From patchwork Sun Dec 3 22:38:17 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Luca Weiss X-Patchwork-Id: 13477588 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (1024-bit key) header.d=z3ntu.xyz header.i=@z3ntu.xyz header.b="llMp50+Q" Received: from ahti.lucaweiss.eu (ahti.lucaweiss.eu [128.199.32.197]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 221C7D7; Sun, 3 Dec 2023 14:39:04 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=z3ntu.xyz; s=s1; t=1701643112; bh=AyoMw4dvaDEyMnTLIYSTqkfZ1N6USm0BkJt0iiRevj0=; h=From:Date:Subject:References:In-Reply-To:To:Cc; b=llMp50+QsFgCVqH6a5/MgcFkZp2PB2X6bulD5879cY6Rzrx8JupR3YZGPrPgfIfh4 6UBSMqvfxHbTTz29LROaECW0yU1xCzB7pzqrKA2VXiXUDD2lVAGQY73LrDIcwxnNXU SgBpo1uvBLjUNAsdRtlr22028r7UO8ioWxDRyXQw= From: Luca Weiss Date: Sun, 03 Dec 2023 23:38:17 +0100 Subject: [PATCH 1/2] ARM: dts: qcom: msm8226: Sort and clean up nodes Precedence: bulk X-Mailing-List: linux-arm-msm@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20231203-msm8226-cpu-v1-1-d18e83340b32@z3ntu.xyz> References: <20231203-msm8226-cpu-v1-0-d18e83340b32@z3ntu.xyz> In-Reply-To: <20231203-msm8226-cpu-v1-0-d18e83340b32@z3ntu.xyz> To: ~postmarketos/upstreaming@lists.sr.ht, phone-devel@vger.kernel.org, Andy Gross , Bjorn Andersson , Konrad Dybcio , Rob Herring , Krzysztof Kozlowski , Conor Dooley Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Luca Weiss , =?utf-8?q?Matti?= =?utf-8?q?_Lehtim=C3=A4ki?= X-Mailer: b4 0.12.4 X-Developer-Signature: v=1; a=openpgp-sha256; l=21112; i=luca@z3ntu.xyz; h=from:subject:message-id; bh=7//IHYULMATNI9hwMvYP2UU96OHXDfiBfgQjEqtKYFA=; b=owEBbQKS/ZANAwAIAXLYQ7idTddWAcsmYgBlbQNmQodZV3ndezN2lgLmIvERVb0Nm4nI9HaFU HnlMVR47G6JAjMEAAEIAB0WIQQ5utIvCCzakboVj/py2EO4nU3XVgUCZW0DZgAKCRBy2EO4nU3X VhLJEADX7Kc6QnW9Mh5NqSig1AndStG5qMFmpqYhYYGtCzC+optgwPOYuh/9Lx5ejZZOB+GyoY3 T/e29HYbPQIk1cQsG1/nFSXpaSc2yHZ7tlrAeHyvWm8aHEQCMjBTe5LE3KEUG18SLM/GdD5pS/Z 3VNlL1jAXZ6s8IlqnxdyxtpyUy1pe8WFaFgmvUDzuPtm73eN+Em6AmIgXsJX5PHMB6PI8hfZNii xGryAErQTT80L+zJgOwuEhl0K0/RSuIzsE2lWnUwKDOfyUfyp//HCKOsH5ltDxLhMc3REuCRB3C XvqoAruosOSPEqC762OLrpTDb9t+I1ixuklhvsBejO9QZeRGlHC3/tc0i0F2FMRATWJ4e0qR0ac /xoDgin+XaGKNKG1hG2ule7MlfVHsrUm0fmQ+riYu5kslcVQ0QtgNkkOeN7vRcoAfAGToNX+zH/ Jr/5+Tx8Gx20h7qPnnMykWfSbTpmmU4R/t0Nte7PMIUBYh6eXHVIxrtCIB3BhQQE0NWWLM806e7 pNm7BCvL1F9E7OkicmE01OYr79lwopOrAhfV+vlsWodg7QnlbhdZ0chk4WBT00W/98mboebKDMX M5XzR6cOzAT3rrvxyFtImhK8BzeCDvfc8NGfkyo64eIESIurR0O7d7IGccB9hS/usmcIonipmLZ m1IS7ruD6qKyVqQ== X-Developer-Key: i=luca@z3ntu.xyz; a=openpgp; fpr=BD04DA24C971B8D587B2B8D7FAF69CF6CD2D02CD From: Matti Lehtimäki Quite a few nodes haven't been sorted correctly by reg, so let's do this now so that future nodes can be added at the correct place. Also at the same time, move the status property last. No functional change intended. Signed-off-by: Matti Lehtimäki [luca: add more text to commit message] Signed-off-by: Luca Weiss Acked-by: Konrad Dybcio --- arch/arm/boot/dts/qcom/qcom-msm8226.dtsi | 660 +++++++++++++++---------------- 1 file changed, 330 insertions(+), 330 deletions(-) diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi index 97a377b5a0ec..8757bc0c8a0f 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi @@ -20,11 +20,6 @@ / { chosen { }; - memory@0 { - device_type = "memory"; - reg = <0x0 0x0>; - }; - clocks { xo_board: xo_board { compatible = "fixed-clock"; @@ -47,6 +42,11 @@ scm { }; }; + memory@0 { + device_type = "memory"; + reg = <0x0 0x0>; + }; + pmu { compatible = "arm,cortex-a7-pmu"; interrupts = ; }; + timer@f9020000 { + compatible = "arm,armv7-timer-mem"; + reg = <0xf9020000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + frame@f9021000 { + frame-number = <0>; + interrupts = , + ; + reg = <0xf9021000 0x1000>, + <0xf9022000 0x1000>; + }; + + frame@f9023000 { + frame-number = <1>; + interrupts = ; + reg = <0xf9023000 0x1000>; + status = "disabled"; + }; + + frame@f9024000 { + frame-number = <2>; + interrupts = ; + reg = <0xf9024000 0x1000>; + status = "disabled"; + }; + + frame@f9025000 { + frame-number = <3>; + interrupts = ; + reg = <0xf9025000 0x1000>; + status = "disabled"; + }; + + frame@f9026000 { + frame-number = <4>; + interrupts = ; + reg = <0xf9026000 0x1000>; + status = "disabled"; + }; + + frame@f9027000 { + frame-number = <5>; + interrupts = ; + reg = <0xf9027000 0x1000>; + status = "disabled"; + }; + + frame@f9028000 { + frame-number = <6>; + interrupts = ; + reg = <0xf9028000 0x1000>; + status = "disabled"; + }; + }; + sdhc_1: mmc@f9824900 { compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; @@ -201,22 +259,6 @@ sdhc_1: mmc@f9824900 { status = "disabled"; }; - sdhc_2: mmc@f98a4900 { - compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4"; - reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; - reg-names = "hc", "core"; - interrupts = , - ; - interrupt-names = "hc_irq", "pwr_irq"; - clocks = <&gcc GCC_SDCC2_AHB_CLK>, - <&gcc GCC_SDCC2_APPS_CLK>, - <&rpmcc RPM_SMD_XO_CLK_SRC>; - clock-names = "iface", "core", "xo"; - pinctrl-names = "default"; - pinctrl-0 = <&sdhc2_default_state>; - status = "disabled"; - }; - sdhc_3: mmc@f9864900 { compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf9864900 0x11c>, <0xf9864000 0x800>; @@ -233,6 +275,22 @@ sdhc_3: mmc@f9864900 { status = "disabled"; }; + sdhc_2: mmc@f98a4900 { + compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4"; + reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; + reg-names = "hc", "core"; + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "core", "xo"; + pinctrl-names = "default"; + pinctrl-0 = <&sdhc2_default_state>; + status = "disabled"; + }; + blsp1_uart1: serial@f991d000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0xf991d000 0x1000>; @@ -272,7 +330,6 @@ blsp1_uart4: serial@f9920000 { }; blsp1_i2c1: i2c@f9923000 { - status = "disabled"; compatible = "qcom,i2c-qup-v2.1.1"; reg = <0xf9923000 0x1000>; interrupts = ; @@ -282,10 +339,10 @@ blsp1_i2c1: i2c@f9923000 { pinctrl-0 = <&blsp1_i2c1_pins>; #address-cells = <1>; #size-cells = <0>; + status = "disabled"; }; blsp1_i2c2: i2c@f9924000 { - status = "disabled"; compatible = "qcom,i2c-qup-v2.1.1"; reg = <0xf9924000 0x1000>; interrupts = ; @@ -295,10 +352,10 @@ blsp1_i2c2: i2c@f9924000 { pinctrl-0 = <&blsp1_i2c2_pins>; #address-cells = <1>; #size-cells = <0>; + status = "disabled"; }; blsp1_i2c3: i2c@f9925000 { - status = "disabled"; compatible = "qcom,i2c-qup-v2.1.1"; reg = <0xf9925000 0x1000>; interrupts = ; @@ -308,10 +365,10 @@ blsp1_i2c3: i2c@f9925000 { pinctrl-0 = <&blsp1_i2c3_pins>; #address-cells = <1>; #size-cells = <0>; + status = "disabled"; }; blsp1_i2c4: i2c@f9926000 { - status = "disabled"; compatible = "qcom,i2c-qup-v2.1.1"; reg = <0xf9926000 0x1000>; interrupts = ; @@ -321,10 +378,10 @@ blsp1_i2c4: i2c@f9926000 { pinctrl-0 = <&blsp1_i2c4_pins>; #address-cells = <1>; #size-cells = <0>; + status = "disabled"; }; blsp1_i2c5: i2c@f9927000 { - status = "disabled"; compatible = "qcom,i2c-qup-v2.1.1"; reg = <0xf9927000 0x1000>; interrupts = ; @@ -334,6 +391,7 @@ blsp1_i2c5: i2c@f9927000 { pinctrl-0 = <&blsp1_i2c5_pins>; #address-cells = <1>; #size-cells = <0>; + status = "disabled"; }; blsp1_i2c6: i2c@f9928000 { @@ -351,33 +409,6 @@ blsp1_i2c6: i2c@f9928000 { status = "disabled"; }; - cci: cci@fda0c000 { - compatible = "qcom,msm8226-cci"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0xfda0c000 0x1000>; - interrupts = ; - clocks = <&mmcc CAMSS_TOP_AHB_CLK>, - <&mmcc CAMSS_CCI_CCI_AHB_CLK>, - <&mmcc CAMSS_CCI_CCI_CLK>; - clock-names = "camss_top_ahb", - "cci_ahb", - "cci"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&cci_default>; - pinctrl-1 = <&cci_sleep>; - - status = "disabled"; - - cci_i2c0: i2c-bus@0 { - reg = <0>; - clock-frequency = <400000>; - #address-cells = <1>; - #size-cells = <0>; - }; - }; - usb: usb@f9a55000 { compatible = "qcom,ci-hdrc"; reg = <0xf9a55000 0x200>, @@ -417,6 +448,18 @@ usb_hs_phy: phy { }; }; + rng@f9bff000 { + compatible = "qcom,prng"; + reg = <0xf9bff000 0x200>; + clocks = <&gcc GCC_PRNG_AHB_CLK>; + clock-names = "core"; + }; + + sram@fc190000 { + compatible = "qcom,msm8226-rpm-stats"; + reg = <0xfc190000 0x10000>; + }; + gcc: clock-controller@fc400000 { compatible = "qcom,gcc-msm8226"; reg = <0xfc400000 0x4000>; @@ -430,146 +473,28 @@ gcc: clock-controller@fc400000 { "sleep_clk"; }; - mmcc: clock-controller@fd8c0000 { - compatible = "qcom,mmcc-msm8226"; - reg = <0xfd8c0000 0x6000>; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; + rpm_msg_ram: sram@fc428000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0xfc428000 0x4000>; - clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, - <&gcc GCC_MMSS_GPLL0_CLK_SRC>, - <&gcc GPLL0_VOTE>, - <&gcc GPLL1_VOTE>, - <&rpmcc RPM_SMD_GFX3D_CLK_SRC>, - <0>, - <0>; - clock-names = "xo", - "mmss_gpll0_vote", - "gpll0_vote", - "gpll1_vote", - "gfx3d_clk_src", - "dsi0pll", - "dsi0pllbyte"; - }; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xfc428000 0x4000>; - tlmm: pinctrl@fd510000 { - compatible = "qcom,msm8226-pinctrl"; - reg = <0xfd510000 0x4000>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&tlmm 0 0 117>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = ; - - blsp1_i2c1_pins: blsp1-i2c1-state { - pins = "gpio2", "gpio3"; - function = "blsp_i2c1"; - drive-strength = <2>; - bias-disable; + apss_master_stats: sram@150 { + reg = <0x150 0x14>; }; - blsp1_i2c2_pins: blsp1-i2c2-state { - pins = "gpio6", "gpio7"; - function = "blsp_i2c2"; - drive-strength = <2>; - bias-disable; + mpss_master_stats: sram@b50 { + reg = <0xb50 0x14>; }; - blsp1_i2c3_pins: blsp1-i2c3-state { - pins = "gpio10", "gpio11"; - function = "blsp_i2c3"; - drive-strength = <2>; - bias-disable; + lpss_master_stats: sram@1550 { + reg = <0x1550 0x14>; }; - blsp1_i2c4_pins: blsp1-i2c4-state { - pins = "gpio14", "gpio15"; - function = "blsp_i2c4"; - drive-strength = <2>; - bias-disable; - }; - - blsp1_i2c5_pins: blsp1-i2c5-state { - pins = "gpio18", "gpio19"; - function = "blsp_i2c5"; - drive-strength = <2>; - bias-disable; - }; - - blsp1_i2c6_pins: blsp1-i2c6-state { - pins = "gpio22", "gpio23"; - function = "blsp_i2c6"; - drive-strength = <2>; - bias-disable; - }; - - cci_default: cci-default-state { - pins = "gpio29", "gpio30"; - function = "cci_i2c0"; - - drive-strength = <2>; - bias-disable; - }; - - cci_sleep: cci-sleep-state { - pins = "gpio29", "gpio30"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - - sdhc1_default_state: sdhc1-default-state { - clk-pins { - pins = "sdc1_clk"; - drive-strength = <10>; - bias-disable; - }; - - cmd-data-pins { - pins = "sdc1_cmd", "sdc1_data"; - drive-strength = <10>; - bias-pull-up; - }; - }; - - sdhc2_default_state: sdhc2-default-state { - clk-pins { - pins = "sdc2_clk"; - drive-strength = <10>; - bias-disable; - }; - - cmd-data-pins { - pins = "sdc2_cmd", "sdc2_data"; - drive-strength = <10>; - bias-pull-up; - }; - }; - - sdhc3_default_state: sdhc3-default-state { - clk-pins { - pins = "gpio44"; - function = "sdc3"; - drive-strength = <8>; - bias-disable; - }; - - cmd-pins { - pins = "gpio43"; - function = "sdc3"; - drive-strength = <8>; - bias-pull-up; - }; - - data-pins { - pins = "gpio39", "gpio40", "gpio41", "gpio42"; - function = "sdc3"; - drive-strength = <8>; - bias-pull-up; - }; + pronto_master_stats: sram@1f50 { + reg = <0x1f50 0x14>; }; }; @@ -714,170 +639,153 @@ spmi_bus: spmi@fc4cf000 { #interrupt-cells = <4>; }; - rng@f9bff000 { - compatible = "qcom,prng"; - reg = <0xf9bff000 0x200>; - clocks = <&gcc GCC_PRNG_AHB_CLK>; - clock-names = "core"; - }; - - timer@f9020000 { - compatible = "arm,armv7-timer-mem"; - reg = <0xf9020000 0x1000>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - frame@f9021000 { - frame-number = <0>; - interrupts = , - ; - reg = <0xf9021000 0x1000>, - <0xf9022000 0x1000>; - }; - - frame@f9023000 { - frame-number = <1>; - interrupts = ; - reg = <0xf9023000 0x1000>; - status = "disabled"; - }; - - frame@f9024000 { - frame-number = <2>; - interrupts = ; - reg = <0xf9024000 0x1000>; - status = "disabled"; - }; - - frame@f9025000 { - frame-number = <3>; - interrupts = ; - reg = <0xf9025000 0x1000>; - status = "disabled"; - }; - - frame@f9026000 { - frame-number = <4>; - interrupts = ; - reg = <0xf9026000 0x1000>; - status = "disabled"; - }; - - frame@f9027000 { - frame-number = <5>; - interrupts = ; - reg = <0xf9027000 0x1000>; - status = "disabled"; - }; - - frame@f9028000 { - frame-number = <6>; - interrupts = ; - reg = <0xf9028000 0x1000>; - status = "disabled"; - }; - }; - - sram@fc190000 { - compatible = "qcom,msm8226-rpm-stats"; - reg = <0xfc190000 0x10000>; - }; - - rpm_msg_ram: sram@fc428000 { - compatible = "qcom,rpm-msg-ram"; - reg = <0xfc428000 0x4000>; - - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0xfc428000 0x4000>; - - apss_master_stats: sram@150 { - reg = <0x150 0x14>; - }; - - mpss_master_stats: sram@b50 { - reg = <0xb50 0x14>; - }; - - lpss_master_stats: sram@1550 { - reg = <0x1550 0x14>; - }; - - pronto_master_stats: sram@1f50 { - reg = <0x1f50 0x14>; - }; - }; - tcsr_mutex: hwlock@fd484000 { compatible = "qcom,msm8226-tcsr-mutex", "qcom,tcsr-mutex"; reg = <0xfd484000 0x1000>; #hwlock-cells = <1>; }; - adsp: remoteproc@fe200000 { - compatible = "qcom,msm8226-adsp-pil"; - reg = <0xfe200000 0x100>; + tlmm: pinctrl@fd510000 { + compatible = "qcom,msm8226-pinctrl"; + reg = <0xfd510000 0x4000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 117>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = ; - interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; + blsp1_i2c1_pins: blsp1-i2c1-state { + pins = "gpio2", "gpio3"; + function = "blsp_i2c1"; + drive-strength = <2>; + bias-disable; + }; - power-domains = <&rpmpd MSM8226_VDDCX>; - power-domain-names = "cx"; + blsp1_i2c2_pins: blsp1-i2c2-state { + pins = "gpio6", "gpio7"; + function = "blsp_i2c2"; + drive-strength = <2>; + bias-disable; + }; - clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; - clock-names = "xo"; + blsp1_i2c3_pins: blsp1-i2c3-state { + pins = "gpio10", "gpio11"; + function = "blsp_i2c3"; + drive-strength = <2>; + bias-disable; + }; - memory-region = <&adsp_region>; + blsp1_i2c4_pins: blsp1-i2c4-state { + pins = "gpio14", "gpio15"; + function = "blsp_i2c4"; + drive-strength = <2>; + bias-disable; + }; - qcom,smem-states = <&adsp_smp2p_out 0>; - qcom,smem-state-names = "stop"; + blsp1_i2c5_pins: blsp1-i2c5-state { + pins = "gpio18", "gpio19"; + function = "blsp_i2c5"; + drive-strength = <2>; + bias-disable; + }; - status = "disabled"; + blsp1_i2c6_pins: blsp1-i2c6-state { + pins = "gpio22", "gpio23"; + function = "blsp_i2c6"; + drive-strength = <2>; + bias-disable; + }; - smd-edge { - interrupts = ; + cci_default: cci-default-state { + pins = "gpio29", "gpio30"; + function = "cci_i2c0"; - qcom,ipc = <&apcs 8 8>; - qcom,smd-edge = <1>; + drive-strength = <2>; + bias-disable; + }; - label = "lpass"; + cci_sleep: cci-sleep-state { + pins = "gpio29", "gpio30"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + sdhc1_default_state: sdhc1-default-state { + clk-pins { + pins = "sdc1_clk"; + drive-strength = <10>; + bias-disable; + }; + + cmd-data-pins { + pins = "sdc1_cmd", "sdc1_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + sdhc2_default_state: sdhc2-default-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <10>; + bias-disable; + }; + + cmd-data-pins { + pins = "sdc2_cmd", "sdc2_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + sdhc3_default_state: sdhc3-default-state { + clk-pins { + pins = "gpio44"; + function = "sdc3"; + drive-strength = <8>; + bias-disable; + }; + + cmd-pins { + pins = "gpio43"; + function = "sdc3"; + drive-strength = <8>; + bias-pull-up; + }; + + data-pins { + pins = "gpio39", "gpio40", "gpio41", "gpio42"; + function = "sdc3"; + drive-strength = <8>; + bias-pull-up; + }; }; }; - sram@fdd00000 { - compatible = "qcom,msm8226-ocmem"; - reg = <0xfdd00000 0x2000>, - <0xfec00000 0x20000>; - reg-names = "ctrl", "mem"; - ranges = <0 0xfec00000 0x20000>; - clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>; - clock-names = "core"; + mmcc: clock-controller@fd8c0000 { + compatible = "qcom,mmcc-msm8226"; + reg = <0xfd8c0000 0x6000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; - #address-cells = <1>; - #size-cells = <1>; - - gmu_sram: gmu-sram@0 { - reg = <0x0 0x20000>; - }; - }; - - sram@fe805000 { - compatible = "qcom,msm8226-imem", "syscon", "simple-mfd"; - reg = <0xfe805000 0x1000>; - - reboot-mode { - compatible = "syscon-reboot-mode"; - offset = <0x65c>; - - mode-bootloader = <0x77665500>; - mode-normal = <0x77665501>; - mode-recovery = <0x77665502>; - }; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&gcc GCC_MMSS_GPLL0_CLK_SRC>, + <&gcc GPLL0_VOTE>, + <&gcc GPLL1_VOTE>, + <&rpmcc RPM_SMD_GFX3D_CLK_SRC>, + <0>, + <0>; + clock-names = "xo", + "mmss_gpll0_vote", + "gpll0_vote", + "gpll1_vote", + "gfx3d_clk_src", + "dsi0pll", + "dsi0pllbyte"; }; mdss: display-subsystem@fd900000 { @@ -1006,6 +914,98 @@ mdss_dsi0_phy: phy@fd922a00 { "ref"; }; }; + + cci: cci@fda0c000 { + compatible = "qcom,msm8226-cci"; + reg = <0xfda0c000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = ; + clocks = <&mmcc CAMSS_TOP_AHB_CLK>, + <&mmcc CAMSS_CCI_CCI_AHB_CLK>, + <&mmcc CAMSS_CCI_CCI_CLK>; + clock-names = "camss_top_ahb", + "cci_ahb", + "cci"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cci_default>; + pinctrl-1 = <&cci_sleep>; + + status = "disabled"; + + cci_i2c0: i2c-bus@0 { + reg = <0>; + clock-frequency = <400000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + sram@fdd00000 { + compatible = "qcom,msm8226-ocmem"; + reg = <0xfdd00000 0x2000>, + <0xfec00000 0x20000>; + reg-names = "ctrl", "mem"; + ranges = <0 0xfec00000 0x20000>; + clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>; + clock-names = "core"; + + #address-cells = <1>; + #size-cells = <1>; + + gmu_sram: gmu-sram@0 { + reg = <0x0 0x20000>; + }; + }; + + adsp: remoteproc@fe200000 { + compatible = "qcom,msm8226-adsp-pil"; + reg = <0xfe200000 0x100>; + + interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; + + power-domains = <&rpmpd MSM8226_VDDCX>; + power-domain-names = "cx"; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "xo"; + + memory-region = <&adsp_region>; + + qcom,smem-states = <&adsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + smd-edge { + interrupts = ; + + qcom,ipc = <&apcs 8 8>; + qcom,smd-edge = <1>; + + label = "lpass"; + }; + }; + + sram@fe805000 { + compatible = "qcom,msm8226-imem", "syscon", "simple-mfd"; + reg = <0xfe805000 0x1000>; + + reboot-mode { + compatible = "syscon-reboot-mode"; + offset = <0x65c>; + + mode-bootloader = <0x77665500>; + mode-normal = <0x77665501>; + mode-recovery = <0x77665502>; + }; + }; }; thermal-zones {