diff mbox series

[01/10] dt-bindings: clock: Drop the SM8650 DISPCC dedicated schema

Message ID 20231212-x1e80100-clock-controllers-v1-1-0de1af44dcb3@linaro.org (mailing list archive)
State Superseded
Headers show
Series clk: qcom: Add TCSR, GPU, CAM and DISP clock controllers for X1E80100 | expand

Commit Message

Abel Vesa Dec. 11, 2023, 10:45 p.m. UTC 
The block is the same between these platforms, at least from devicetree
point of view. So drop the dedicated schema and use the SM8550 one instead.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
 .../bindings/clock/qcom,sm8550-dispcc.yaml         |   5 +-
 .../bindings/clock/qcom,sm8650-dispcc.yaml         | 106 ---------------------
 2 files changed, 4 insertions(+), 107 deletions(-)

Comments

Krzysztof Kozlowski Dec. 12, 2023, 8:50 a.m. UTC | #1 
On 11/12/2023 23:45, Abel Vesa wrote:
> The block is the same between these platforms, at least from devicetree
> point of view. So drop the dedicated schema and use the SM8550 one instead.
> 
> Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
> ---

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8550-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8550-dispcc.yaml
index c129f8c16b50..369a0491f8d6 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sm8550-dispcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sm8550-dispcc.yaml
@@ -14,12 +14,15 @@  description: |
   Qualcomm display clock control module provides the clocks, resets and power
   domains on SM8550.
 
-  See also:: include/dt-bindings/clock/qcom,sm8550-dispcc.h
+  See also:
+  - include/dt-bindings/clock/qcom,sm8550-dispcc.h
+  - include/dt-bindings/clock/qcom,sm8650-dispcc.h
 
 properties:
   compatible:
     enum:
       - qcom,sm8550-dispcc
+      - qcom,sm8650-dispcc
 
   clocks:
     items:
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8650-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8650-dispcc.yaml
deleted file mode 100644
index 5e0c45c380f5..000000000000
--- a/Documentation/devicetree/bindings/clock/qcom,sm8650-dispcc.yaml
+++ /dev/null
@@ -1,106 +0,0 @@ 
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/clock/qcom,sm8650-dispcc.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Qualcomm Display Clock & Reset Controller for SM8650
-
-maintainers:
-  - Bjorn Andersson <andersson@kernel.org>
-  - Neil Armstrong <neil.armstrong@linaro.org>
-
-description: |
-  Qualcomm display clock control module provides the clocks, resets and power
-  domains on SM8650.
-
-  See also:: include/dt-bindings/clock/qcom,sm8650-dispcc.h
-
-properties:
-  compatible:
-    enum:
-      - qcom,sm8650-dispcc
-
-  clocks:
-    items:
-      - description: Board XO source
-      - description: Board Always On XO source
-      - description: Display's AHB clock
-      - description: sleep clock
-      - description: Byte clock from DSI PHY0
-      - description: Pixel clock from DSI PHY0
-      - description: Byte clock from DSI PHY1
-      - description: Pixel clock from DSI PHY1
-      - description: Link clock from DP PHY0
-      - description: VCO DIV clock from DP PHY0
-      - description: Link clock from DP PHY1
-      - description: VCO DIV clock from DP PHY1
-      - description: Link clock from DP PHY2
-      - description: VCO DIV clock from DP PHY2
-      - description: Link clock from DP PHY3
-      - description: VCO DIV clock from DP PHY3
-
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
-  power-domains:
-    description:
-      A phandle and PM domain specifier for the MMCX power domain.
-    maxItems: 1
-
-  required-opps:
-    description:
-      A phandle to an OPP node describing required MMCX performance point.
-    maxItems: 1
-
-required:
-  - compatible
-  - reg
-  - clocks
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
-
-additionalProperties: false
-
-examples:
-  - |
-    #include <dt-bindings/clock/qcom,sm8650-gcc.h>
-    #include <dt-bindings/clock/qcom,rpmh.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
-    #include <dt-bindings/power/qcom,rpmhpd.h>
-    clock-controller@af00000 {
-      compatible = "qcom,sm8650-dispcc";
-      reg = <0x0af00000 0x10000>;
-      clocks = <&rpmhcc RPMH_CXO_CLK>,
-               <&rpmhcc RPMH_CXO_CLK_A>,
-               <&gcc GCC_DISP_AHB_CLK>,
-               <&sleep_clk>,
-               <&dsi0_phy 0>,
-               <&dsi0_phy 1>,
-               <&dsi1_phy 0>,
-               <&dsi1_phy 1>,
-               <&dp0_phy 0>,
-               <&dp0_phy 1>,
-               <&dp1_phy 0>,
-               <&dp1_phy 1>,
-               <&dp2_phy 0>,
-               <&dp2_phy 1>,
-               <&dp3_phy 0>,
-               <&dp3_phy 1>;
-      #clock-cells = <1>;
-      #reset-cells = <1>;
-      #power-domain-cells = <1>;
-      power-domains = <&rpmhpd RPMHPD_MMCX>;
-      required-opps = <&rpmhpd_opp_low_svs>;
-    };
-...