| Message ID | 20231013-fsa4480-swap-v1-1-b877f62046cc@fairphone.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Handle reversed SBU orientation for FSA4480 | expand |
On Fri, Oct 13, 2023 at 01:38:05PM +0200, Luca Weiss wrote: > Allow specifying data-lanes to reverse the SBU muxing orientation where > necessary by the hardware design. What situation in the hardware design makes this necessary. Please describe the problem. > > Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> > --- > .../devicetree/bindings/usb/fcs,fsa4480.yaml | 29 +++++++++++++++++++++- > 1 file changed, 28 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml b/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml > index f6e7a5c1ff0b..86f6d633c2fb 100644 > --- a/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml > +++ b/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml > @@ -32,10 +32,37 @@ properties: > type: boolean > > port: > - $ref: /schemas/graph.yaml#/properties/port > + $ref: /schemas/graph.yaml#/$defs/port-base > description: > A port node to link the FSA4480 to a TypeC controller for the purpose of > handling altmode muxing and orientation switching. > + unevaluatedProperties: false > + > + properties: > + endpoint: > + $ref: /schemas/graph.yaml#/$defs/endpoint-base > + unevaluatedProperties: false > + > + properties: > + data-lanes: > + $ref: /schemas/types.yaml#/definitions/uint32-array > + description: > + Specifies how the AUX+/- lines are connected to SBU1/2. Doesn't this depend on the connector orientation? Or it is both that and the lines can be swapped on the PCB? Seems like an abuse of data-lanes which already has a definition which is not about swapping + and - differential lanes. Rob
On 16/10/2023 16:22, Rob Herring wrote: > On Fri, Oct 13, 2023 at 01:38:05PM +0200, Luca Weiss wrote: >> Allow specifying data-lanes to reverse the SBU muxing orientation where >> necessary by the hardware design. > > What situation in the hardware design makes this necessary. Please > describe the problem. > >> >> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> >> --- >> .../devicetree/bindings/usb/fcs,fsa4480.yaml | 29 +++++++++++++++++++++- >> 1 file changed, 28 insertions(+), 1 deletion(-) >> >> diff --git a/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml b/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml >> index f6e7a5c1ff0b..86f6d633c2fb 100644 >> --- a/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml >> +++ b/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml >> @@ -32,10 +32,37 @@ properties: >> type: boolean >> >> port: >> - $ref: /schemas/graph.yaml#/properties/port >> + $ref: /schemas/graph.yaml#/$defs/port-base >> description: >> A port node to link the FSA4480 to a TypeC controller for the purpose of >> handling altmode muxing and orientation switching. >> + unevaluatedProperties: false >> + >> + properties: >> + endpoint: >> + $ref: /schemas/graph.yaml#/$defs/endpoint-base >> + unevaluatedProperties: false >> + >> + properties: >> + data-lanes: >> + $ref: /schemas/types.yaml#/definitions/uint32-array >> + description: >> + Specifies how the AUX+/- lines are connected to SBU1/2. > > Doesn't this depend on the connector orientation? Or it is both that and > the lines can be swapped on the PCB? > > Seems like an abuse of data-lanes which already has a definition which > is not about swapping + and - differential lanes. The FSA acts as a mux between DP AUX, Audio lanes on one side and the USB-C SBU lanes on the other side. _______ ______ | | | |-- HP --| | |-- MIC --| |or SoC | | MUX |-- SBU1 ---> To the USB-C Codec |-- AUX+ --| |-- SBU2 ---> connected |-- AUX- --| | ______| |____ | The SBU1 & SBU2 are connected to the USB-C connector, and the actual orientation to the connected devices/cable/whatever is determined by the TPCM and the MUX in the FSA4480 with be dynamically changed according to the CC1/CC2 detection and PD alt mode. But on the other side the orientation of the AUX+/AUX- connected to the SoC is not tied to the USB-C orientation but how it's routed on the PCB. This describes how the AUX+/AUX- are physically routed to the FSA4480 chip. Neil > > Rob
On Mon, Oct 16, 2023 at 04:32:55PM +0200, Neil Armstrong wrote: > On 16/10/2023 16:22, Rob Herring wrote: > > On Fri, Oct 13, 2023 at 01:38:05PM +0200, Luca Weiss wrote: > > > Allow specifying data-lanes to reverse the SBU muxing orientation where > > > necessary by the hardware design. > > > > What situation in the hardware design makes this necessary. Please > > describe the problem. > > > > > > > > Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> > > > --- > > > .../devicetree/bindings/usb/fcs,fsa4480.yaml | 29 +++++++++++++++++++++- > > > 1 file changed, 28 insertions(+), 1 deletion(-) > > > > > > diff --git a/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml b/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml > > > index f6e7a5c1ff0b..86f6d633c2fb 100644 > > > --- a/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml > > > +++ b/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml > > > @@ -32,10 +32,37 @@ properties: > > > type: boolean > > > port: > > > - $ref: /schemas/graph.yaml#/properties/port > > > + $ref: /schemas/graph.yaml#/$defs/port-base > > > description: > > > A port node to link the FSA4480 to a TypeC controller for the purpose of > > > handling altmode muxing and orientation switching. > > > + unevaluatedProperties: false > > > + > > > + properties: > > > + endpoint: > > > + $ref: /schemas/graph.yaml#/$defs/endpoint-base > > > + unevaluatedProperties: false > > > + > > > + properties: > > > + data-lanes: > > > + $ref: /schemas/types.yaml#/definitions/uint32-array > > > + description: > > > + Specifies how the AUX+/- lines are connected to SBU1/2. > > > > Doesn't this depend on the connector orientation? Or it is both that and > > the lines can be swapped on the PCB? > > > > Seems like an abuse of data-lanes which already has a definition which > > is not about swapping + and - differential lanes. > > The FSA acts as a mux between DP AUX, Audio lanes on one side and > the USB-C SBU lanes on the other side. > _______ ______ > | | | > |-- HP --| | > |-- MIC --| |or > SoC | | MUX |-- SBU1 ---> To the USB-C > Codec |-- AUX+ --| |-- SBU2 ---> connected > |-- AUX- --| | > ______| |____ | > > The SBU1 & SBU2 are connected to the USB-C connector, and the actual orientation > to the connected devices/cable/whatever is determined by the TPCM and the MUX in > the FSA4480 with be dynamically changed according to the CC1/CC2 detection and PD alt mode. > > But on the other side the orientation of the AUX+/AUX- connected to the SoC > is not tied to the USB-C orientation but how it's routed on the PCB. > > This describes how the AUX+/AUX- are physically routed to the FSA4480 chip. I'd hate for this ASCII art to go to waste. Please add this detail to the commit message. Rob
diff --git a/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml b/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml index f6e7a5c1ff0b..86f6d633c2fb 100644 --- a/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml +++ b/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml @@ -32,10 +32,37 @@ properties: type: boolean port: - $ref: /schemas/graph.yaml#/properties/port + $ref: /schemas/graph.yaml#/$defs/port-base description: A port node to link the FSA4480 to a TypeC controller for the purpose of handling altmode muxing and orientation switching. + unevaluatedProperties: false + + properties: + endpoint: + $ref: /schemas/graph.yaml#/$defs/endpoint-base + unevaluatedProperties: false + + properties: + data-lanes: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + Specifies how the AUX+/- lines are connected to SBU1/2. + oneOf: + - items: + - const: 0 + - const: 1 + description: | + Default AUX/SBU layout + - AUX+ connected to SBU2 + - AUX- connected to SBU1 + - items: + - const: 1 + - const: 0 + description: | + Swapped AUX/SBU layout + - AUX+ connected to SBU1 + - AUX- connected to SBU2 required: - compatible
Allow specifying data-lanes to reverse the SBU muxing orientation where necessary by the hardware design. Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> --- .../devicetree/bindings/usb/fcs,fsa4480.yaml | 29 +++++++++++++++++++++- 1 file changed, 28 insertions(+), 1 deletion(-)