diff mbox series

[v3,4/4] arm64: dts: qcom: sc8280xp: camss: Add CAMSS block definition

Message ID 20240109-linux-next-24-01-02-sc8280xp-camss-core-dtsi-v3-4-b8e3a74a6e6a@linaro.org (mailing list archive)
State Superseded
Headers show
Series arm64: dts: qcom: sc8280xp: Add CAMSS core dtsi support | expand

Commit Message

Bryan O'Donoghue Jan. 9, 2024, 4:06 p.m. UTC
Add CAMSS block definition for sc8280xp.

This drop contains definitions for the following components on sc8280xp:

VFE * 4
VFE Lite * 4
CSID * 4
CSIPHY * 4

This dtsi definition has been developed and validated on a Lenovo X13s
laptop.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 239 +++++++++++++++++++++++++++++++++
 1 file changed, 239 insertions(+)

Comments

Konrad Dybcio Jan. 10, 2024, 11:03 a.m. UTC | #1
On 1/9/24 17:06, Bryan O'Donoghue wrote:
> Add CAMSS block definition for sc8280xp.
> 
> This drop contains definitions for the following components on sc8280xp:
> 
> VFE * 4
> VFE Lite * 4
> CSID * 4
> CSIPHY * 4
> 
> This dtsi definition has been developed and validated on a Lenovo X13s
> laptop.
> 
> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
> ---
>   arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 239 +++++++++++++++++++++++++++++++++
>   1 file changed, 239 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> index f48dfa5e5f36..35bc31117b41 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> @@ -3614,6 +3614,245 @@ cci3_i2c1: i2c-bus@1 {
>   			};
>   		};
>   
> +		camss: camss@ac5a000 {
> +			compatible = "qcom,sc8280xp-camss";
> +
> +			reg = <0 0x0ac5a000 0 0x2000>,
> +			      <0 0x0ac5c000 0 0x2000>,
> +			      <0 0x0ac65000 0 0x2000>,
> +			      <0 0x0ac67000 0 0x2000>,
> +			      <0 0x0acaf000 0 0x4000>,
> +			      <0 0x0acb3000 0 0x1000>,
> +			      <0 0x0acb6000 0 0x4000>,
> +			      <0 0x0acba000 0 0x1000>,
> +			      <0 0x0acbd000 0 0x4000>,
> +			      <0 0x0acc1000 0 0x1000>,
> +			      <0 0x0acc4000 0 0x4000>,
> +			      <0 0x0acc8000 0 0x1000>,
> +			      <0 0x0accb000 0 0x4000>,
> +			      <0 0x0accf000 0 0x1000>,
> +			      <0 0x0acd2000 0 0x4000>,
> +			      <0 0x0acd6000 0 0x1000>,
> +			      <0 0x0acd9000 0 0x4000>,
> +			      <0 0x0acdd000 0 0x1000>,
> +			      <0 0x0ace0000 0 0x4000>,
> +			      <0 0x0ace4000 0 0x1000>;
> +
> +			reg-names = "csiphy2",
The random newlines kill consistency with everything else

Konrad
Bryan O'Donoghue Jan. 11, 2024, 11:47 a.m. UTC | #2
On 10/01/2024 11:03, Konrad Dybcio wrote:
> 
> 
> On 1/9/24 17:06, Bryan O'Donoghue wrote:
>> Add CAMSS block definition for sc8280xp.
>>
>> This drop contains definitions for the following components on sc8280xp:
>>
>> VFE * 4
>> VFE Lite * 4
>> CSID * 4
>> CSIPHY * 4
>>
>> This dtsi definition has been developed and validated on a Lenovo X13s
>> laptop.
>>
>> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
>> ---
>>   arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 239 
>> +++++++++++++++++++++++++++++++++
>>   1 file changed, 239 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi 
>> b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
>> index f48dfa5e5f36..35bc31117b41 100644
>> --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
>> @@ -3614,6 +3614,245 @@ cci3_i2c1: i2c-bus@1 {
>>               };
>>           };
>> +        camss: camss@ac5a000 {
>> +            compatible = "qcom,sc8280xp-camss";
>> +
>> +            reg = <0 0x0ac5a000 0 0x2000>,
>> +                  <0 0x0ac5c000 0 0x2000>,
>> +                  <0 0x0ac65000 0 0x2000>,
>> +                  <0 0x0ac67000 0 0x2000>,
>> +                  <0 0x0acaf000 0 0x4000>,
>> +                  <0 0x0acb3000 0 0x1000>,
>> +                  <0 0x0acb6000 0 0x4000>,
>> +                  <0 0x0acba000 0 0x1000>,
>> +                  <0 0x0acbd000 0 0x4000>,
>> +                  <0 0x0acc1000 0 0x1000>,
>> +                  <0 0x0acc4000 0 0x4000>,
>> +                  <0 0x0acc8000 0 0x1000>,
>> +                  <0 0x0accb000 0 0x4000>,
>> +                  <0 0x0accf000 0 0x1000>,
>> +                  <0 0x0acd2000 0 0x4000>,
>> +                  <0 0x0acd6000 0 0x1000>,
>> +                  <0 0x0acd9000 0 0x4000>,
>> +                  <0 0x0acdd000 0 0x1000>,
>> +                  <0 0x0ace0000 0 0x4000>,
>> +                  <0 0x0ace4000 0 0x1000>;
>> +
>> +            reg-names = "csiphy2",
> The random newlines kill consistency with everything else
> 
> Konrad

Not random.

What exactly are you asking for ?

---
bod
Konrad Dybcio Jan. 11, 2024, 12:20 p.m. UTC | #3
On 1/11/24 12:47, Bryan O'Donoghue wrote:
> On 10/01/2024 11:03, Konrad Dybcio wrote:
>>
>>
>> On 1/9/24 17:06, Bryan O'Donoghue wrote:
>>> Add CAMSS block definition for sc8280xp.
>>>
>>> This drop contains definitions for the following components on sc8280xp:
>>>
>>> VFE * 4
>>> VFE Lite * 4
>>> CSID * 4
>>> CSIPHY * 4
>>>
>>> This dtsi definition has been developed and validated on a Lenovo X13s
>>> laptop.
>>>
>>> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
>>> ---
>>>   arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 239 +++++++++++++++++++++++++++++++++
>>>   1 file changed, 239 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
>>> index f48dfa5e5f36..35bc31117b41 100644
>>> --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
>>> +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
>>> @@ -3614,6 +3614,245 @@ cci3_i2c1: i2c-bus@1 {
>>>               };
>>>           };
>>> +        camss: camss@ac5a000 {
>>> +            compatible = "qcom,sc8280xp-camss";
>>> +
>>> +            reg = <0 0x0ac5a000 0 0x2000>,
>>> +                  <0 0x0ac5c000 0 0x2000>,
>>> +                  <0 0x0ac65000 0 0x2000>,
>>> +                  <0 0x0ac67000 0 0x2000>,
>>> +                  <0 0x0acaf000 0 0x4000>,
>>> +                  <0 0x0acb3000 0 0x1000>,
>>> +                  <0 0x0acb6000 0 0x4000>,
>>> +                  <0 0x0acba000 0 0x1000>,
>>> +                  <0 0x0acbd000 0 0x4000>,
>>> +                  <0 0x0acc1000 0 0x1000>,
>>> +                  <0 0x0acc4000 0 0x4000>,
>>> +                  <0 0x0acc8000 0 0x1000>,
>>> +                  <0 0x0accb000 0 0x4000>,
>>> +                  <0 0x0accf000 0 0x1000>,
>>> +                  <0 0x0acd2000 0 0x4000>,
>>> +                  <0 0x0acd6000 0 0x1000>,
>>> +                  <0 0x0acd9000 0 0x4000>,
>>> +                  <0 0x0acdd000 0 0x1000>,
>>> +                  <0 0x0ace0000 0 0x4000>,
>>> +                  <0 0x0ace4000 0 0x1000>;
>>> +
>>> +            reg-names = "csiphy2",
>> The random newlines kill consistency with everything else
>>
>> Konrad
> 
> Not random.
> 
> What exactly are you asking for ?

You have newlines between e.g. reg and reg-names

This is not the case anywhere else

Konrad
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index f48dfa5e5f36..35bc31117b41 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -3614,6 +3614,245 @@  cci3_i2c1: i2c-bus@1 {
 			};
 		};
 
+		camss: camss@ac5a000 {
+			compatible = "qcom,sc8280xp-camss";
+
+			reg = <0 0x0ac5a000 0 0x2000>,
+			      <0 0x0ac5c000 0 0x2000>,
+			      <0 0x0ac65000 0 0x2000>,
+			      <0 0x0ac67000 0 0x2000>,
+			      <0 0x0acaf000 0 0x4000>,
+			      <0 0x0acb3000 0 0x1000>,
+			      <0 0x0acb6000 0 0x4000>,
+			      <0 0x0acba000 0 0x1000>,
+			      <0 0x0acbd000 0 0x4000>,
+			      <0 0x0acc1000 0 0x1000>,
+			      <0 0x0acc4000 0 0x4000>,
+			      <0 0x0acc8000 0 0x1000>,
+			      <0 0x0accb000 0 0x4000>,
+			      <0 0x0accf000 0 0x1000>,
+			      <0 0x0acd2000 0 0x4000>,
+			      <0 0x0acd6000 0 0x1000>,
+			      <0 0x0acd9000 0 0x4000>,
+			      <0 0x0acdd000 0 0x1000>,
+			      <0 0x0ace0000 0 0x4000>,
+			      <0 0x0ace4000 0 0x1000>;
+
+			reg-names = "csiphy2",
+				    "csiphy3",
+				    "csiphy0",
+				    "csiphy1",
+				    "vfe0",
+				    "csid0",
+				    "vfe1",
+				    "csid1",
+				    "vfe2",
+				    "csid2",
+				    "vfe_lite0",
+				    "csid0_lite",
+				    "vfe_lite1",
+				    "csid1_lite",
+				    "vfe_lite2",
+				    "csid2_lite",
+				    "vfe_lite3",
+				    "csid3_lite",
+				    "vfe3",
+				    "csid3";
+
+			interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 758 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 759 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 760 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 761 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 762 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 764 IRQ_TYPE_LEVEL_HIGH>;
+
+			interrupt-names = "csid1_lite",
+					  "vfe_lite1",
+					  "csiphy3",
+					  "csid0",
+					  "vfe0",
+					  "csid1",
+					  "vfe1",
+					  "csid0_lite",
+					  "vfe_lite0",
+					  "csiphy0",
+					  "csiphy1",
+					  "csiphy2",
+					  "csid2",
+					  "vfe2",
+					  "csid3_lite",
+					  "csid2_lite",
+					  "vfe_lite3",
+					  "vfe_lite2",
+					  "csid3",
+					  "vfe3";
+
+			power-domains = <&camcc IFE_0_GDSC>,
+					<&camcc IFE_1_GDSC>,
+					<&camcc IFE_2_GDSC>,
+					<&camcc IFE_3_GDSC>,
+					<&camcc TITAN_TOP_GDSC>;
+
+			power-domain-names = "ife0",
+					     "ife1",
+					     "ife2",
+					     "ife3",
+					     "top";
+
+			clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>,
+				 <&camcc CAMCC_CPAS_AHB_CLK>,
+				 <&camcc CAMCC_CSIPHY0_CLK>,
+				 <&camcc CAMCC_CSI0PHYTIMER_CLK>,
+				 <&camcc CAMCC_CSIPHY1_CLK>,
+				 <&camcc CAMCC_CSI1PHYTIMER_CLK>,
+				 <&camcc CAMCC_CSIPHY2_CLK>,
+				 <&camcc CAMCC_CSI2PHYTIMER_CLK>,
+				 <&camcc CAMCC_CSIPHY3_CLK>,
+				 <&camcc CAMCC_CSI3PHYTIMER_CLK>,
+				 <&camcc CAMCC_IFE_0_AXI_CLK>,
+				 <&camcc CAMCC_IFE_0_CLK>,
+				 <&camcc CAMCC_IFE_0_CPHY_RX_CLK>,
+				 <&camcc CAMCC_IFE_0_CSID_CLK>,
+				 <&camcc CAMCC_IFE_1_AXI_CLK>,
+				 <&camcc CAMCC_IFE_1_CLK>,
+				 <&camcc CAMCC_IFE_1_CPHY_RX_CLK>,
+				 <&camcc CAMCC_IFE_1_CSID_CLK>,
+				 <&camcc CAMCC_IFE_2_AXI_CLK>,
+				 <&camcc CAMCC_IFE_2_CLK>,
+				 <&camcc CAMCC_IFE_2_CPHY_RX_CLK>,
+				 <&camcc CAMCC_IFE_2_CSID_CLK>,
+				 <&camcc CAMCC_IFE_3_AXI_CLK>,
+				 <&camcc CAMCC_IFE_3_CLK>,
+				 <&camcc CAMCC_IFE_3_CPHY_RX_CLK>,
+				 <&camcc CAMCC_IFE_3_CSID_CLK>,
+				 <&camcc CAMCC_IFE_LITE_0_CLK>,
+				 <&camcc CAMCC_IFE_LITE_0_CPHY_RX_CLK>,
+				 <&camcc CAMCC_IFE_LITE_0_CSID_CLK>,
+				 <&camcc CAMCC_IFE_LITE_1_CLK>,
+				 <&camcc CAMCC_IFE_LITE_1_CPHY_RX_CLK>,
+				 <&camcc CAMCC_IFE_LITE_1_CSID_CLK>,
+				 <&camcc CAMCC_IFE_LITE_2_CLK>,
+				 <&camcc CAMCC_IFE_LITE_2_CPHY_RX_CLK>,
+				 <&camcc CAMCC_IFE_LITE_2_CSID_CLK>,
+				 <&camcc CAMCC_IFE_LITE_3_CLK>,
+				 <&camcc CAMCC_IFE_LITE_3_CPHY_RX_CLK>,
+				 <&camcc CAMCC_IFE_LITE_3_CSID_CLK>,
+				 <&gcc GCC_CAMERA_HF_AXI_CLK>,
+				 <&gcc GCC_CAMERA_SF_AXI_CLK>;
+
+			clock-names = "camnoc_axi",
+				      "cpas_ahb",
+				      "csiphy0",
+				      "csiphy0_timer",
+				      "csiphy1",
+				      "csiphy1_timer",
+				      "csiphy2",
+				      "csiphy2_timer",
+				      "csiphy3",
+				      "csiphy3_timer",
+				      "vfe0_axi",
+				      "vfe0",
+				      "vfe0_cphy_rx",
+				      "vfe0_csid",
+				      "vfe1_axi",
+				      "vfe1",
+				      "vfe1_cphy_rx",
+				      "vfe1_csid",
+				      "vfe2_axi",
+				      "vfe2",
+				      "vfe2_cphy_rx",
+				      "vfe2_csid",
+				      "vfe3_axi",
+				      "vfe3",
+				      "vfe3_cphy_rx",
+				      "vfe3_csid",
+				      "vfe_lite0",
+				      "vfe_lite0_cphy_rx",
+				      "vfe_lite0_csid",
+				      "vfe_lite1",
+				      "vfe_lite1_cphy_rx",
+				      "vfe_lite1_csid",
+				      "vfe_lite2",
+				      "vfe_lite2_cphy_rx",
+				      "vfe_lite2_csid",
+				      "vfe_lite3",
+				      "vfe_lite3_cphy_rx",
+				      "vfe_lite3_csid",
+				      "gcc_axi_hf",
+				      "gcc_axi_sf";
+
+			iommus = <&apps_smmu 0x2000 0x4e0>,
+				 <&apps_smmu 0x2020 0x4e0>,
+				 <&apps_smmu 0x2040 0x4e0>,
+				 <&apps_smmu 0x2060 0x4e0>,
+				 <&apps_smmu 0x2080 0x4e0>,
+				 <&apps_smmu 0x20e0 0x4e0>,
+				 <&apps_smmu 0x20c0 0x4e0>,
+				 <&apps_smmu 0x20a0 0x4e0>,
+				 <&apps_smmu 0x2400 0x4e0>,
+				 <&apps_smmu 0x2420 0x4e0>,
+				 <&apps_smmu 0x2440 0x4e0>,
+				 <&apps_smmu 0x2460 0x4e0>,
+				 <&apps_smmu 0x2480 0x4e0>,
+				 <&apps_smmu 0x24e0 0x4e0>,
+				 <&apps_smmu 0x24c0 0x4e0>,
+				 <&apps_smmu 0x24a0 0x4e0>;
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_CAMERA_CFG 0>,
+					<&mmss_noc MASTER_CAMNOC_HF 0 &mc_virt SLAVE_EBI1 0>,
+					<&mmss_noc MASTER_CAMNOC_SF 0 &mc_virt SLAVE_EBI1 0>,
+					<&mmss_noc MASTER_CAMNOC_ICP 0 &mc_virt SLAVE_EBI1 0>;
+			interconnect-names = "cam_ahb",
+					     "cam_hf_mnoc",
+					     "cam_sf_mnoc",
+					     "cam_sf_icp_mnoc";
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				port@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				port@2 {
+					reg = <2>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				port@3 {
+					reg = <3>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+		};
+
 		camcc: clock-controller@ad00000 {
 			compatible = "qcom,sc8280xp-camcc";
 			reg = <0 0x0ad00000 0 0x20000>;