles to 150 and clear clock divider */
-	return ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(hba, 150);
+	return 0;
 }

 static int ufs_qcom_clk_scale_down_pre_change(struct ufs_hba *hba)
 {
 	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
 	int err;
-	u32 core_clk_ctrl_reg;
+	u32 reg;

 	if (!ufs_qcom_cap_qunipro(host))
 		return 0;

-	err = ufshcd_dme_get(hba,
-			    UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL),
-			    &core_clk_ctrl_reg);
+	err = ufshcd_dme_get(hba, UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL), &reg);
+	if (err)
+		return err;

 	/* make sure CORE_CLK_DIV_EN is cleared */
-	if (!err &&
-	    (core_clk_ctrl_reg & DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT)) {
-		core_clk_ctrl_reg &= ~DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT;
+	if (reg & CORE_CLK_DIV_EN_BIT) {
+		reg &= ~CORE_CLK_DIV_EN_BIT;
 		err = ufshcd_dme_set(hba,
 				    UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL),
-				    core_clk_ctrl_reg);
+				    reg);
 	}

 	return err;
@@ -1367,19 +1460,50 @@  static int ufs_qcom_clk_scale_down_pre_change(struct ufs_hba *hba)
 static int ufs_qcom_clk_scale_down_post_change(struct ufs_hba *hba)
 {
 	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+	struct ufs_pa_layer_attr *attr = &host->dev_req_params;
+	struct list_head *head = &hba->clk_list_head;
+	struct ufs_clk_info *clki;
+	u32 curr_freq = 0;
+	int err;

 	if (!ufs_qcom_cap_qunipro(host))
 		return 0;

-	/* set unipro core clock cycles to 75 and clear clock divider */
-	return ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(hba, 75);
+	if (attr)
+		ufs_qcom_cfg_timers(hba, attr->gear_rx, attr->pwr_rx,
+				    attr->hs_rate, false, false);
+
+	list_for_each_entry(clki, head, list) {
+		if (!IS_ERR_OR_NULL(clki->clk) &&
+		    (!strcmp(clki->name, "core_clk_unipro"))) {
+			curr_freq = clk_get_rate(clki->clk);
+			break;
+		}
+	}
+
+	switch (curr_freq) {
+	case MHZ_37_5:
+		err = ufs_qcom_set_core_clk_ctrl(hba, 38, 2, false);
+		break;
+	case MHZ_75:
+		err = ufs_qcom_set_core_clk_ctrl(hba, 75, 3, false);
+		break;
+	case MHZ_100:
+		err = ufs_qcom_set_core_clk_ctrl(hba, 100, 4, false);
+		break;
+	default:
+		err = -EINVAL;
+		dev_err(hba->dev, "unipro curr_freq=%u entry missing\n", curr_freq);
+		break;
+	}
+
+	return err;
 }

 static int ufs_qcom_clk_scale_notify(struct ufs_hba *hba,
 		bool scale_up, enum ufs_notify_change_status status)
 {
 	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
-	struct ufs_pa_layer_attr *dev_req_params = &host->dev_req_params;
 	int err = 0;

 	if (status == PRE_CHANGE) {
@@ -1405,11 +1529,6 @@  static int ufs_qcom_clk_scale_notify(struct ufs_hba *hba,
 			return err;
 		}

-		ufs_qcom_cfg_timers(hba,
-				    dev_req_params->gear_rx,
-				    dev_req_params->pwr_rx,
-				    dev_req_params->hs_rate,
-				    false);
 		ufs_qcom_icc_update_bw(host);
 		ufshcd_uic_hibern8_exit(hba);
 	}
diff --git a/drivers/ufs/host/ufs-qcom.h b/drivers/ufs/host/ufs-qcom.h
index d6f8e74bd538..d10234f6280b 100644
--- a/drivers/ufs/host/ufs-qcom.h
+++ b/drivers/ufs/host/ufs-qcom.h
@@ -79,6 +79,17 @@  enum {
 	UFS_MEM_CQIS_VS		= 0x8,
 };

+
+/* QCOM UFS host controller core clk frequencies */
+#define MHZ_37_5	37500000
+#define MHZ_50		50000000
+#define MHZ_75		75000000
+#define MHZ_100		100000000
+#define MHZ_150		150000000
+#define MHZ_300		300000000
+#define MHZ_201_5	201500000
+#define MHZ_403		403000000
+
 #define UFS_CNTLR_2_x_x_VEN_REGS_OFFSET(x)	(0x000 + x)
 #define UFS_CNTLR_3_x_x_VEN_REGS_OFFSET(x)	(0x400 + x)

@@ -129,9 +140,12 @@  enum {
 #define PA_VS_CONFIG_REG1	0x9000
 #define DME_VS_CORE_CLK_CTRL	0xD002
 /* bit and mask definitions for DME_VS_CORE_CLK_CTRL attribute */
-#define DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT		BIT(8)
-#define DME_VS_CORE_CLK_CTRL_MAX_CORE_CLK_1US_CYCLES_MASK	0xFF
-
+#define MAX_CORE_CLK_1US_CYCLES_MASK_V4		0xFFF
+#define MAX_CORE_CLK_1US_CYCLES_OFFSET_V4	0x10
+#define MAX_CORE_CLK_1US_CYCLES_MASK		0xFF
+#define CORE_CLK_DIV_EN_BIT			BIT(8)
+#define PA_VS_CORE_CLK_40NS_CYCLES		0x9007
+#define PA_VS_CORE_CLK_40NS_CYCLES_MASK		0x3F
 static inline void
 ufs_qcom_get_controller_revision(struct ufs_hba *hba,
 				 u8 *major, u16 *minor, u16 *step)