| Message ID | 20231003055655.30994-3-quic_kbajaj@quicinc.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Initial support for the QCM6490 IDP | expand |
On 03/10/2023 06:56, Komal Bajaj wrote: > Add qcm6490 devicetree file for QCM6490 SoC and QCM6490 IDP > platform. QCM6490 is derived from SC7280 meant for various > form factor including IoT. > > Supported features are, as of now: > * Debug UART > * eMMC > * USB > > Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com> > --- > arch/arm64/boot/dts/qcom/Makefile | 1 + > arch/arm64/boot/dts/qcom/qcm6490-idp.dts | 335 +++++++++++++++++++++++ > arch/arm64/boot/dts/qcom/qcm6490.dtsi | 94 +++++++ > 3 files changed, 430 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/qcm6490-idp.dts > create mode 100644 arch/arm64/boot/dts/qcom/qcm6490.dtsi > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > index 73c3be0f8872..3a2d9dbaacce 100644 > --- a/arch/arm64/boot/dts/qcom/Makefile > +++ b/arch/arm64/boot/dts/qcom/Makefile > @@ -82,6 +82,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-maple.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-poplar.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8998-xiaomi-sagit.dtb > dtb-$(CONFIG_ARCH_QCOM) += qcm6490-fairphone-fp5.dtb > +dtb-$(CONFIG_ARCH_QCOM) += qcm6490-idp.dtb > dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb > dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb > dtb-$(CONFIG_ARCH_QCOM) += qdu1000-idp.dtb > diff --git a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts > new file mode 100644 > index 000000000000..ab9fa9197fe3 > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts > @@ -0,0 +1,335 @@ > +// SPDX-License-Identifier: BSD-3-Clause > +/* > + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. > + */ > + > +/dts-v1/; > + > +#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h> > +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> > +#include "qcm6490.dtsi" This include should go last > +#include "pm7325.dtsi" > +#include "pm8350c.dtsi" > +#include "pmk8350.dtsi" > + > +/ { > + model = "Qualcomm Technologies, Inc. QCM6490 IDP"; > + compatible = "qcom,qcm6490-idp", "qcom,qcm6490"; > + > + aliases { > + serial0 = &uart5; > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > +}; > + > +&apps_rsc { > + regulators-0 { > + compatible = "qcom,pm7325-rpmh-regulators"; > + qcom,pmic-id = "b"; > + > + vreg_s1b_1p8: smps1 { > + regulator-min-microvolt = <1856000>; > + regulator-max-microvolt = <2040000>; > + }; > + > + vreg_s7b_0p9: smps7 { > + regulator-min-microvolt = <535000>; > + regulator-max-microvolt = <1120000>; > + }; > + > + vreg_s8b_1p2: smps8 { > + regulator-min-microvolt = <1256000>; > + regulator-max-microvolt = <1500000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>; > + }; > + > + vreg_l1b_0p8: ldo1 { > + regulator-min-microvolt = <825000>; > + regulator-max-microvolt = <925000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l2b_3p0: ldo2 { > + regulator-min-microvolt = <2700000>; > + regulator-max-microvolt = <3544000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l6b_1p2: ldo6 { > + regulator-min-microvolt = <1140000>; > + regulator-max-microvolt = <1260000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l7b_2p9: ldo7 { > + regulator-min-microvolt = <2960000>; > + regulator-max-microvolt = <2960000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l8b_0p9: ldo8 { > + regulator-min-microvolt = <870000>; > + regulator-max-microvolt = <970000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l9b_1p2: ldo9 { > + regulator-min-microvolt = <1080000>; > + regulator-max-microvolt = <1304000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l11b_1p7: ldo11 { > + regulator-min-microvolt = <1504000>; > + regulator-max-microvolt = <2000000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l12b_0p8: ldo12 { > + regulator-min-microvolt = <751000>; > + regulator-max-microvolt = <824000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l13b_0p8: ldo13 { > + regulator-min-microvolt = <530000>; > + regulator-max-microvolt = <824000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l14b_1p2: ldo14 { > + regulator-min-microvolt = <1080000>; > + regulator-max-microvolt = <1304000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l15b_0p8: ldo15 { > + regulator-min-microvolt = <765000>; > + regulator-max-microvolt = <1020000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l16b_1p2: ldo16 { > + regulator-min-microvolt = <1100000>; > + regulator-max-microvolt = <1300000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l17b_1p8: ldo17 { > + regulator-min-microvolt = <1700000>; > + regulator-max-microvolt = <1900000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l18b_1p8: ldo18 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <2000000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l19b_1p8: ldo19 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > + > + regulators-1 { > + compatible = "qcom,pm8350c-rpmh-regulators"; > + qcom,pmic-id = "c"; > + > + vreg_s1c_2p2: smps1 { > + regulator-min-microvolt = <2190000>; > + regulator-max-microvolt = <2210000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_s9c_1p0: smps9 { > + regulator-min-microvolt = <1010000>; > + regulator-max-microvolt = <1170000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l1c_1p8: ldo1 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1980000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l2c_1p8: ldo2 { > + regulator-min-microvolt = <1620000>; > + regulator-max-microvolt = <1980000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l3c_3p0: ldo3 { > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <3540000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l4c_1p8: ldo4 { > + regulator-min-microvolt = <1620000>; > + regulator-max-microvolt = <3300000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l5c_1p8: ldo5 { > + regulator-min-microvolt = <1620000>; > + regulator-max-microvolt = <3300000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l6c_2p9: ldo6 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <2950000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l7c_3p0: ldo7 { > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3544000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l8c_1p8: ldo8 { > + regulator-min-microvolt = <1620000>; > + regulator-max-microvolt = <2000000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l9c_2p9: ldo9 { > + regulator-min-microvolt = <2960000>; > + regulator-max-microvolt = <2960000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l10c_0p8: ldo10 { > + regulator-min-microvolt = <720000>; > + regulator-max-microvolt = <1050000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l11c_2p8: ldo11 { > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <3544000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l12c_1p8: ldo12 { > + regulator-min-microvolt = <1650000>; > + regulator-max-microvolt = <2000000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l13c_3p0: ldo13 { > + regulator-min-microvolt = <2700000>; > + regulator-max-microvolt = <3544000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_bob: bob { > + regulator-min-microvolt = <3008000>; > + regulator-max-microvolt = <3960000>; > + }; > + }; > +}; > + > +&gpi_dma0 { > + status = "okay"; > +}; > + > +&gpi_dma1 { > + status = "okay"; > +}; > + > +&qupv3_id_0 { > + status = "okay"; > +}; > + > +&qupv3_id_1 { > + status = "okay"; > +}; > + > +&sdhc_1 { > + non-removable; > + no-sd; > + no-sdio; > + > + vmmc-supply = <&vreg_l7b_2p9>; > + vqmmc-supply = <&vreg_l19b_1p8>; > + > + status = "okay"; > +}; > + > +&uart5 { > + compatible = "qcom,geni-debug-uart"; > + status = "okay"; > +}; > + > +&usb_1 { > + status = "okay"; > +}; > + > +&usb_1_dwc3 { > + dr_mode = "peripheral"; > +}; > + > +&usb_1_hsphy { > + vdda-pll-supply = <&vreg_l10c_0p8>; > + vdda33-supply = <&vreg_l2b_3p0>; > + vdda18-supply = <&vreg_l1c_1p8>; > + qcom,hs-rise-fall-time-bp = <0>; > + qcom,squelch-detector-bp = <(-2090)>; > + qcom,hs-disconnect-bp = <1743>; > + qcom,hs-amplitude-bp = <1780>; > + qcom,hs-crossover-voltage-microvolt = <(-31000)>; > + qcom,hs-output-impedance-micro-ohms = <2600000>; > + > + status = "okay"; > +}; > + > +&usb_1_qmpphy { > + vdda-phy-supply = <&vreg_l6b_1p2>; > + vdda-pll-supply = <&vreg_l1b_0p8>; > + > + status = "okay"; > +}; > + > +/* PINCTRL - additions to nodes defined in sc7280.dtsi */ > + > +&pm8350c_pwm { > + status = "okay"; > +}; > + > +&qup_uart5_tx { > + drive-strength = <2>; > + bias-disable; > +}; > + > +&qup_uart5_rx { > + drive-strength = <2>; > + bias-pull-up; > +}; > + > +&sdc1_clk { > + bias-disable; > + drive-strength = <16>; > +}; > + > +&sdc1_cmd { > + bias-pull-up; > + drive-strength = <10>; > +}; > + > +&sdc1_data { > + bias-pull-up; > + drive-strength = <10>; > +}; > + > +&sdc1_rclk { > + bias-pull-down; > +}; These nodes are out-of-order too, you should sort these in alphanumerically. q before r before s etc. > diff --git a/arch/arm64/boot/dts/qcom/qcm6490.dtsi b/arch/arm64/boot/dts/qcom/qcm6490.dtsi > new file mode 100644 > index 000000000000..b93270cae9ae > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/qcm6490.dtsi > @@ -0,0 +1,94 @@ > +// SPDX-License-Identifier: BSD-3-Clause > +/* > + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. > + */ > + > +#include "sc7280.dtsi" > + > +/* > + * Delete unused sc7280 memory nodes and define the memory regions > + * required by qcm6490 > + */ > +/delete-node/ &rmtfs_mem; > +/delete-node/ &wlan_ce_mem; > + > +/{ > + reserved-memory { > + cdsp_secure_heap_mem: cdsp-secure-heap@81800000 { > + reg = <0x0 0x81800000 0x0 0x1e00000>; > + no-map; > + }; > + > + camera_mem: camera@84300000 { > + reg = <0x0 0x84300000 0x0 0x500000>; > + no-map; > + }; > + > + wpss_mem: wpss@0x84800000 { > + reg = <0x0 0x84800000 0x0 0x1900000>; > + no-map; > + }; > + > + adsp_mem: adsp@86100000 { > + reg = <0x0 0x86100000 0x0 0x2800000>; > + no-map; > + }; > + > + cdsp_mem: cdsp@88900000 { > + reg = <0x0 0x88900000 0x0 0x1e00000>; > + no-map; > + }; > + > + cvp_mem: cvp@8ac00000 { > + reg = <0x0 0x8ac00000 0x0 0x500000>; > + no-map; > + }; > + > + ipa_gsi_mem: ipa-gsi@8b110000 { > + reg = <0x0 0x8b110000 0x0 0xa000>; > + no-map; > + }; > + > + gpu_microcode_mem: gpu-microcode@8b11a000 { > + reg = <0x0 0x8b11a000 0x0 0x2000>; > + no-map; > + }; > + > + mpss_mem: mpss@8b800000 { > + reg = <0x0 0x8b800000 0x0 0xf600000>; > + no-map; > + }; > + > + tz_stat_mem: tz-stat@c0000000 { > + reg = <0x0 0xc0000000 0x0 0x100000>; > + no-map; > + }; > + > + tags_mem: tags@c0100000 { > + reg = <0x0 0xc0100000 0x0 0x1200000>; > + no-map; > + }; > + > + qtee_mem: qtee@c1300000 { > + reg = <0x0 0xc1300000 0x0 0x500000>; > + no-map; > + }; > + > + trusted_apps_mem: trusted_apps@c1800000 { > + reg = <0x0 0xc1800000 0x0 0x3900000>; > + no-map; > + }; > + }; > +}; > + > +&video_mem { > + reg = <0x0 0x8a700000 0x0 0x500000>; > +}; > + > +&wifi { > + memory-region = <&wlan_fw_mem>; > +}; > + > +&xbl_mem { > + reg = <0x0 0x80700000 0x0 0x100000>; > +}; > -- > 2.42.0 >
On 10/3/2023 2:33 PM, Bryan O'Donoghue wrote: > On 03/10/2023 06:56, Komal Bajaj wrote: >> Add qcm6490 devicetree file for QCM6490 SoC and QCM6490 IDP >> platform. QCM6490 is derived from SC7280 meant for various >> form factor including IoT. >> >> Supported features are, as of now: >> * Debug UART >> * eMMC >> * USB >> >> Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com> >> --- >> arch/arm64/boot/dts/qcom/Makefile | 1 + >> arch/arm64/boot/dts/qcom/qcm6490-idp.dts | 335 +++++++++++++++++++++++ >> arch/arm64/boot/dts/qcom/qcm6490.dtsi | 94 +++++++ >> 3 files changed, 430 insertions(+) >> create mode 100644 arch/arm64/boot/dts/qcom/qcm6490-idp.dts >> create mode 100644 arch/arm64/boot/dts/qcom/qcm6490.dtsi >> >> diff --git a/arch/arm64/boot/dts/qcom/Makefile >> b/arch/arm64/boot/dts/qcom/Makefile >> index 73c3be0f8872..3a2d9dbaacce 100644 >> --- a/arch/arm64/boot/dts/qcom/Makefile >> +++ b/arch/arm64/boot/dts/qcom/Makefile >> @@ -82,6 +82,7 @@ dtb-$(CONFIG_ARCH_QCOM) += >> msm8998-sony-xperia-yoshino-maple.dtb >> dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-poplar.dtb >> dtb-$(CONFIG_ARCH_QCOM) += msm8998-xiaomi-sagit.dtb >> dtb-$(CONFIG_ARCH_QCOM) += qcm6490-fairphone-fp5.dtb >> +dtb-$(CONFIG_ARCH_QCOM) += qcm6490-idp.dtb >> dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb >> dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb >> dtb-$(CONFIG_ARCH_QCOM) += qdu1000-idp.dtb >> diff --git a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts >> b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts >> new file mode 100644 >> index 000000000000..ab9fa9197fe3 >> --- /dev/null >> +++ b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts >> @@ -0,0 +1,335 @@ >> +// SPDX-License-Identifier: BSD-3-Clause >> +/* >> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights >> reserved. >> + */ >> + >> +/dts-v1/; >> + >> +#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h> >> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> >> +#include "qcm6490.dtsi" > This include should go last Got it. > >> +#include "pm7325.dtsi" >> +#include "pm8350c.dtsi" >> +#include "pmk8350.dtsi" >> + >> +/ { >> + model = "Qualcomm Technologies, Inc. QCM6490 IDP"; >> + compatible = "qcom,qcm6490-idp", "qcom,qcm6490"; >> + >> + aliases { >> + serial0 = &uart5; >> + }; >> + >> + chosen { >> + stdout-path = "serial0:115200n8"; >> + }; >> +}; >> + >> +&apps_rsc { >> + regulators-0 { >> + compatible = "qcom,pm7325-rpmh-regulators"; >> + qcom,pmic-id = "b"; >> + >> + vreg_s1b_1p8: smps1 { >> + regulator-min-microvolt = <1856000>; >> + regulator-max-microvolt = <2040000>; >> + }; >> + >> + vreg_s7b_0p9: smps7 { >> + regulator-min-microvolt = <535000>; >> + regulator-max-microvolt = <1120000>; >> + }; >> + >> + vreg_s8b_1p2: smps8 { >> + regulator-min-microvolt = <1256000>; >> + regulator-max-microvolt = <1500000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>; >> + }; >> + >> + vreg_l1b_0p8: ldo1 { >> + regulator-min-microvolt = <825000>; >> + regulator-max-microvolt = <925000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l2b_3p0: ldo2 { >> + regulator-min-microvolt = <2700000>; >> + regulator-max-microvolt = <3544000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l6b_1p2: ldo6 { >> + regulator-min-microvolt = <1140000>; >> + regulator-max-microvolt = <1260000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l7b_2p9: ldo7 { >> + regulator-min-microvolt = <2960000>; >> + regulator-max-microvolt = <2960000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l8b_0p9: ldo8 { >> + regulator-min-microvolt = <870000>; >> + regulator-max-microvolt = <970000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l9b_1p2: ldo9 { >> + regulator-min-microvolt = <1080000>; >> + regulator-max-microvolt = <1304000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l11b_1p7: ldo11 { >> + regulator-min-microvolt = <1504000>; >> + regulator-max-microvolt = <2000000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l12b_0p8: ldo12 { >> + regulator-min-microvolt = <751000>; >> + regulator-max-microvolt = <824000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l13b_0p8: ldo13 { >> + regulator-min-microvolt = <530000>; >> + regulator-max-microvolt = <824000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l14b_1p2: ldo14 { >> + regulator-min-microvolt = <1080000>; >> + regulator-max-microvolt = <1304000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l15b_0p8: ldo15 { >> + regulator-min-microvolt = <765000>; >> + regulator-max-microvolt = <1020000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l16b_1p2: ldo16 { >> + regulator-min-microvolt = <1100000>; >> + regulator-max-microvolt = <1300000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l17b_1p8: ldo17 { >> + regulator-min-microvolt = <1700000>; >> + regulator-max-microvolt = <1900000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l18b_1p8: ldo18 { >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <2000000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l19b_1p8: ldo19 { >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + }; >> + >> + regulators-1 { >> + compatible = "qcom,pm8350c-rpmh-regulators"; >> + qcom,pmic-id = "c"; >> + >> + vreg_s1c_2p2: smps1 { >> + regulator-min-microvolt = <2190000>; >> + regulator-max-microvolt = <2210000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_s9c_1p0: smps9 { >> + regulator-min-microvolt = <1010000>; >> + regulator-max-microvolt = <1170000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l1c_1p8: ldo1 { >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1980000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l2c_1p8: ldo2 { >> + regulator-min-microvolt = <1620000>; >> + regulator-max-microvolt = <1980000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l3c_3p0: ldo3 { >> + regulator-min-microvolt = <2800000>; >> + regulator-max-microvolt = <3540000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l4c_1p8: ldo4 { >> + regulator-min-microvolt = <1620000>; >> + regulator-max-microvolt = <3300000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l5c_1p8: ldo5 { >> + regulator-min-microvolt = <1620000>; >> + regulator-max-microvolt = <3300000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l6c_2p9: ldo6 { >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <2950000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l7c_3p0: ldo7 { >> + regulator-min-microvolt = <3000000>; >> + regulator-max-microvolt = <3544000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l8c_1p8: ldo8 { >> + regulator-min-microvolt = <1620000>; >> + regulator-max-microvolt = <2000000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l9c_2p9: ldo9 { >> + regulator-min-microvolt = <2960000>; >> + regulator-max-microvolt = <2960000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l10c_0p8: ldo10 { >> + regulator-min-microvolt = <720000>; >> + regulator-max-microvolt = <1050000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l11c_2p8: ldo11 { >> + regulator-min-microvolt = <2800000>; >> + regulator-max-microvolt = <3544000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l12c_1p8: ldo12 { >> + regulator-min-microvolt = <1650000>; >> + regulator-max-microvolt = <2000000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l13c_3p0: ldo13 { >> + regulator-min-microvolt = <2700000>; >> + regulator-max-microvolt = <3544000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_bob: bob { >> + regulator-min-microvolt = <3008000>; >> + regulator-max-microvolt = <3960000>; >> + }; >> + }; >> +}; >> + >> +&gpi_dma0 { >> + status = "okay"; >> +}; >> + >> +&gpi_dma1 { >> + status = "okay"; >> +}; >> + >> +&qupv3_id_0 { >> + status = "okay"; >> +}; >> + >> +&qupv3_id_1 { >> + status = "okay"; >> +}; >> + >> +&sdhc_1 { >> + non-removable; >> + no-sd; >> + no-sdio; >> + >> + vmmc-supply = <&vreg_l7b_2p9>; >> + vqmmc-supply = <&vreg_l19b_1p8>; >> + >> + status = "okay"; >> +}; >> + >> +&uart5 { >> + compatible = "qcom,geni-debug-uart"; >> + status = "okay"; >> +}; >> + >> +&usb_1 { >> + status = "okay"; >> +}; >> + >> +&usb_1_dwc3 { >> + dr_mode = "peripheral"; >> +}; >> + >> +&usb_1_hsphy { >> + vdda-pll-supply = <&vreg_l10c_0p8>; >> + vdda33-supply = <&vreg_l2b_3p0>; >> + vdda18-supply = <&vreg_l1c_1p8>; >> + qcom,hs-rise-fall-time-bp = <0>; >> + qcom,squelch-detector-bp = <(-2090)>; >> + qcom,hs-disconnect-bp = <1743>; >> + qcom,hs-amplitude-bp = <1780>; >> + qcom,hs-crossover-voltage-microvolt = <(-31000)>; >> + qcom,hs-output-impedance-micro-ohms = <2600000>; >> + >> + status = "okay"; >> +}; >> + >> +&usb_1_qmpphy { >> + vdda-phy-supply = <&vreg_l6b_1p2>; >> + vdda-pll-supply = <&vreg_l1b_0p8>; >> + >> + status = "okay"; >> +}; >> + >> +/* PINCTRL - additions to nodes defined in sc7280.dtsi */ >> + >> +&pm8350c_pwm { >> + status = "okay"; >> +}; >> + >> +&qup_uart5_tx { >> + drive-strength = <2>; >> + bias-disable; >> +}; >> + >> +&qup_uart5_rx { >> + drive-strength = <2>; >> + bias-pull-up; >> +}; >> + >> +&sdc1_clk { >> + bias-disable; >> + drive-strength = <16>; >> +}; >> + >> +&sdc1_cmd { >> + bias-pull-up; >> + drive-strength = <10>; >> +}; >> + >> +&sdc1_data { >> + bias-pull-up; >> + drive-strength = <10>; >> +}; >> + >> +&sdc1_rclk { >> + bias-pull-down; >> +}; > > These nodes are out-of-order too, you should sort these in > alphanumerically. q before r before s etc. Got it. Will sort these nodes. Thanks Komal > >> diff --git a/arch/arm64/boot/dts/qcom/qcm6490.dtsi >> b/arch/arm64/boot/dts/qcom/qcm6490.dtsi >> new file mode 100644 >> index 000000000000..b93270cae9ae >> --- /dev/null >> +++ b/arch/arm64/boot/dts/qcom/qcm6490.dtsi >> @@ -0,0 +1,94 @@ >> +// SPDX-License-Identifier: BSD-3-Clause >> +/* >> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights >> reserved. >> + */ >> + >> +#include "sc7280.dtsi" >> + >> +/* >> + * Delete unused sc7280 memory nodes and define the memory regions >> + * required by qcm6490 >> + */ >> +/delete-node/ &rmtfs_mem; >> +/delete-node/ &wlan_ce_mem; >> + >> +/{ >> + reserved-memory { >> + cdsp_secure_heap_mem: cdsp-secure-heap@81800000 { >> + reg = <0x0 0x81800000 0x0 0x1e00000>; >> + no-map; >> + }; >> + >> + camera_mem: camera@84300000 { >> + reg = <0x0 0x84300000 0x0 0x500000>; >> + no-map; >> + }; >> + >> + wpss_mem: wpss@0x84800000 { >> + reg = <0x0 0x84800000 0x0 0x1900000>; >> + no-map; >> + }; >> + >> + adsp_mem: adsp@86100000 { >> + reg = <0x0 0x86100000 0x0 0x2800000>; >> + no-map; >> + }; >> + >> + cdsp_mem: cdsp@88900000 { >> + reg = <0x0 0x88900000 0x0 0x1e00000>; >> + no-map; >> + }; >> + >> + cvp_mem: cvp@8ac00000 { >> + reg = <0x0 0x8ac00000 0x0 0x500000>; >> + no-map; >> + }; >> + >> + ipa_gsi_mem: ipa-gsi@8b110000 { >> + reg = <0x0 0x8b110000 0x0 0xa000>; >> + no-map; >> + }; >> + >> + gpu_microcode_mem: gpu-microcode@8b11a000 { >> + reg = <0x0 0x8b11a000 0x0 0x2000>; >> + no-map; >> + }; >> + >> + mpss_mem: mpss@8b800000 { >> + reg = <0x0 0x8b800000 0x0 0xf600000>; >> + no-map; >> + }; >> + >> + tz_stat_mem: tz-stat@c0000000 { >> + reg = <0x0 0xc0000000 0x0 0x100000>; >> + no-map; >> + }; >> + >> + tags_mem: tags@c0100000 { >> + reg = <0x0 0xc0100000 0x0 0x1200000>; >> + no-map; >> + }; >> + >> + qtee_mem: qtee@c1300000 { >> + reg = <0x0 0xc1300000 0x0 0x500000>; >> + no-map; >> + }; >> + >> + trusted_apps_mem: trusted_apps@c1800000 { >> + reg = <0x0 0xc1800000 0x0 0x3900000>; >> + no-map; >> + }; >> + }; >> +}; >> + >> +&video_mem { >> + reg = <0x0 0x8a700000 0x0 0x500000>; >> +}; >> + >> +&wifi { >> + memory-region = <&wlan_fw_mem>; >> +}; >> + >> +&xbl_mem { >> + reg = <0x0 0x80700000 0x0 0x100000>; >> +}; >> -- >> 2.42.0 >> >
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 73c3be0f8872..3a2d9dbaacce 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -82,6 +82,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-maple.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-poplar.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-xiaomi-sagit.dtb dtb-$(CONFIG_ARCH_QCOM) += qcm6490-fairphone-fp5.dtb +dtb-$(CONFIG_ARCH_QCOM) += qcm6490-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb dtb-$(CONFIG_ARCH_QCOM) += qdu1000-idp.dtb diff --git a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts new file mode 100644 index 000000000000..ab9fa9197fe3 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts @@ -0,0 +1,335 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "qcm6490.dtsi" +#include "pm7325.dtsi" +#include "pm8350c.dtsi" +#include "pmk8350.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. QCM6490 IDP"; + compatible = "qcom,qcm6490-idp", "qcom,qcm6490"; + + aliases { + serial0 = &uart5; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm7325-rpmh-regulators"; + qcom,pmic-id = "b"; + + vreg_s1b_1p8: smps1 { + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s7b_0p9: smps7 { + regulator-min-microvolt = <535000>; + regulator-max-microvolt = <1120000>; + }; + + vreg_s8b_1p2: smps8 { + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1500000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>; + }; + + vreg_l1b_0p8: ldo1 { + regulator-min-microvolt = <825000>; + regulator-max-microvolt = <925000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2b_3p0: ldo2 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6b_1p2: ldo6 { + regulator-min-microvolt = <1140000>; + regulator-max-microvolt = <1260000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7b_2p9: ldo7 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8b_0p9: ldo8 { + regulator-min-microvolt = <870000>; + regulator-max-microvolt = <970000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9b_1p2: ldo9 { + regulator-min-microvolt = <1080000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11b_1p7: ldo11 { + regulator-min-microvolt = <1504000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12b_0p8: ldo12 { + regulator-min-microvolt = <751000>; + regulator-max-microvolt = <824000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13b_0p8: ldo13 { + regulator-min-microvolt = <530000>; + regulator-max-microvolt = <824000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14b_1p2: ldo14 { + regulator-min-microvolt = <1080000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15b_0p8: ldo15 { + regulator-min-microvolt = <765000>; + regulator-max-microvolt = <1020000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16b_1p2: ldo16 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17b_1p8: ldo17 { + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l18b_1p8: ldo18 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l19b_1p8: ldo19 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8350c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vreg_s1c_2p2: smps1 { + regulator-min-microvolt = <2190000>; + regulator-max-microvolt = <2210000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s9c_1p0: smps9 { + regulator-min-microvolt = <1010000>; + regulator-max-microvolt = <1170000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1c_1p8: ldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2c_1p8: ldo2 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c_3p0: ldo3 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3540000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4c_1p8: ldo4 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5c_1p8: ldo5 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6c_2p9: ldo6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7c_3p0: ldo7 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8c_1p8: ldo8 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9c_2p9: ldo9 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10c_0p8: ldo10 { + regulator-min-microvolt = <720000>; + regulator-max-microvolt = <1050000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11c_2p8: ldo11 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12c_1p8: ldo12 { + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13c_3p0: ldo13 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob: bob { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + }; + }; +}; + +&gpi_dma0 { + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&sdhc_1 { + non-removable; + no-sd; + no-sdio; + + vmmc-supply = <&vreg_l7b_2p9>; + vqmmc-supply = <&vreg_l19b_1p8>; + + status = "okay"; +}; + +&uart5 { + compatible = "qcom,geni-debug-uart"; + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + vdda-pll-supply = <&vreg_l10c_0p8>; + vdda33-supply = <&vreg_l2b_3p0>; + vdda18-supply = <&vreg_l1c_1p8>; + qcom,hs-rise-fall-time-bp = <0>; + qcom,squelch-detector-bp = <(-2090)>; + qcom,hs-disconnect-bp = <1743>; + qcom,hs-amplitude-bp = <1780>; + qcom,hs-crossover-voltage-microvolt = <(-31000)>; + qcom,hs-output-impedance-micro-ohms = <2600000>; + + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&vreg_l6b_1p2>; + vdda-pll-supply = <&vreg_l1b_0p8>; + + status = "okay"; +}; + +/* PINCTRL - additions to nodes defined in sc7280.dtsi */ + +&pm8350c_pwm { + status = "okay"; +}; + +&qup_uart5_tx { + drive-strength = <2>; + bias-disable; +}; + +&qup_uart5_rx { + drive-strength = <2>; + bias-pull-up; +}; + +&sdc1_clk { + bias-disable; + drive-strength = <16>; +}; + +&sdc1_cmd { + bias-pull-up; + drive-strength = <10>; +}; + +&sdc1_data { + bias-pull-up; + drive-strength = <10>; +}; + +&sdc1_rclk { + bias-pull-down; +}; diff --git a/arch/arm64/boot/dts/qcom/qcm6490.dtsi b/arch/arm64/boot/dts/qcom/qcm6490.dtsi new file mode 100644 index 000000000000..b93270cae9ae --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qcm6490.dtsi @@ -0,0 +1,94 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#include "sc7280.dtsi" + +/* + * Delete unused sc7280 memory nodes and define the memory regions + * required by qcm6490 + */ +/delete-node/ &rmtfs_mem; +/delete-node/ &wlan_ce_mem; + +/{ + reserved-memory { + cdsp_secure_heap_mem: cdsp-secure-heap@81800000 { + reg = <0x0 0x81800000 0x0 0x1e00000>; + no-map; + }; + + camera_mem: camera@84300000 { + reg = <0x0 0x84300000 0x0 0x500000>; + no-map; + }; + + wpss_mem: wpss@0x84800000 { + reg = <0x0 0x84800000 0x0 0x1900000>; + no-map; + }; + + adsp_mem: adsp@86100000 { + reg = <0x0 0x86100000 0x0 0x2800000>; + no-map; + }; + + cdsp_mem: cdsp@88900000 { + reg = <0x0 0x88900000 0x0 0x1e00000>; + no-map; + }; + + cvp_mem: cvp@8ac00000 { + reg = <0x0 0x8ac00000 0x0 0x500000>; + no-map; + }; + + ipa_gsi_mem: ipa-gsi@8b110000 { + reg = <0x0 0x8b110000 0x0 0xa000>; + no-map; + }; + + gpu_microcode_mem: gpu-microcode@8b11a000 { + reg = <0x0 0x8b11a000 0x0 0x2000>; + no-map; + }; + + mpss_mem: mpss@8b800000 { + reg = <0x0 0x8b800000 0x0 0xf600000>; + no-map; + }; + + tz_stat_mem: tz-stat@c0000000 { + reg = <0x0 0xc0000000 0x0 0x100000>; + no-map; + }; + + tags_mem: tags@c0100000 { + reg = <0x0 0xc0100000 0x0 0x1200000>; + no-map; + }; + + qtee_mem: qtee@c1300000 { + reg = <0x0 0xc1300000 0x0 0x500000>; + no-map; + }; + + trusted_apps_mem: trusted_apps@c1800000 { + reg = <0x0 0xc1800000 0x0 0x3900000>; + no-map; + }; + }; +}; + +&video_mem { + reg = <0x0 0x8a700000 0x0 0x500000>; +}; + +&wifi { + memory-region = <&wlan_fw_mem>; +}; + +&xbl_mem { + reg = <0x0 0x80700000 0x0 0x100000>; +};
Add qcm6490 devicetree file for QCM6490 SoC and QCM6490 IDP platform. QCM6490 is derived from SC7280 meant for various form factor including IoT. Supported features are, as of now: * Debug UART * eMMC * USB Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com> --- arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/qcm6490-idp.dts | 335 +++++++++++++++++++++++ arch/arm64/boot/dts/qcom/qcm6490.dtsi | 94 +++++++ 3 files changed, 430 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/qcm6490-idp.dts create mode 100644 arch/arm64/boot/dts/qcom/qcm6490.dtsi -- 2.42.0