| Message ID | 20230922224027.85291-3-matti.lehtimaki@gmail.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | MPM pin mappings for MSM8226 and MSM8974 | expand |
On Samstag, 23. September 2023 00:40:27 CEST Matti Lehtimäki wrote: > Add pin <-> wakeirq mappings to allow for waking up the AP from sleep > through MPM-connected pins. > > Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com> Based on the discussion in the 8226 patch, this looks correct, compared with downstream arch/arm/boot/dts/msm8974pro-pm.dtsi. Reviewed-by: Luca Weiss <luca@z3ntu.xyz> > --- > drivers/pinctrl/qcom/pinctrl-msm8x74.c | 12 ++++++++++++ > 1 file changed, 12 insertions(+) > > diff --git a/drivers/pinctrl/qcom/pinctrl-msm8x74.c > b/drivers/pinctrl/qcom/pinctrl-msm8x74.c index d5fe62992849..238c83f6ec4f > 100644 > --- a/drivers/pinctrl/qcom/pinctrl-msm8x74.c > +++ b/drivers/pinctrl/qcom/pinctrl-msm8x74.c > @@ -1045,6 +1045,16 @@ static const struct msm_pingroup msm8x74_groups[] = { > > #define NUM_GPIO_PINGROUPS 146 > > +static const struct msm_gpio_wakeirq_map msm8x74_mpm_map[] = { > + { 1, 4 }, { 5, 5 }, { 9, 6 }, { 18, 7 }, { 20, 8 }, { 24, 9 }, > + { 27, 10 }, { 28, 11 }, { 34, 12 }, { 35, 13 }, { 37, 14 }, { 42, 15 }, > + { 44, 16 }, { 46, 17 }, { 50, 18 }, { 54, 19 }, { 59, 20 }, { 61, 21 }, > + { 62, 22 }, { 64, 23 }, { 65, 24 }, { 66, 25 }, { 67, 26 }, { 68, 27 }, > + { 71, 28 }, { 72, 29 }, { 73, 30 }, { 74, 31 }, { 75, 32 }, { 77, 33 }, > + { 79, 34 }, { 80, 35 }, { 82, 36 }, { 86, 37 }, { 92, 38 }, { 93, 39 }, > + { 95, 40 }, { 102, 3 }, { 144, 41 }, > +}; > + > static const struct msm_pinctrl_soc_data msm8x74_pinctrl = { > .pins = msm8x74_pins, > .npins = ARRAY_SIZE(msm8x74_pins), > @@ -1053,6 +1063,8 @@ static const struct msm_pinctrl_soc_data > msm8x74_pinctrl = { .groups = msm8x74_groups, > .ngroups = ARRAY_SIZE(msm8x74_groups), > .ngpios = NUM_GPIO_PINGROUPS, > + .wakeirq_map = msm8x74_mpm_map, > + .nwakeirq_map = ARRAY_SIZE(msm8x74_mpm_map), > }; > > static int msm8x74_pinctrl_probe(struct platform_device *pdev)
diff --git a/drivers/pinctrl/qcom/pinctrl-msm8x74.c b/drivers/pinctrl/qcom/pinctrl-msm8x74.c index d5fe62992849..238c83f6ec4f 100644 --- a/drivers/pinctrl/qcom/pinctrl-msm8x74.c +++ b/drivers/pinctrl/qcom/pinctrl-msm8x74.c @@ -1045,6 +1045,16 @@ static const struct msm_pingroup msm8x74_groups[] = { #define NUM_GPIO_PINGROUPS 146 +static const struct msm_gpio_wakeirq_map msm8x74_mpm_map[] = { + { 1, 4 }, { 5, 5 }, { 9, 6 }, { 18, 7 }, { 20, 8 }, { 24, 9 }, + { 27, 10 }, { 28, 11 }, { 34, 12 }, { 35, 13 }, { 37, 14 }, { 42, 15 }, + { 44, 16 }, { 46, 17 }, { 50, 18 }, { 54, 19 }, { 59, 20 }, { 61, 21 }, + { 62, 22 }, { 64, 23 }, { 65, 24 }, { 66, 25 }, { 67, 26 }, { 68, 27 }, + { 71, 28 }, { 72, 29 }, { 73, 30 }, { 74, 31 }, { 75, 32 }, { 77, 33 }, + { 79, 34 }, { 80, 35 }, { 82, 36 }, { 86, 37 }, { 92, 38 }, { 93, 39 }, + { 95, 40 }, { 102, 3 }, { 144, 41 }, +}; + static const struct msm_pinctrl_soc_data msm8x74_pinctrl = { .pins = msm8x74_pins, .npins = ARRAY_SIZE(msm8x74_pins), @@ -1053,6 +1063,8 @@ static const struct msm_pinctrl_soc_data msm8x74_pinctrl = { .groups = msm8x74_groups, .ngroups = ARRAY_SIZE(msm8x74_groups), .ngpios = NUM_GPIO_PINGROUPS, + .wakeirq_map = msm8x74_mpm_map, + .nwakeirq_map = ARRAY_SIZE(msm8x74_mpm_map), }; static int msm8x74_pinctrl_probe(struct platform_device *pdev)
Add pin <-> wakeirq mappings to allow for waking up the AP from sleep through MPM-connected pins. Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com> --- drivers/pinctrl/qcom/pinctrl-msm8x74.c | 12 ++++++++++++ 1 file changed, 12 insertions(+)