| Message ID | 20230810061140.15608-2-quic_kbajaj@quicinc.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | soc: qcom: llcc: Add support for QDU1000/QRU1000 | expand |
On Thu, 10 Aug 2023 11:41:35 +0530, Komal Bajaj wrote: > Add LLCC compatible for QDU1000/QRU1000 SoCs and add optional > nvmem-cells and nvmem-cell-names properties to support multiple > configurations for multi channel DDR. > > Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com> > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > --- > Documentation/devicetree/bindings/cache/qcom,llcc.yaml | 10 ++++++++++ > 1 file changed, 10 insertions(+) > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230810061140.15608-2-quic_kbajaj@quicinc.com The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
On 8/10/2023 12:50 PM, Rob Herring wrote: > On Thu, 10 Aug 2023 11:41:35 +0530, Komal Bajaj wrote: >> Add LLCC compatible for QDU1000/QRU1000 SoCs and add optional >> nvmem-cells and nvmem-cell-names properties to support multiple >> configurations for multi channel DDR. >> >> Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com> >> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> >> --- >> Documentation/devicetree/bindings/cache/qcom,llcc.yaml | 10 ++++++++++ >> 1 file changed, 10 insertions(+) >> > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' > on your patch (DT_CHECKER_FLAGS is new in v5.13): > > yamllint warnings/errors: > > dtschema/dtc warnings/errors: > > > doc reference errors (make refcheckdocs): > > See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230810061140.15608-2-quic_kbajaj@quicinc.com > > The base for the series is generally the latest rc1. A different dependency > should be noted in *this* patch. > > If you already ran 'make dt_binding_check' and didn't see the above > error(s), then make sure 'yamllint' is installed and dt-schema is up to > date: > > pip3 install dtschema --upgrade > > Please check and re-submit after running the above command yourself. Note > that DT_SCHEMA_FILES can be set to your schema file to speed up checking > your schema. However, it must be unset to test all examples with your schema. Hi Rob, I did run the same steps locally after upgrading dtschema too, but it didn't reported any kind of error. Here also, error is not mentioned, can you please state what's the error reported with this patch? Thanks Komal >
On Thu, Aug 10, 2023 at 4:27 AM Komal Bajaj <quic_kbajaj@quicinc.com> wrote: > > > > On 8/10/2023 12:50 PM, Rob Herring wrote: > > On Thu, 10 Aug 2023 11:41:35 +0530, Komal Bajaj wrote: > >> Add LLCC compatible for QDU1000/QRU1000 SoCs and add optional > >> nvmem-cells and nvmem-cell-names properties to support multiple > >> configurations for multi channel DDR. > >> > >> Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com> > >> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > >> --- > >> Documentation/devicetree/bindings/cache/qcom,llcc.yaml | 10 ++++++++++ > >> 1 file changed, 10 insertions(+) > >> > > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' > > on your patch (DT_CHECKER_FLAGS is new in v5.13): > > > > yamllint warnings/errors: > > > > dtschema/dtc warnings/errors: > > > > > > doc reference errors (make refcheckdocs): > > > > See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230810061140.15608-2-quic_kbajaj@quicinc.com > > > > The base for the series is generally the latest rc1. A different dependency > > should be noted in *this* patch. > > > > If you already ran 'make dt_binding_check' and didn't see the above > > error(s), then make sure 'yamllint' is installed and dt-schema is up to > > date: > > > > pip3 install dtschema --upgrade > > > > Please check and re-submit after running the above command yourself. Note > > that DT_SCHEMA_FILES can be set to your schema file to speed up checking > > your schema. However, it must be unset to test all examples with your schema. > > Hi Rob, > I did run the same steps locally after upgrading dtschema too, but it > didn't reported any kind of error. > Here also, error is not mentioned, can you please state what's the error > reported with this patch? No error. It's a problem with the bot's CI job. Rob
diff --git a/Documentation/devicetree/bindings/cache/qcom,llcc.yaml b/Documentation/devicetree/bindings/cache/qcom,llcc.yaml index 44892aa589fd..580f9a97ddf7 100644 --- a/Documentation/devicetree/bindings/cache/qcom,llcc.yaml +++ b/Documentation/devicetree/bindings/cache/qcom,llcc.yaml @@ -20,6 +20,7 @@ description: | properties: compatible: enum: + - qcom,qdu1000-llcc - qcom,sc7180-llcc - qcom,sc7280-llcc - qcom,sc8180x-llcc @@ -44,6 +45,14 @@ properties: interrupts: maxItems: 1 + nvmem-cells: + items: + - description: Reference to an nvmem node for multi channel DDR + + nvmem-cell-names: + items: + - const: multi-chan-ddr + required: - compatible - reg @@ -92,6 +101,7 @@ allOf: compatible: contains: enum: + - qcom,qdu1000-llcc - qcom,sc8180x-llcc - qcom,sc8280xp-llcc then: