| Message ID | 20240204-sdm630-nile-wled-v1-1-9f5c4f8147f2@somainline.org (mailing list archive) |
|---|---|
| State | Accepted |
| Headers | show |
| Series | arm64: dts: qcom: sdm630-nile: Enable and configure PM660L WLED | expand |
On Sun, 04 Feb 2024 18:35:22 +0100, Marijn Suijten wrote: > The board-specific (electrical) configuration was removed from PM660L in > 90ba636e40cb ("arm64: dts: qcom: pm660l: Remove board-specific WLED > configuration") as it is platform-dependent. We reintroduce it here in > the Nile board configuration (with a slightly lower current limit, as > per downstream DT sources) and enable it for use in the dsi0 node. > > > [...] Applied, thanks! [1/1] arm64: dts: qcom: sdm630-nile: Enable and configure PM660L WLED commit: 749c47ad3383f344ab080ccb1905e10b2470d70f Best regards,
diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi index 87d0293c728d..852aecfba95a 100644 --- a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi @@ -241,6 +241,16 @@ led@3 { }; }; +&pm660l_wled { + status = "okay"; + + qcom,switching-freq = <800>; + qcom,ovp-millivolt = <29600>; + qcom,current-boost-limit = <970>; + qcom,current-limit-microamp = <17500>; + qcom,num-strings = <2>; +}; + &pon_pwrkey { status = "okay"; };
The board-specific (electrical) configuration was removed from PM660L in 90ba636e40cb ("arm64: dts: qcom: pm660l: Remove board-specific WLED configuration") as it is platform-dependent. We reintroduce it here in the Nile board configuration (with a slightly lower current limit, as per downstream DT sources) and enable it for use in the dsi0 node. Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> --- arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+) --- base-commit: 01af33cc9894b4489fb68fa35c40e9fe85df63dc change-id: 20240204-sdm630-nile-wled-e23d7a1df0ce Best regards,