| Message ID | 20230830-fp5-initial-v1-3-5a954519bbad@fairphone.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Initial support for the Fairphone 5 smartphone | expand |
On Wed Aug 30, 2023 at 12:09 PM CEST, Konrad Dybcio wrote: > On 30.08.2023 11:58, Luca Weiss wrote: > > On non-ChromeOS boards the clock cannot be touched, so move it in the > > chrome-common dtsi which is the only place where it's needed. > > > > Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> > > --- > If that clock is not registered (e.g. it's in protected-clocks = <>, > would the _optional handler not handle it just fine? Right, that appears to work! ~ # ls -d /sys/bus/platform/drivers/qcom,qfprom/*.efuse /sys/bus/platform/drivers/qcom,qfprom/784000.efuse ~ # cat /sys/firmware/devicetree/base/soc@0/efuse@784000/clock-names; echo core ~ # hexdump -C /sys/firmware/devicetree/base/soc@0/efuse@784000/clocks 00000000 00 00 00 03 00 00 00 b8 |........| 00000008 Never tested this case before, but since it appears to work with the patched qfprom driver (other patch in this series) I think we can drop this patch. Will also have to adjust some other patches in my local tree then that do similar things ;) Regards Luca > > Konrad
diff --git a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi index 8eb30aa226a2..6cfcec1eabd9 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi @@ -59,6 +59,11 @@ &pmk8350_pon { status = "disabled"; }; +&qfprom { + clocks = <&gcc GCC_SEC_CTRL_CLK_SRC>; + clock-names = "core"; +}; + /* * Chrome designs always boot from SPI flash hooked up to the qspi. * diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index 98a8d627a348..5c78038369fd 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -897,8 +897,6 @@ qfprom: efuse@784000 { <0 0x00780000 0 0xa20>, <0 0x00782000 0 0x120>, <0 0x00786000 0 0x1fff>; - clocks = <&gcc GCC_SEC_CTRL_CLK_SRC>; - clock-names = "core"; power-domains = <&rpmhpd SC7280_MX>; #address-cells = <1>; #size-cells = <1>;
On non-ChromeOS boards the clock cannot be touched, so move it in the chrome-common dtsi which is the only place where it's needed. Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> --- arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi | 5 +++++ arch/arm64/boot/dts/qcom/sc7280.dtsi | 2 -- 2 files changed, 5 insertions(+), 2 deletions(-)