diff mbox series

[1/4] dt-bindings: clock: qcom,camcc.yaml: Convert qcom,camcc to a single yaml file

Message ID 20230923150045.1068556-2-bryan.odonoghue@linaro.org (mailing list archive)
State Superseded
Headers show
Series Add sc8280xp CAMCC bindings and driver | expand

Commit Message

Bryan O'Donoghue Sept. 23, 2023, 3 p.m. UTC 
Move the various camcc yaml files into one. The Camera Clock Controller
is pretty similar from SoC to SoC.

Mostly we have some SoCs which require fewer clocks than others. In some
cases we have SoCs which have required-opps and required-power-domains.

It is likely we could and should extend the thin CAMCC descriptions such
as sdm845 an sm6350 to the more robust descriptions such as sm8250 and
sm8450.

As a result of listing sm8250 and sm8450 together required-opps and
power-domains become required for sm8250, which is a NOP for the dtsi
since both declarations already exist for sm8250.

sm8250 is also chosen as the example for the new combined camcc.yaml.

A minor tweak to fix Bjorn's email address in the Maintainer list is
included.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 .../bindings/clock/qcom,camcc-sm8250.yaml     |  84 ---------
 .../devicetree/bindings/clock/qcom,camcc.yaml | 171 ++++++++++++++++++
 .../bindings/clock/qcom,sc7180-camcc.yaml     |  72 --------
 .../bindings/clock/qcom,sc7280-camcc.yaml     |  71 --------
 .../bindings/clock/qcom,sdm845-camcc.yaml     |  65 -------
 .../bindings/clock/qcom,sm6350-camcc.yaml     |  49 -----
 .../bindings/clock/qcom,sm8450-camcc.yaml     |  85 ---------
 7 files changed, 171 insertions(+), 426 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/clock/qcom,camcc-sm8250.yaml
 create mode 100644 Documentation/devicetree/bindings/clock/qcom,camcc.yaml
 delete mode 100644 Documentation/devicetree/bindings/clock/qcom,sc7180-camcc.yaml
 delete mode 100644 Documentation/devicetree/bindings/clock/qcom,sc7280-camcc.yaml
 delete mode 100644 Documentation/devicetree/bindings/clock/qcom,sdm845-camcc.yaml
 delete mode 100644 Documentation/devicetree/bindings/clock/qcom,sm6350-camcc.yaml
 delete mode 100644 Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml

Comments

Krzysztof Kozlowski Sept. 23, 2023, 4:13 p.m. UTC | #1 
On 23/09/2023 17:00, Bryan O'Donoghue wrote:
> Move the various camcc yaml files into one. The Camera Clock Controller
> is pretty similar from SoC to SoC.
> 
> Mostly we have some SoCs which require fewer clocks than others. In some
> cases we have SoCs which have required-opps and required-power-domains.
> 
> It is likely we could and should extend the thin CAMCC descriptions such
> as sdm845 an sm6350 to the more robust descriptions such as sm8250 and
> sm8450.
> 
> As a result of listing sm8250 and sm8450 together required-opps and
> power-domains become required for sm8250, which is a NOP for the dtsi
> since both declarations already exist for sm8250.
> 
> sm8250 is also chosen as the example for the new combined camcc.yaml.
> 
> A minor tweak to fix Bjorn's email address in the Maintainer list is
> included.
> 
> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>

No, that's not the right approach. For GCC and CamCC and all other
Qualcomm clock controllers, we split into device schemas, not merge into
one. The one schema is just becoming unreviewable over time with
multiple if:then clauses.

Please use approach like we have for GCC, RPMh interconnects or remote
proc loaders - common file. What's more, here you probably don't even
need common file because it is already there - qcom,gcc.yaml

Best regards,
Krzysztof
Bryan O'Donoghue Sept. 24, 2023, 10:20 a.m. UTC | #2 
On 23/09/2023 17:13, Krzysztof Kozlowski wrote:
> On 23/09/2023 17:00, Bryan O'Donoghue wrote:
>> Move the various camcc yaml files into one. The Camera Clock Controller
>> is pretty similar from SoC to SoC.
>>
>> Mostly we have some SoCs which require fewer clocks than others. In some
>> cases we have SoCs which have required-opps and required-power-domains.
>>
>> It is likely we could and should extend the thin CAMCC descriptions such
>> as sdm845 an sm6350 to the more robust descriptions such as sm8250 and
>> sm8450.
>>
>> As a result of listing sm8250 and sm8450 together required-opps and
>> power-domains become required for sm8250, which is a NOP for the dtsi
>> since both declarations already exist for sm8250.
>>
>> sm8250 is also chosen as the example for the new combined camcc.yaml.
>>
>> A minor tweak to fix Bjorn's email address in the Maintainer list is
>> included.
>>
>> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
> 
> No, that's not the right approach. For GCC and CamCC and all other
> Qualcomm clock controllers, we split into device schemas, not merge into
> one. The one schema is just becoming unreviewable over time with
> multiple if:then clauses.
> 
> Please use approach like we have for GCC, RPMh interconnects or remote
> proc loaders - common file. What's more, here you probably don't even
> need common file because it is already there - qcom,gcc.yaml
> 
> Best regards,
> Krzysztof
> 

Ah OK, I see what you mean.

commit f8cc21d454c50157a528c900b60aa9588b4066b3
Author: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Date:   Tue Dec 27 15:40:56 2022 +0100

     media: dt-bindings: qcom,venus: split common properties

---
bod
Krzysztof Kozlowski Sept. 24, 2023, 11:45 a.m. UTC | #3 
On 24/09/2023 12:20, Bryan O'Donoghue wrote:
> On 23/09/2023 17:13, Krzysztof Kozlowski wrote:
>> On 23/09/2023 17:00, Bryan O'Donoghue wrote:
>>> Move the various camcc yaml files into one. The Camera Clock Controller
>>> is pretty similar from SoC to SoC.
>>>
>>> Mostly we have some SoCs which require fewer clocks than others. In some
>>> cases we have SoCs which have required-opps and required-power-domains.
>>>
>>> It is likely we could and should extend the thin CAMCC descriptions such
>>> as sdm845 an sm6350 to the more robust descriptions such as sm8250 and
>>> sm8450.
>>>
>>> As a result of listing sm8250 and sm8450 together required-opps and
>>> power-domains become required for sm8250, which is a NOP for the dtsi
>>> since both declarations already exist for sm8250.
>>>
>>> sm8250 is also chosen as the example for the new combined camcc.yaml.
>>>
>>> A minor tweak to fix Bjorn's email address in the Maintainer list is
>>> included.
>>>
>>> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
>>
>> No, that's not the right approach. For GCC and CamCC and all other
>> Qualcomm clock controllers, we split into device schemas, not merge into
>> one. The one schema is just becoming unreviewable over time with
>> multiple if:then clauses.
>>
>> Please use approach like we have for GCC, RPMh interconnects or remote
>> proc loaders - common file. What's more, here you probably don't even
>> need common file because it is already there - qcom,gcc.yaml
>>
>> Best regards,
>> Krzysztof
>>
> 
> Ah OK, I see what you mean.
> 
> commit f8cc21d454c50157a528c900b60aa9588b4066b3
> Author: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Date:   Tue Dec 27 15:40:56 2022 +0100
> 
>      media: dt-bindings: qcom,venus: split common properties

Yes, except that in case of camcc it might be enough to use existing
gcc.yaml

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/clock/qcom,camcc-sm8250.yaml b/Documentation/devicetree/bindings/clock/qcom,camcc-sm8250.yaml
deleted file mode 100644
index 426335a2841c..000000000000
--- a/Documentation/devicetree/bindings/clock/qcom,camcc-sm8250.yaml
+++ /dev/null
@@ -1,84 +0,0 @@ 
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/clock/qcom,camcc-sm8250.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Qualcomm Camera Clock & Reset Controller on SM8250
-
-maintainers:
-  - Jonathan Marek <jonathan@marek.ca>
-
-description: |
-  Qualcomm camera clock control module provides the clocks, resets and
-  power domains on SM8250.
-
-  See also:: include/dt-bindings/clock/qcom,camcc-sm8250.h
-
-properties:
-  compatible:
-    const: qcom,sm8250-camcc
-
-  clocks:
-    items:
-      - description: AHB
-      - description: Board XO source
-      - description: Board active XO source
-      - description: Sleep clock source
-
-  clock-names:
-    items:
-      - const: iface
-      - const: bi_tcxo
-      - const: bi_tcxo_ao
-      - const: sleep_clk
-
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  power-domains:
-    items:
-      - description: MMCX power domain
-
-  reg:
-    maxItems: 1
-
-  required-opps:
-    maxItems: 1
-    description:
-      OPP node describing required MMCX performance point.
-
-required:
-  - compatible
-  - reg
-  - clocks
-  - clock-names
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
-
-additionalProperties: false
-
-examples:
-  - |
-    #include <dt-bindings/clock/qcom,gcc-sm8250.h>
-    #include <dt-bindings/clock/qcom,rpmh.h>
-    clock-controller@ad00000 {
-      compatible = "qcom,sm8250-camcc";
-      reg = <0x0ad00000 0x10000>;
-      clocks = <&gcc GCC_CAMERA_AHB_CLK>,
-               <&rpmhcc RPMH_CXO_CLK>,
-               <&rpmhcc RPMH_CXO_CLK_A>,
-               <&sleep_clk>;
-      clock-names = "iface", "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
-      #clock-cells = <1>;
-      #reset-cells = <1>;
-      #power-domain-cells = <1>;
-    };
-...
diff --git a/Documentation/devicetree/bindings/clock/qcom,camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,camcc.yaml
new file mode 100644
index 000000000000..81807b8e0d24
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,camcc.yaml
@@ -0,0 +1,171 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,camcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Camera Clock & Reset Controller
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Jonathan Marek <jonathan@marek.ca>
+  - Konrad Dybcio <konrad.dybcio@linaro.org>
+  - Taniya Das <quic_tdas@quicinc.com>
+  - Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
+
+description: |
+  Qualcomm camera clock control module provides the clocks, resets and power
+  domains on Qualcomm SoCs.
+
+  See also:: include/dt-bindings/clock/qcom,camcc-sc7180.h
+  See also:: include/dt-bindings/clock/qcom,camcc-sc7280.h
+  See also:: include/dt-bindings/clock/qcom,camcc-sdm845.h
+  See also:: include/dt-bindings/clock/qcom,camcc-sm8250.h
+  See also:: include/dt-bindings/clock/qcom,sm6350-camcc.h
+  See also:: include/dt-bindings/clock/qcom,sm8450-camcc.h
+  See also:: include/dt-bindings/clock/qcom,sm8550-camcc.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc7180-camcc
+      - qcom,sc7280-camcc
+      - qcom,sdm845-camcc
+      - qcom,sm6350-camcc
+      - qcom,sm8250-camcc
+      - qcom,sm8450-camcc
+      - qcom,sm8550-camcc
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    minItems: 1
+    maxItems: 4
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  power-domains:
+    maxItems: 1
+    description:
+      A phandle and PM domain specifier for the MMCX power domain.
+
+  reg:
+    maxItems: 1
+
+  required-opps:
+    maxItems: 1
+    description:
+      OPP node describing required MMCX performance point.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sc7180-camcc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: Camera_ahb clock from GCC
+            - description: Camera XO clock from GCC
+        clock-names:
+          items:
+            - const: bi_tcxo
+            - const: iface
+            - const: xo
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sdm845-camcc
+            - qcom,sm6350-camcc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+        clock-names:
+          items:
+            - const: bi_tcxo
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sc7280-camcc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: Board XO active source
+            - description: Sleep clock source
+        clock-names:
+          items:
+            - const: bi_tcxo
+            - const: bi_tcxo_ao
+            - const: sleep_clk
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sm8250-camcc
+            - qcom,sm8450-camcc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: AHB
+            - description: Board XO source
+            - description: Board active XO source
+            - description: Sleep clock source
+        clock-names:
+          items:
+            - const: iface
+            - const: bi_tcxo
+            - const: bi_tcxo_ao
+            - const: sleep_clk
+      required:
+        - power-domains
+        - required-opps
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm8250.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+    clock-controller@ad00000 {
+      compatible = "qcom,sm8250-camcc";
+      reg = <0x0ad00000 0x10000>;
+      clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+               <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
+               <&sleep_clk>;
+      clock-names = "iface", "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+      power-domains = <&rpmhpd RPMHPD_MMCX>;
+      required-opps = <&rpmhpd_opp_low_svs>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-camcc.yaml
deleted file mode 100644
index 2dfc2a4f1918..000000000000
--- a/Documentation/devicetree/bindings/clock/qcom,sc7180-camcc.yaml
+++ /dev/null
@@ -1,72 +0,0 @@ 
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/clock/qcom,sc7180-camcc.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Qualcomm Camera Clock & Reset Controller on SC7180
-
-maintainers:
-  - Taniya Das <quic_tdas@quicinc.com>
-
-description: |
-  Qualcomm camera clock control module provides the clocks, resets and power
-  domains on SC7180.
-
-  See also:: include/dt-bindings/clock/qcom,camcc-sc7180.h
-
-properties:
-  compatible:
-    const: qcom,sc7180-camcc
-
-  clocks:
-    items:
-      - description: Board XO source
-      - description: Camera_ahb clock from GCC
-      - description: Camera XO clock from GCC
-
-  clock-names:
-    items:
-      - const: bi_tcxo
-      - const: iface
-      - const: xo
-
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
-required:
-  - compatible
-  - reg
-  - clocks
-  - clock-names
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
-
-additionalProperties: false
-
-examples:
-  - |
-    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
-    #include <dt-bindings/clock/qcom,rpmh.h>
-    clock-controller@ad00000 {
-      compatible = "qcom,sc7180-camcc";
-      reg = <0x0ad00000 0x10000>;
-      clocks = <&rpmhcc RPMH_CXO_CLK>,
-               <&gcc GCC_CAMERA_AHB_CLK>,
-               <&gcc GCC_CAMERA_XO_CLK>;
-      clock-names = "bi_tcxo", "iface", "xo";
-      #clock-cells = <1>;
-      #reset-cells = <1>;
-      #power-domain-cells = <1>;
-    };
-...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7280-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7280-camcc.yaml
deleted file mode 100644
index 01feef1cab0a..000000000000
--- a/Documentation/devicetree/bindings/clock/qcom,sc7280-camcc.yaml
+++ /dev/null
@@ -1,71 +0,0 @@ 
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/clock/qcom,sc7280-camcc.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Qualcomm Camera Clock & Reset Controller on SC7280
-
-maintainers:
-  - Taniya Das <quic_tdas@quicinc.com>
-
-description: |
-  Qualcomm camera clock control module provides the clocks, resets and
-  power domains on SC7280.
-
-  See also:: include/dt-bindings/clock/qcom,camcc-sc7280.h
-
-properties:
-  compatible:
-    const: qcom,sc7280-camcc
-
-  clocks:
-    items:
-      - description: Board XO source
-      - description: Board XO active source
-      - description: Sleep clock source
-
-  clock-names:
-    items:
-      - const: bi_tcxo
-      - const: bi_tcxo_ao
-      - const: sleep_clk
-
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
-required:
-  - compatible
-  - reg
-  - clocks
-  - clock-names
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
-
-additionalProperties: false
-
-examples:
-  - |
-    #include <dt-bindings/clock/qcom,rpmh.h>
-    clock-controller@ad00000 {
-      compatible = "qcom,sc7280-camcc";
-      reg = <0x0ad00000 0x10000>;
-      clocks = <&rpmhcc RPMH_CXO_CLK>,
-               <&rpmhcc RPMH_CXO_CLK_A>,
-               <&sleep_clk>;
-      clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
-      #clock-cells = <1>;
-      #reset-cells = <1>;
-      #power-domain-cells = <1>;
-    };
-...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sdm845-camcc.yaml
deleted file mode 100644
index 91d1f7918037..000000000000
--- a/Documentation/devicetree/bindings/clock/qcom,sdm845-camcc.yaml
+++ /dev/null
@@ -1,65 +0,0 @@ 
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/clock/qcom,sdm845-camcc.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Qualcomm Camera Clock & Reset Controller on SDM845
-
-maintainers:
-  - Bjorn Andersson <bjorn.andersson@linaro.org>
-
-description: |
-  Qualcomm camera clock control module provides the clocks, resets and power
-  domains on SDM845.
-
-  See also:: include/dt-bindings/clock/qcom,camcc-sm845.h
-
-properties:
-  compatible:
-    const: qcom,sdm845-camcc
-
-  clocks:
-    items:
-      - description: Board XO source
-
-  clock-names:
-    items:
-      - const: bi_tcxo
-
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
-required:
-  - compatible
-  - reg
-  - clocks
-  - clock-names
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
-
-additionalProperties: false
-
-examples:
-  - |
-    #include <dt-bindings/clock/qcom,rpmh.h>
-    clock-controller@ad00000 {
-      compatible = "qcom,sdm845-camcc";
-      reg = <0x0ad00000 0x10000>;
-      clocks = <&rpmhcc RPMH_CXO_CLK>;
-      clock-names = "bi_tcxo";
-      #clock-cells = <1>;
-      #reset-cells = <1>;
-      #power-domain-cells = <1>;
-    };
-...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm6350-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm6350-camcc.yaml
deleted file mode 100644
index fd6658cb793d..000000000000
--- a/Documentation/devicetree/bindings/clock/qcom,sm6350-camcc.yaml
+++ /dev/null
@@ -1,49 +0,0 @@ 
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/clock/qcom,sm6350-camcc.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Qualcomm Camera Clock & Reset Controller on SM6350
-
-maintainers:
-  - Konrad Dybcio <konrad.dybcio@linaro.org>
-
-description: |
-  Qualcomm camera clock control module provides the clocks, resets and  power
-  domains on SM6350.
-
-  See also:: include/dt-bindings/clock/qcom,sm6350-camcc.h
-
-properties:
-  compatible:
-    const: qcom,sm6350-camcc
-
-  clocks:
-    items:
-      - description: Board XO source
-
-  reg:
-    maxItems: 1
-
-required:
-  - compatible
-  - clocks
-
-allOf:
-  - $ref: qcom,gcc.yaml#
-
-unevaluatedProperties: false
-
-examples:
-  - |
-    #include <dt-bindings/clock/qcom,rpmh.h>
-    clock-controller@ad00000 {
-      compatible = "qcom,sm6350-camcc";
-      reg = <0x0ad00000 0x16000>;
-      clocks = <&rpmhcc RPMH_CXO_CLK>;
-      #clock-cells = <1>;
-      #reset-cells = <1>;
-      #power-domain-cells = <1>;
-    };
-...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml
deleted file mode 100644
index dc3c18e4ead7..000000000000
--- a/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml
+++ /dev/null
@@ -1,85 +0,0 @@ 
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/clock/qcom,sm8450-camcc.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Qualcomm Camera Clock & Reset Controller on SM8450
-
-maintainers:
-  - Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
-
-description: |
-  Qualcomm camera clock control module provides the clocks, resets and power
-  domains on SM8450.
-
-  See also::
-    include/dt-bindings/clock/qcom,sm8450-camcc.h
-    include/dt-bindings/clock/qcom,sm8550-camcc.h
-
-properties:
-  compatible:
-    enum:
-      - qcom,sm8450-camcc
-      - qcom,sm8550-camcc
-
-  clocks:
-    items:
-      - description: Camera AHB clock from GCC
-      - description: Board XO source
-      - description: Board active XO source
-      - description: Sleep clock source
-
-  power-domains:
-    maxItems: 1
-    description:
-      A phandle and PM domain specifier for the MMCX power domain.
-
-  required-opps:
-    maxItems: 1
-    description:
-      A phandle to an OPP node describing required MMCX performance point.
-
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
-required:
-  - compatible
-  - reg
-  - clocks
-  - power-domains
-  - required-opps
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
-
-additionalProperties: false
-
-examples:
-  - |
-    #include <dt-bindings/clock/qcom,gcc-sm8450.h>
-    #include <dt-bindings/clock/qcom,rpmh.h>
-    #include <dt-bindings/power/qcom,rpmhpd.h>
-    clock-controller@ade0000 {
-      compatible = "qcom,sm8450-camcc";
-      reg = <0xade0000 0x20000>;
-      clocks = <&gcc GCC_CAMERA_AHB_CLK>,
-               <&rpmhcc RPMH_CXO_CLK>,
-               <&rpmhcc RPMH_CXO_CLK_A>,
-               <&sleep_clk>;
-      power-domains = <&rpmhpd RPMHPD_MMCX>;
-      required-opps = <&rpmhpd_opp_low_svs>;
-      #clock-cells = <1>;
-      #reset-cells = <1>;
-      #power-domain-cells = <1>;
-    };
-...