diff mbox series

[RFC,v4,09/11] scsi: ufs: core: Perform read back after disabling UIC_COMMAND_COMPL

Message ID 20240122-ufs-reset-ensure-effect-before-delay-v4-9-90a54c832508@redhat.com (mailing list archive)
State Superseded
Headers show
Series scsi: ufs: Remove overzealous memory barriers | expand

Commit Message

Andrew Halaney Jan. 22, 2024, 5:24 p.m. UTC 
Currently, the UIC_COMMAND_COMPL interrupt is disabled and a wmb() is
used to complete the register write before any following writes.

wmb() ensures the writes complete in that order, but completion doesn't
mean that it isn't stored in a buffer somewhere. The recommendation for
ensuring this bit has taken effect on the device is to perform a read
back to force it to make it all the way to the device. This is
documented in device-io.rst and a talk by Will Deacon on this can
be seen over here:

    https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678

Let's do that to ensure the bit hits the device. Because the wmb()'s
purpose wasn't to add extra ordering (on top of the ordering guaranteed
by writel()/readl()), it can safely be removed.

Fixes: d75f7fe495cf ("scsi: ufs: reduce the interrupts for power mode change requests")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
---
 drivers/ufs/core/ufshcd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c
index 9b6355555897..9bf490bb8eed 100644
--- a/drivers/ufs/core/ufshcd.c
+++ b/drivers/ufs/core/ufshcd.c
@@ -4240,7 +4240,7 @@  static int ufshcd_uic_pwr_ctrl(struct ufs_hba *hba, struct uic_command *cmd)
 		 * Make sure UIC command completion interrupt is disabled before
 		 * issuing UIC command.
 		 */
-		wmb();
+		ufshcd_readl(hba, REG_INTERRUPT_ENABLE);
 		reenable_intr = true;
 	}
 	spin_unlock_irqrestore(hba->host->host_lock, flags);