| Message ID | 20231220110015.25378-2-quic_kbajaj@quicinc.com (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | aa56130e88de50773f84de4039c7de81ab783744 |
| Headers | show |
| Series | Correcting the voltage setting for vph_pwr | expand |
On 20.12.2023 12:00, Komal Bajaj wrote: > Min and max voltages for vph_pwr should be same, otherwise rpmh > will not probe, so correcting the min and max voltages for vph_pwr. > > Fixes: 9af6a9f32ad0 ("arm64: dts: qcom: Add base qcm6490 idp board dts") > Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com> > --- 2.5V is just a bit low :D Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Konrad
diff --git a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts index 03e97e27d16d..74f5a43d53db 100644 --- a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts +++ b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts @@ -123,8 +123,8 @@ debug_vm_mem: debug-vm@d0600000 { vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; regulator-name = "vph_pwr"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <4350000>; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; }; };
Min and max voltages for vph_pwr should be same, otherwise rpmh will not probe, so correcting the min and max voltages for vph_pwr. Fixes: 9af6a9f32ad0 ("arm64: dts: qcom: Add base qcm6490 idp board dts") Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com> --- arch/arm64/boot/dts/qcom/qcm6490-idp.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) -- 2.42.0