| Message ID | 20231212-x1e80100-dts-smb2360-v1-1-c28bb4d7105e@linaro.org (mailing list archive) |
|---|---|
| State | Changes Requested |
| Headers | show |
| Series | arm64: dts: qcom: Add SMB2360 pmic dtsi | expand |
On 23-12-12 11:39:52, Abel Vesa wrote: > Add nodes for SMB2360 in separate dtsi file. > Also add the eUSB2 repeater nodes. > > Signed-off-by: Abel Vesa <abel.vesa@linaro.org> > --- On a second thought, please ignore this one. This depends on the SPMI multi master work. Will send proper version later on. > arch/arm64/boot/dts/qcom/smb2360.dtsi | 51 +++++++++++++++++++++++++++++++++++ > 1 file changed, 51 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/smb2360.dtsi b/arch/arm64/boot/dts/qcom/smb2360.dtsi > new file mode 100644 > index 000000000000..782746a20403 > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/smb2360.dtsi > @@ -0,0 +1,51 @@ > +// SPDX-License-Identifier: BSD-3-Clause > +/* > + * Copyright (c) 2023, Linaro Limited > + */ > + > +#include <dt-bindings/interrupt-controller/irq.h> > +#include <dt-bindings/spmi/spmi.h> > + > +/ { > +}; > + > +&spmi1_bus { > + smb2360h: pmic@7 { > + compatible = "qcom,sm2360", "qcom,spmi-pmic"; > + reg = <0x7 SPMI_USID>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + smb2360_1_eusb2_repeater: phy@fd00 { > + compatible = "qcom,smb2360-eusb2-repeater"; > + reg = <0xfd00>; > + #phy-cells = <0>; > + }; > + }; > + > + smb2360k: pmic@a { > + compatible = "qcom,sm2360", "qcom,spmi-pmic"; > + reg = <0xa SPMI_USID>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + smb2360_2_eusb2_repeater: phy@fd00 { > + compatible = "qcom,smb2360-eusb2-repeater"; > + reg = <0xfd00>; > + #phy-cells = <0>; > + }; > + }; > + > + smb2360l: pmic@b { > + compatible = "qcom,sm2360", "qcom,spmi-pmic"; > + reg = <0xb SPMI_USID>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + smb2360_3_eusb2_repeater: phy@fd00 { > + compatible = "qcom,smb2360-eusb2-repeater"; > + reg = <0xfd00>; > + #phy-cells = <0>; > + }; > + }; > +}; > > --- > base-commit: bbd220ce4e29ed55ab079007cff0b550895258eb > change-id: 20231201-x1e80100-dts-smb2360-0c7c25f2e0a7 > > Best regards, > -- > Abel Vesa <abel.vesa@linaro.org> >
diff --git a/arch/arm64/boot/dts/qcom/smb2360.dtsi b/arch/arm64/boot/dts/qcom/smb2360.dtsi new file mode 100644 index 000000000000..782746a20403 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/smb2360.dtsi @@ -0,0 +1,51 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Linaro Limited + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +/ { +}; + +&spmi1_bus { + smb2360h: pmic@7 { + compatible = "qcom,sm2360", "qcom,spmi-pmic"; + reg = <0x7 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + smb2360_1_eusb2_repeater: phy@fd00 { + compatible = "qcom,smb2360-eusb2-repeater"; + reg = <0xfd00>; + #phy-cells = <0>; + }; + }; + + smb2360k: pmic@a { + compatible = "qcom,sm2360", "qcom,spmi-pmic"; + reg = <0xa SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + smb2360_2_eusb2_repeater: phy@fd00 { + compatible = "qcom,smb2360-eusb2-repeater"; + reg = <0xfd00>; + #phy-cells = <0>; + }; + }; + + smb2360l: pmic@b { + compatible = "qcom,sm2360", "qcom,spmi-pmic"; + reg = <0xb SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + smb2360_3_eusb2_repeater: phy@fd00 { + compatible = "qcom,smb2360-eusb2-repeater"; + reg = <0xfd00>; + #phy-cells = <0>; + }; + }; +};
Add nodes for SMB2360 in separate dtsi file. Also add the eUSB2 repeater nodes. Signed-off-by: Abel Vesa <abel.vesa@linaro.org> --- arch/arm64/boot/dts/qcom/smb2360.dtsi | 51 +++++++++++++++++++++++++++++++++++ 1 file changed, 51 insertions(+) --- base-commit: bbd220ce4e29ed55ab079007cff0b550895258eb change-id: 20231201-x1e80100-dts-smb2360-0c7c25f2e0a7 Best regards,