diff mbox series

[v2,1/6] arm64: dts: qcom: pmi8950: Add USB vbus and id sensing nodes

Message ID 20240121-msm8976-dt-v2-1-7b186a02dc72@somainline.org (mailing list archive)
State Changes Requested
Headers show
Series arm64: dts: qcom: msm8956-loire: SDCard and USB support | expand

Commit Message

Marijn Suijten Jan. 21, 2024, 10:33 p.m. UTC 
USB sensing is performed on the PMIC, exposed as extcon nodes for use in
the relevant USB (otg) driver nodes as the hardware itself is not able
to sense USB presence (5V vbus) nor the role (ID pin).

Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
---
 arch/arm64/boot/dts/qcom/pmi8950.dtsi | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

Comments

Konrad Dybcio Feb. 6, 2024, 6:57 p.m. UTC | #1 
On 21.01.2024 23:33, Marijn Suijten wrote:
> USB sensing is performed on the PMIC, exposed as extcon nodes for use in
> the relevant USB (otg) driver nodes as the hardware itself is not able
> to sense USB presence (5V vbus) nor the role (ID pin).
> 
> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
> ---

I hope the USB_ID thing won't mess with a possible future charger impl

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/pmi8950.dtsi b/arch/arm64/boot/dts/qcom/pmi8950.dtsi
index 1029f3b1bb9a..49e97ebdbb3c 100644
--- a/arch/arm64/boot/dts/qcom/pmi8950.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmi8950.dtsi
@@ -12,6 +12,20 @@  pmic@2 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		pmi8950_usb_id: usb-id@1100 {
+			compatible = "qcom,pm8941-misc";
+			reg = <0x1100>;
+			interrupts = <0x2 0x11 0x3 IRQ_TYPE_NONE>;
+			interrupt-names = "usb_id";
+		};
+
+		pmi8950_usb_vbus: usb-detect@1300 {
+			compatible = "qcom,pm8941-misc";
+			reg = <0x1300>;
+			interrupts = <0x2 0x13 0x2 IRQ_TYPE_NONE>;
+			interrupt-names = "usb_vbus";
+		};
+
 		pmi8950_vadc: adc@3100 {
 			compatible = "qcom,spmi-vadc";
 			reg = <0x3100>;