| Message ID | 20231013172033.3549476-1-robimarko@gmail.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | [v6] cpufreq: qcom-nvmem: add support for IPQ8074 | expand |
On Fri, 13 Oct 2023 at 19:20, Robert Marko <robimarko@gmail.com> wrote: > > IPQ8074 comes in 3 families: > * IPQ8070A/IPQ8071A (Acorn) up to 1.4GHz > * IPQ8172/IPQ8173/IPQ8174 (Oak) up to 1.4GHz > * IPQ8072A/IPQ8074A/IPQ8076A/IPQ8078A (Hawkeye) up to 2.2GHz > > So, in order to be able to share one OPP table lets add support for IPQ8074 > family based of SMEM SoC ID-s as speedbin fuse is always 0 on IPQ8074. > > IPQ8074 compatible is blacklisted from DT platdev as the cpufreq device > will get created by NVMEM CPUFreq driver. > > Signed-off-by: Robert Marko <robimarko@gmail.com> > Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> > --- > Changes in v6: > * Split IPQ8074 from the IPQ8064 as IPQ8064 has additional dependencies. I discussed this with Christian and we decided to split out IPQ8074 as it is much simpler than IPQ8064 and has no additional dependencies so it makes sense split it out. Regards, Robert > > Changes in v4: > * Add support for IPQ8174 (Oak) family > > Changes in v3: > * Use enum for SoC versions > > Changes in v2: > * Print an error if SMEM ID is not part of the IPQ8074 family > and restrict the speed to Acorn variant (1.4GHz) > > drivers/cpufreq/cpufreq-dt-platdev.c | 1 + > drivers/cpufreq/qcom-cpufreq-nvmem.c | 48 ++++++++++++++++++++++++++++ > 2 files changed, 49 insertions(+) > > diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c > index 0b3776f558db..675da7f36846 100644 > --- a/drivers/cpufreq/cpufreq-dt-platdev.c > +++ b/drivers/cpufreq/cpufreq-dt-platdev.c > @@ -181,6 +181,7 @@ static const struct of_device_id blocklist[] __initconst = { > { .compatible = "ti,am62p5", }, > > { .compatible = "qcom,ipq8064", }, > + { .compatible = "qcom,ipq8074", }, > { .compatible = "qcom,apq8064", }, > { .compatible = "qcom,msm8974", }, > { .compatible = "qcom,msm8960", }, > diff --git a/drivers/cpufreq/qcom-cpufreq-nvmem.c b/drivers/cpufreq/qcom-cpufreq-nvmem.c > index 84d7033e5efe..3fa12648ceb6 100644 > --- a/drivers/cpufreq/qcom-cpufreq-nvmem.c > +++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c > @@ -30,6 +30,11 @@ > > #include <dt-bindings/arm/qcom,ids.h> > > +enum ipq8074_versions { > + IPQ8074_HAWKEYE_VERSION = 0, > + IPQ8074_ACORN_VERSION, > +}; > + > struct qcom_cpufreq_drv; > > struct qcom_cpufreq_match_data { > @@ -203,6 +208,44 @@ static int qcom_cpufreq_krait_name_version(struct device *cpu_dev, > return ret; > } > > +static int qcom_cpufreq_ipq8074_name_version(struct device *cpu_dev, > + struct nvmem_cell *speedbin_nvmem, > + char **pvs_name, > + struct qcom_cpufreq_drv *drv) > +{ > + u32 msm_id; > + int ret; > + *pvs_name = NULL; > + > + ret = qcom_smem_get_soc_id(&msm_id); > + if (ret) > + return ret; > + > + switch (msm_id) { > + case QCOM_ID_IPQ8070A: > + case QCOM_ID_IPQ8071A: > + case QCOM_ID_IPQ8172: > + case QCOM_ID_IPQ8173: > + case QCOM_ID_IPQ8174: > + drv->versions = BIT(IPQ8074_ACORN_VERSION); > + break; > + case QCOM_ID_IPQ8072A: > + case QCOM_ID_IPQ8074A: > + case QCOM_ID_IPQ8076A: > + case QCOM_ID_IPQ8078A: > + drv->versions = BIT(IPQ8074_HAWKEYE_VERSION); > + break; > + default: > + dev_err(cpu_dev, > + "SoC ID %u is not part of IPQ8074 family, limiting to 1.4GHz!\n", > + msm_id); > + drv->versions = BIT(IPQ8074_ACORN_VERSION); > + break; > + } > + > + return 0; > +} > + > static const struct qcom_cpufreq_match_data match_data_kryo = { > .get_version = qcom_cpufreq_kryo_name_version, > }; > @@ -217,6 +260,10 @@ static const struct qcom_cpufreq_match_data match_data_qcs404 = { > .genpd_names = qcs404_genpd_names, > }; > > +static const struct qcom_cpufreq_match_data match_data_ipq8074 = { > + .get_version = qcom_cpufreq_ipq8074_name_version, > +}; > + > static int qcom_cpufreq_probe(struct platform_device *pdev) > { > struct qcom_cpufreq_drv *drv; > @@ -360,6 +407,7 @@ static const struct of_device_id qcom_cpufreq_match_list[] __initconst = { > { .compatible = "qcom,msm8996", .data = &match_data_kryo }, > { .compatible = "qcom,qcs404", .data = &match_data_qcs404 }, > { .compatible = "qcom,ipq8064", .data = &match_data_krait }, > + { .compatible = "qcom,ipq8074", .data = &match_data_ipq8074 }, > { .compatible = "qcom,apq8064", .data = &match_data_krait }, > { .compatible = "qcom,msm8974", .data = &match_data_krait }, > { .compatible = "qcom,msm8960", .data = &match_data_krait }, > -- > 2.41.0 >
On 13-10-23, 19:20, Robert Marko wrote: > IPQ8074 comes in 3 families: > * IPQ8070A/IPQ8071A (Acorn) up to 1.4GHz > * IPQ8172/IPQ8173/IPQ8174 (Oak) up to 1.4GHz > * IPQ8072A/IPQ8074A/IPQ8076A/IPQ8078A (Hawkeye) up to 2.2GHz > > So, in order to be able to share one OPP table lets add support for IPQ8074 > family based of SMEM SoC ID-s as speedbin fuse is always 0 on IPQ8074. > > IPQ8074 compatible is blacklisted from DT platdev as the cpufreq device > will get created by NVMEM CPUFreq driver. > > Signed-off-by: Robert Marko <robimarko@gmail.com> > Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> > --- > Changes in v6: > * Split IPQ8074 from the IPQ8064 as IPQ8064 has additional dependencies. Applied. Thanks.
On 16-10-23, 09:02, Viresh Kumar wrote: > On 13-10-23, 19:20, Robert Marko wrote: > > IPQ8074 comes in 3 families: > > * IPQ8070A/IPQ8071A (Acorn) up to 1.4GHz > > * IPQ8172/IPQ8173/IPQ8174 (Oak) up to 1.4GHz > > * IPQ8072A/IPQ8074A/IPQ8076A/IPQ8078A (Hawkeye) up to 2.2GHz > > > > So, in order to be able to share one OPP table lets add support for IPQ8074 > > family based of SMEM SoC ID-s as speedbin fuse is always 0 on IPQ8074. > > > > IPQ8074 compatible is blacklisted from DT platdev as the cpufreq device > > will get created by NVMEM CPUFreq driver. > > > > Signed-off-by: Robert Marko <robimarko@gmail.com> > > Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> > > --- > > Changes in v6: > > * Split IPQ8074 from the IPQ8064 as IPQ8064 has additional dependencies. > > Applied. Thanks. And it failed to build, please fix it. Dropped from my tree now.
On Mon, 16 Oct 2023 at 10:22, Viresh Kumar <viresh.kumar@linaro.org> wrote: > > On 16-10-23, 09:02, Viresh Kumar wrote: > > On 13-10-23, 19:20, Robert Marko wrote: > > > IPQ8074 comes in 3 families: > > > * IPQ8070A/IPQ8071A (Acorn) up to 1.4GHz > > > * IPQ8172/IPQ8173/IPQ8174 (Oak) up to 1.4GHz > > > * IPQ8072A/IPQ8074A/IPQ8076A/IPQ8078A (Hawkeye) up to 2.2GHz > > > > > > So, in order to be able to share one OPP table lets add support for IPQ8074 > > > family based of SMEM SoC ID-s as speedbin fuse is always 0 on IPQ8074. > > > > > > IPQ8074 compatible is blacklisted from DT platdev as the cpufreq device > > > will get created by NVMEM CPUFreq driver. > > > > > > Signed-off-by: Robert Marko <robimarko@gmail.com> > > > Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> > > > --- > > > Changes in v6: > > > * Split IPQ8074 from the IPQ8064 as IPQ8064 has additional dependencies. > > > > Applied. Thanks. > > And it failed to build, please fix it. Dropped from my tree now. I am looking at the error and it should not happen as the ID-s have been in linux-next for a month now: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/include/dt-bindings/arm/qcom,ids.h?h=next-20231016&id=b8c889bef9797a58b8b5aad23875cc4d04b3efd3 They are also part of Bjorns 6.7 driver PR: https://lore.kernel.org/all/20231015204014.855672-1-andersson@kernel.org/T/ Regards, Robert > > -- > viresh
On Mon, 16 Oct 2023 at 11:29, Robert Marko <robimarko@gmail.com> wrote: > > On Mon, 16 Oct 2023 at 10:22, Viresh Kumar <viresh.kumar@linaro.org> wrote: > > > > On 16-10-23, 09:02, Viresh Kumar wrote: > > > On 13-10-23, 19:20, Robert Marko wrote: > > > > IPQ8074 comes in 3 families: > > > > * IPQ8070A/IPQ8071A (Acorn) up to 1.4GHz > > > > * IPQ8172/IPQ8173/IPQ8174 (Oak) up to 1.4GHz > > > > * IPQ8072A/IPQ8074A/IPQ8076A/IPQ8078A (Hawkeye) up to 2.2GHz > > > > > > > > So, in order to be able to share one OPP table lets add support for IPQ8074 > > > > family based of SMEM SoC ID-s as speedbin fuse is always 0 on IPQ8074. > > > > > > > > IPQ8074 compatible is blacklisted from DT platdev as the cpufreq device > > > > will get created by NVMEM CPUFreq driver. > > > > > > > > Signed-off-by: Robert Marko <robimarko@gmail.com> > > > > Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> > > > > --- > > > > Changes in v6: > > > > * Split IPQ8074 from the IPQ8064 as IPQ8064 has additional dependencies. > > > > > > Applied. Thanks. > > > > And it failed to build, please fix it. Dropped from my tree now. > > I am looking at the error and it should not happen as the ID-s have > been in linux-next for a month now: > https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/include/dt-bindings/arm/qcom,ids.h?h=next-20231016&id=b8c889bef9797a58b8b5aad23875cc4d04b3efd3 > > They are also part of Bjorns 6.7 driver PR: > https://lore.kernel.org/all/20231015204014.855672-1-andersson@kernel.org/T/ But Bjorn's tree isn't a part of the cpufreq tree. In such cases it is typical to ask first maintainer to create an immutable branch / tag, which can later be also merged into another tree without going into troubles of merging the whole tree of the irrelevant subsystem.
On Mon, 16 Oct 2023 at 10:36, Dmitry Baryshkov <dmitry.baryshkov@linaro.org> wrote: > > On Mon, 16 Oct 2023 at 11:29, Robert Marko <robimarko@gmail.com> wrote: > > > > On Mon, 16 Oct 2023 at 10:22, Viresh Kumar <viresh.kumar@linaro.org> wrote: > > > > > > On 16-10-23, 09:02, Viresh Kumar wrote: > > > > On 13-10-23, 19:20, Robert Marko wrote: > > > > > IPQ8074 comes in 3 families: > > > > > * IPQ8070A/IPQ8071A (Acorn) up to 1.4GHz > > > > > * IPQ8172/IPQ8173/IPQ8174 (Oak) up to 1.4GHz > > > > > * IPQ8072A/IPQ8074A/IPQ8076A/IPQ8078A (Hawkeye) up to 2.2GHz > > > > > > > > > > So, in order to be able to share one OPP table lets add support for IPQ8074 > > > > > family based of SMEM SoC ID-s as speedbin fuse is always 0 on IPQ8074. > > > > > > > > > > IPQ8074 compatible is blacklisted from DT platdev as the cpufreq device > > > > > will get created by NVMEM CPUFreq driver. > > > > > > > > > > Signed-off-by: Robert Marko <robimarko@gmail.com> > > > > > Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> > > > > > --- > > > > > Changes in v6: > > > > > * Split IPQ8074 from the IPQ8064 as IPQ8064 has additional dependencies. > > > > > > > > Applied. Thanks. > > > > > > And it failed to build, please fix it. Dropped from my tree now. > > > > I am looking at the error and it should not happen as the ID-s have > > been in linux-next for a month now: > > https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/include/dt-bindings/arm/qcom,ids.h?h=next-20231016&id=b8c889bef9797a58b8b5aad23875cc4d04b3efd3 > > > > They are also part of Bjorns 6.7 driver PR: > > https://lore.kernel.org/all/20231015204014.855672-1-andersson@kernel.org/T/ > > But Bjorn's tree isn't a part of the cpufreq tree. In such cases it is > typical to ask first maintainer to create an immutable branch / tag, > which can later be also merged into another tree without going into > troubles of merging the whole tree of the irrelevant subsystem. Ok, I understand now, the thing is that the ID-s were added for socinfo initially but recently I finally had somebody with access to the Oak HW so I added them to cpufreq as well. What can I do to help this get resolved? Regards, Robert > > > -- > With best wishes > Dmitry
On 16-10-23, 10:43, Robert Marko wrote: > Ok, I understand now, the thing is that the ID-s were added for > socinfo initially but recently > I finally had somebody with access to the Oak HW so I added them to > cpufreq as well. > > What can I do to help this get resolved? Rebased over Bjorn's commit (which he already sent in his Arm SoC pull request) and applied your patch again.
On Mon, 16 Oct 2023 at 12:31, Viresh Kumar <viresh.kumar@linaro.org> wrote: > > On 16-10-23, 10:43, Robert Marko wrote: > > Ok, I understand now, the thing is that the ID-s were added for > > socinfo initially but recently > > I finally had somebody with access to the Oak HW so I added them to > > cpufreq as well. > > > > What can I do to help this get resolved? > > Rebased over Bjorn's commit (which he already sent in his Arm SoC pull > request) and applied your patch again. Thank you for your understanding, I will watch out for possible cases like these in the future. Regards, Robert > > -- > viresh
diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c index 0b3776f558db..675da7f36846 100644 --- a/drivers/cpufreq/cpufreq-dt-platdev.c +++ b/drivers/cpufreq/cpufreq-dt-platdev.c @@ -181,6 +181,7 @@ static const struct of_device_id blocklist[] __initconst = { { .compatible = "ti,am62p5", }, { .compatible = "qcom,ipq8064", }, + { .compatible = "qcom,ipq8074", }, { .compatible = "qcom,apq8064", }, { .compatible = "qcom,msm8974", }, { .compatible = "qcom,msm8960", }, diff --git a/drivers/cpufreq/qcom-cpufreq-nvmem.c b/drivers/cpufreq/qcom-cpufreq-nvmem.c index 84d7033e5efe..3fa12648ceb6 100644 --- a/drivers/cpufreq/qcom-cpufreq-nvmem.c +++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c @@ -30,6 +30,11 @@ #include <dt-bindings/arm/qcom,ids.h> +enum ipq8074_versions { + IPQ8074_HAWKEYE_VERSION = 0, + IPQ8074_ACORN_VERSION, +}; + struct qcom_cpufreq_drv; struct qcom_cpufreq_match_data { @@ -203,6 +208,44 @@ static int qcom_cpufreq_krait_name_version(struct device *cpu_dev, return ret; } +static int qcom_cpufreq_ipq8074_name_version(struct device *cpu_dev, + struct nvmem_cell *speedbin_nvmem, + char **pvs_name, + struct qcom_cpufreq_drv *drv) +{ + u32 msm_id; + int ret; + *pvs_name = NULL; + + ret = qcom_smem_get_soc_id(&msm_id); + if (ret) + return ret; + + switch (msm_id) { + case QCOM_ID_IPQ8070A: + case QCOM_ID_IPQ8071A: + case QCOM_ID_IPQ8172: + case QCOM_ID_IPQ8173: + case QCOM_ID_IPQ8174: + drv->versions = BIT(IPQ8074_ACORN_VERSION); + break; + case QCOM_ID_IPQ8072A: + case QCOM_ID_IPQ8074A: + case QCOM_ID_IPQ8076A: + case QCOM_ID_IPQ8078A: + drv->versions = BIT(IPQ8074_HAWKEYE_VERSION); + break; + default: + dev_err(cpu_dev, + "SoC ID %u is not part of IPQ8074 family, limiting to 1.4GHz!\n", + msm_id); + drv->versions = BIT(IPQ8074_ACORN_VERSION); + break; + } + + return 0; +} + static const struct qcom_cpufreq_match_data match_data_kryo = { .get_version = qcom_cpufreq_kryo_name_version, }; @@ -217,6 +260,10 @@ static const struct qcom_cpufreq_match_data match_data_qcs404 = { .genpd_names = qcs404_genpd_names, }; +static const struct qcom_cpufreq_match_data match_data_ipq8074 = { + .get_version = qcom_cpufreq_ipq8074_name_version, +}; + static int qcom_cpufreq_probe(struct platform_device *pdev) { struct qcom_cpufreq_drv *drv; @@ -360,6 +407,7 @@ static const struct of_device_id qcom_cpufreq_match_list[] __initconst = { { .compatible = "qcom,msm8996", .data = &match_data_kryo }, { .compatible = "qcom,qcs404", .data = &match_data_qcs404 }, { .compatible = "qcom,ipq8064", .data = &match_data_krait }, + { .compatible = "qcom,ipq8074", .data = &match_data_ipq8074 }, { .compatible = "qcom,apq8064", .data = &match_data_krait }, { .compatible = "qcom,msm8974", .data = &match_data_krait }, { .compatible = "qcom,msm8960", .data = &match_data_krait },