diff mbox series

[v2,3/6] arm64: dts: qcom: pmi8950: Add missing ADC channels

Message ID 20240121-msm8976-dt-v2-3-7b186a02dc72@somainline.org (mailing list archive)
State Changes Requested
Headers show
Series arm64: dts: qcom: msm8956-loire: SDCard and USB support | expand

Commit Message

Marijn Suijten Jan. 21, 2024, 10:33 p.m. UTC 
These seem to have previously been excluded due to either not residing
on the test board, and/or lacking VADC_USB_DP/VADC_USB_DM definitions.
Now that the channel constants are included in dt-bindings, add the
channels to DT as well.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
---
 arch/arm64/boot/dts/qcom/pmi8950.dtsi | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/pmi8950.dtsi b/arch/arm64/boot/dts/qcom/pmi8950.dtsi
index 49e97ebdbb3c..bc341849b9fe 100644
--- a/arch/arm64/boot/dts/qcom/pmi8950.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmi8950.dtsi
@@ -69,6 +69,30 @@  channel@d {
 				qcom,pre-scaling = <1 1>;
 				label = "chg_temp";
 			};
+
+			channel@e {
+				reg = <VADC_GND_REF>;
+				qcom,pre-scaling = <1 1>;
+				label = "ref_gnd";
+			};
+
+			channel@f {
+				reg = <VADC_VDD_VADC>;
+				qcom,pre-scaling = <1 1>;
+				label = "ref_vdd";
+			};
+
+			channel@43 {
+				reg = <VADC_USB_DP>;
+				qcom,pre-scaling = <1 1>;
+				label = "usb_dp";
+			};
+
+			channel@44 {
+				reg = <VADC_USB_DM>;
+				qcom,pre-scaling = <1 1>;
+				label = "usb_dm";
+			};
 		};
 
 		pmi8950_mpps: mpps@a000 {