@@ -3590,16 +3590,15 @@ pcie0_phy: phy@1c04000 {
compatible = "qcom,sa8775p-qmp-gen4x2-pcie-phy";
reg = <0x0 0x1c04000 0x0 0x2000>;
- clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+ clocks = <&gcc GCC_PCIE_0_PHY_AUX_CLK>,
<&gcc GCC_PCIE_0_CFG_AHB_CLK>,
<&gcc GCC_PCIE_CLKREF_EN>,
<&gcc GCC_PCIE_0_PHY_RCHNG_CLK>,
<&gcc GCC_PCIE_0_PIPE_CLK>,
- <&gcc GCC_PCIE_0_PIPEDIV2_CLK>,
- <&gcc GCC_PCIE_0_PHY_AUX_CLK>;
+ <&gcc GCC_PCIE_0_PIPEDIV2_CLK>;
clock-names = "aux", "cfg_ahb", "ref", "rchng", "pipe",
- "pipediv2", "phy_aux";
+ "pipediv2";
assigned-clocks = <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>;
assigned-clock-rates = <100000000>;
@@ -3690,16 +3689,15 @@ pcie1_phy: phy@1c14000 {
compatible = "qcom,sa8775p-qmp-gen4x4-pcie-phy";
reg = <0x0 0x1c14000 0x0 0x4000>;
- clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
+ clocks = <&gcc GCC_PCIE_1_PHY_AUX_CLK>,
<&gcc GCC_PCIE_1_CFG_AHB_CLK>,
<&gcc GCC_PCIE_CLKREF_EN>,
<&gcc GCC_PCIE_1_PHY_RCHNG_CLK>,
<&gcc GCC_PCIE_1_PIPE_CLK>,
- <&gcc GCC_PCIE_1_PIPEDIV2_CLK>,
- <&gcc GCC_PCIE_1_PHY_AUX_CLK>;
+ <&gcc GCC_PCIE_1_PIPEDIV2_CLK>;
clock-names = "aux", "cfg_ahb", "ref", "rchng", "pipe",
- "pipediv2", "phy_aux";
+ "pipediv2";
assigned-clocks = <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>;
assigned-clock-rates = <100000000>;
PCIe PHY hw doesn't require PCIE_AUX_CLK for functioning. This clock is only required by the PCIe controller. Hence drop it from pcie_phy nodes. While at it, let's also rename "phy_aux" clock to "aux" clock and move it to first entry to maintain uniformity with other SoCs. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> --- arch/arm64/boot/dts/qcom/sa8775p.dtsi | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-)