diff mbox series

[V4,4/4] dt-bindings: ufs: qcom: Align clk binding property for Qualcomm UFS

Message ID 20230929131936.29421-5-quic_nitirawa@quicinc.com (mailing list archive)
State Not Applicable
Headers show
Series Add UFS host controller and Phy nodes for sc7280 | expand

Commit Message

Nitin Rawat Sept. 29, 2023, 1:19 p.m. UTC 
Align the binding property for clock such that "clocks" property
comes first followed by "clock-names" property.

Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 .../devicetree/bindings/ufs/qcom,ufs.yaml        | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

--
2.17.1

Comments

Konrad Dybcio Sept. 29, 2023, 1:26 p.m. UTC | #1 
On 9/29/23 15:19, Nitin Rawat wrote:
> Align the binding property for clock such that "clocks" property
> comes first followed by "clock-names" property.
> 
> Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
This is also not the tag I attributed during the review.

Konrad
Krzysztof Kozlowski Sept. 30, 2023, 2:45 p.m. UTC | #2 
On 29/09/2023 15:19, Nitin Rawat wrote:
> Align the binding property for clock such that "clocks" property
> comes first followed by "clock-names" property.

This is a friendly reminder during the review process.

It seems my previous comments were not fully addressed. Maybe my
feedback got lost between the quotes, maybe you just forgot to apply it.
Please go back to the previous discussion and either implement all
requested changes or keep discussing them.

Thank you.

Since you also ignored tags or added them wrong, let's be clear here:
NAK till you solve all the issues.

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml b/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml
index 802640efa956..d17bdc4e934f 100644
--- a/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml
+++ b/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml
@@ -295,14 +295,6 @@  examples:
                             <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_UFS_MEM_CFG>;
             interconnect-names = "ufs-ddr", "cpu-ufs";

-            clock-names = "core_clk",
-                          "bus_aggr_clk",
-                          "iface_clk",
-                          "core_clk_unipro",
-                          "ref_clk",
-                          "tx_lane0_sync_clk",
-                          "rx_lane0_sync_clk",
-                          "rx_lane1_sync_clk";
             clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
                      <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
                      <&gcc GCC_UFS_PHY_AHB_CLK>,
@@ -311,6 +303,14 @@  examples:
                      <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
                      <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
                      <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+            clock-names = "core_clk",
+                          "bus_aggr_clk",
+                          "iface_clk",
+                          "core_clk_unipro",
+                          "ref_clk",
+                          "tx_lane0_sync_clk",
+                          "rx_lane0_sync_clk",
+                          "rx_lane1_sync_clk";
             freq-table-hz = <75000000 300000000>,
                             <0 0>,
                             <0 0>,