From patchwork Mon Feb 5 16:48:42 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Christian Marangi X-Patchwork-Id: 13545861 Received: from mail-wm1-f42.google.com (mail-wm1-f42.google.com [209.85.128.42]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 4DB3A48CC6; Mon, 5 Feb 2024 16:49:17 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.128.42 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1707151759; cv=none; b=kDV3jYbd8WbOony1FYgzNs443brE9A1RbOT9f7CrH1eBjXLo4yLuNxOa9fzLxOrQXUbQLJb2nCn6rS80Ac5o3+qj65V8CmuQv8w8DqkfwpF3O72Os8WtrD+dqmfFFkQKslYHu8wjCObvgHftIr+gSzTL0LzkjH4JPhND9JIfkd0= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1707151759; c=relaxed/simple; bh=CpFiKt9arcAd/DdvTfXA++kS54iSLovvRvO3R5Xb+n0=; h=From:To:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=FONmCxTOhvz/lGsDboIkN03IPpSejAHHmQsR++C7MYoG1GXFskVttKhxJzc1XxQ7fWhNwLazR2OUao7BHZyATLRpgPk3YLFANsPGROc12262MSRqj/tz/ixbMHUI08TVypc0zEDj8s9RSGroAtBWopLD+JFx3pSjIau0j3zaY7o= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com; spf=pass smtp.mailfrom=gmail.com; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b=dulMkqUV; arc=none smtp.client-ip=209.85.128.42 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=gmail.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="dulMkqUV" Received: by mail-wm1-f42.google.com with SMTP id 5b1f17b1804b1-40ef3f351d2so32318365e9.1; Mon, 05 Feb 2024 08:49:16 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20230601; t=1707151755; x=1707756555; darn=vger.kernel.org; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:to:from:from:to:cc:subject:date:message-id :reply-to; bh=bYMtIg24uuXRIsgSP6U1ynvtwWf0bDfr47PWEVug3DI=; b=dulMkqUVKhjak1U9MiqknnEk24hi34gEIH2n3HDK0hzv4NkhdmY5oZOmsBT2M3KoGy yhghr+ROc1HX7g9FKT5qDDiBgnkuGkIly9TX348TLUCJfdDttA5y8C7nDI6ujuTidGNv OwjXenArg/sBpEXu9cCyaGEfLx6/yRoAEwbQQUwIwNUhXU+aVDpV2LdQNAYE9rt+08JC 6xijSIt2FaJ/SF0pIcuaAGJNbiQgDxePBklKmwJDBSvgsCheJ7/KENLd96cuegt3BDzi Xja9CpeEnNlM1WCe1ZePGhnzUrF1+NUuWEeWCDjze/2S3V2DkwG7BpDIpbzIDAOOjM6k Eb8A== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1707151755; x=1707756555; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=bYMtIg24uuXRIsgSP6U1ynvtwWf0bDfr47PWEVug3DI=; b=FpcP14YxD4xpHRbimp3tG7+2+gNNKTNtVE/ESkKljbUXhAIaSzp1QHMrcZ2dW1w/xH 2cFr9moZnGo6f/6IRN4cMFsmskOt/yVaxJcBXJZrVAeNTWY00LRSbWoH+yWwh2ZWceQs AEIMOG+fBFRDV5uphgPEWbL6uIldckDncAKjfSaP6IZ5NHBkEhCG0oXo+U1Wg9a+90jd IhV0+cI/ayTYkxoUoBWYWifa9nyFquhwsK4qySGxB7tXmMWElGXEAnDoPklD8HHBU0uB WvWkygADiNAfeYRXo1C8osd9QTXXhVB/sjtKapblRMA/1Pdrfx3GJkPDkcWdYqlNuz74 NfEw== X-Gm-Message-State: AOJu0YxwS0mtKw72ezXuGVTm2tYjQFrBXyZ1A66P479WEZx1Sad5YV5b fQ+XszqccsVE4eSoDDDmM8nIi0KDYhDKJpx/BQNE8/mlywQplBDJ X-Google-Smtp-Source: AGHT+IEi8QATNYyOI1Fy4+ITBi+5rJSUtOAAKFklc4IbmDszrmnMRXUZKvO7SLJkh2anNw3N/gB6Hg== X-Received: by 2002:a05:600c:35cf:b0:40f:dc7e:e286 with SMTP id r15-20020a05600c35cf00b0040fdc7ee286mr177541wmq.13.1707151755398; Mon, 05 Feb 2024 08:49:15 -0800 (PST) X-Forwarded-Encrypted: i=0; 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 Received: from localhost.localdomain (93-34-89-13.ip49.fastwebnet.it. [93.34.89.13]) by smtp.googlemail.com with ESMTPSA id k2-20020a05600c1c8200b0040fafd84095sm9140567wms.41.2024.02.05.08.49.14 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 05 Feb 2024 08:49:15 -0800 (PST) From: Christian Marangi To: "David S. Miller" , Eric Dumazet , Jakub Kicinski , Paolo Abeni , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Bjorn Andersson , Konrad Dybcio , Andrew Lunn , Heiner Kallweit , Russell King , Florian Fainelli , Broadcom internal kernel review list , Christian Marangi , Robert Marko , netdev@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org Subject: [net-next PATCH v6 10/10] net: phy: qca807x: add support for configurable LED Date: Mon, 5 Feb 2024 17:48:42 +0100 Message-ID: <20240205164851.1351-11-ansuelsmth@gmail.com> X-Mailer: git-send-email 2.43.0 In-Reply-To: <20240205164851.1351-1-ansuelsmth@gmail.com> References: <20240205164851.1351-1-ansuelsmth@gmail.com> Precedence: bulk X-Mailing-List: linux-arm-msm@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 QCA8072/5 have up to 2 LEDs attached for PHY. LEDs can be configured to be ON/hw blink or be set to HW control. Hw blink mode is set to blink at 4Hz or 250ms. PHY can support both copper (TP) or fiber (FIBRE) kind and supports different HW control modes based on the port type. HW control modes supported for netdev trigger for copper ports are: - LINK_10 - LINK_100 - LINK_1000 - TX - RX - FULL_DUPLEX - HALF_DUPLEX HW control modes supported for netdev trigger for fiber ports are: - LINK_100 - LINK_1000 - TX - RX - FULL_DUPLEX - HALF_DUPLEX LED support conflicts with GPIO controller feature and must be disabled if gpio-controller is used for the PHY. Signed-off-by: Christian Marangi --- drivers/net/phy/qcom/qca807x.c | 256 ++++++++++++++++++++++++++++++++- 1 file changed, 254 insertions(+), 2 deletions(-) diff --git a/drivers/net/phy/qcom/qca807x.c b/drivers/net/phy/qcom/qca807x.c index de8ea94c15f7..1ec60eeca3c3 100644 --- a/drivers/net/phy/qcom/qca807x.c +++ b/drivers/net/phy/qcom/qca807x.c @@ -57,8 +57,18 @@ #define QCA807X_MMD7_LED_CTRL(x) (0x8074 + ((x) * 2)) #define QCA807X_MMD7_LED_FORCE_CTRL(x) (0x8075 + ((x) * 2)) -#define QCA807X_GPIO_FORCE_EN BIT(15) -#define QCA807X_GPIO_FORCE_MODE_MASK GENMASK(14, 13) +/* LED hw control pattern for fiber port */ +#define QCA807X_LED_FIBER_PATTERN_MASK GENMASK(11, 1) +#define QCA807X_LED_FIBER_TXACT_BLK_EN BIT(10) +#define QCA807X_LED_FIBER_RXACT_BLK_EN BIT(9) +#define QCA807X_LED_FIBER_FDX_ON_EN BIT(6) +#define QCA807X_LED_FIBER_HDX_ON_EN BIT(5) +#define QCA807X_LED_FIBER_1000BX_ON_EN BIT(2) +#define QCA807X_LED_FIBER_100FX_ON_EN BIT(1) + +/* Some device repurpose the LED as GPIO out */ +#define QCA807X_GPIO_FORCE_EN QCA808X_LED_FORCE_EN +#define QCA807X_GPIO_FORCE_MODE_MASK QCA808X_LED_FORCE_MODE_MASK #define QCA807X_FUNCTION_CONTROL 0x10 #define QCA807X_FC_MDI_CROSSOVER_MODE_MASK GENMASK(6, 5) @@ -121,6 +131,233 @@ static int qca807x_cable_test_start(struct phy_device *phydev) return 0; } +static int qca807x_led_parse_netdev(struct phy_device *phydev, unsigned long rules, + u16 *offload_trigger) +{ + /* Parsing specific to netdev trigger */ + switch (phydev->port) { + case PORT_TP: + if (test_bit(TRIGGER_NETDEV_TX, &rules)) + *offload_trigger |= QCA808X_LED_TX_BLINK; + if (test_bit(TRIGGER_NETDEV_RX, &rules)) + *offload_trigger |= QCA808X_LED_RX_BLINK; + if (test_bit(TRIGGER_NETDEV_LINK_10, &rules)) + *offload_trigger |= QCA808X_LED_SPEED10_ON; + if (test_bit(TRIGGER_NETDEV_LINK_100, &rules)) + *offload_trigger |= QCA808X_LED_SPEED100_ON; + if (test_bit(TRIGGER_NETDEV_LINK_1000, &rules)) + *offload_trigger |= QCA808X_LED_SPEED1000_ON; + if (test_bit(TRIGGER_NETDEV_HALF_DUPLEX, &rules)) + *offload_trigger |= QCA808X_LED_HALF_DUPLEX_ON; + if (test_bit(TRIGGER_NETDEV_FULL_DUPLEX, &rules)) + *offload_trigger |= QCA808X_LED_FULL_DUPLEX_ON; + break; + case PORT_FIBRE: + if (test_bit(TRIGGER_NETDEV_TX, &rules)) + *offload_trigger |= QCA807X_LED_FIBER_TXACT_BLK_EN; + if (test_bit(TRIGGER_NETDEV_RX, &rules)) + *offload_trigger |= QCA807X_LED_FIBER_RXACT_BLK_EN; + if (test_bit(TRIGGER_NETDEV_LINK_100, &rules)) + *offload_trigger |= QCA807X_LED_FIBER_100FX_ON_EN; + if (test_bit(TRIGGER_NETDEV_LINK_1000, &rules)) + *offload_trigger |= QCA807X_LED_FIBER_1000BX_ON_EN; + if (test_bit(TRIGGER_NETDEV_HALF_DUPLEX, &rules)) + *offload_trigger |= QCA807X_LED_FIBER_HDX_ON_EN; + if (test_bit(TRIGGER_NETDEV_FULL_DUPLEX, &rules)) + *offload_trigger |= QCA807X_LED_FIBER_FDX_ON_EN; + break; + default: + return -EOPNOTSUPP; + } + + if (rules && !*offload_trigger) + return -EOPNOTSUPP; + + return 0; +} + +static int qca807x_led_hw_control_enable(struct phy_device *phydev, u8 index) +{ + u16 reg; + + if (index > 1) + return -EINVAL; + + reg = QCA807X_MMD7_LED_FORCE_CTRL(index); + return qca808x_led_reg_hw_control_enable(phydev, reg); +} + +static int qca807x_led_hw_is_supported(struct phy_device *phydev, u8 index, + unsigned long rules) +{ + u16 offload_trigger = 0; + + if (index > 1) + return -EINVAL; + + return qca807x_led_parse_netdev(phydev, rules, &offload_trigger); +} + +static int qca807x_led_hw_control_set(struct phy_device *phydev, u8 index, + unsigned long rules) +{ + u16 reg, mask, offload_trigger = 0; + int ret; + + if (index > 1) + return -EINVAL; + + ret = qca807x_led_parse_netdev(phydev, rules, &offload_trigger); + if (ret) + return ret; + + ret = qca807x_led_hw_control_enable(phydev, index); + if (ret) + return ret; + + switch (phydev->port) { + case PORT_TP: + reg = QCA807X_MMD7_LED_CTRL(index); + mask = QCA808X_LED_PATTERN_MASK; + break; + case PORT_FIBRE: + /* HW control pattern bits are in LED FORCE reg */ + reg = QCA807X_MMD7_LED_FORCE_CTRL(index); + mask = QCA807X_LED_FIBER_PATTERN_MASK; + break; + default: + return -EINVAL; + } + + return phy_modify_mmd(phydev, MDIO_MMD_AN, reg, mask, + offload_trigger); +} + +static bool qca807x_led_hw_control_status(struct phy_device *phydev, u8 index) +{ + u16 reg; + + if (index > 1) + return false; + + reg = QCA807X_MMD7_LED_FORCE_CTRL(index); + return qca808x_led_reg_hw_control_status(phydev, reg); +} + +static int qca807x_led_hw_control_get(struct phy_device *phydev, u8 index, + unsigned long *rules) +{ + u16 reg; + int val; + + if (index > 1) + return -EINVAL; + + /* Check if we have hw control enabled */ + if (qca807x_led_hw_control_status(phydev, index)) + return -EINVAL; + + /* Parsing specific to netdev trigger */ + switch (phydev->port) { + case PORT_TP: + reg = QCA807X_MMD7_LED_CTRL(index); + val = phy_read_mmd(phydev, MDIO_MMD_AN, reg); + if (val & QCA808X_LED_TX_BLINK) + set_bit(TRIGGER_NETDEV_TX, rules); + if (val & QCA808X_LED_RX_BLINK) + set_bit(TRIGGER_NETDEV_RX, rules); + if (val & QCA808X_LED_SPEED10_ON) + set_bit(TRIGGER_NETDEV_LINK_10, rules); + if (val & QCA808X_LED_SPEED100_ON) + set_bit(TRIGGER_NETDEV_LINK_100, rules); + if (val & QCA808X_LED_SPEED1000_ON) + set_bit(TRIGGER_NETDEV_LINK_1000, rules); + if (val & QCA808X_LED_HALF_DUPLEX_ON) + set_bit(TRIGGER_NETDEV_HALF_DUPLEX, rules); + if (val & QCA808X_LED_FULL_DUPLEX_ON) + set_bit(TRIGGER_NETDEV_FULL_DUPLEX, rules); + break; + case PORT_FIBRE: + /* HW control pattern bits are in LED FORCE reg */ + reg = QCA807X_MMD7_LED_FORCE_CTRL(index); + val = phy_read_mmd(phydev, MDIO_MMD_AN, reg); + if (val & QCA807X_LED_FIBER_TXACT_BLK_EN) + set_bit(TRIGGER_NETDEV_TX, rules); + if (val & QCA807X_LED_FIBER_RXACT_BLK_EN) + set_bit(TRIGGER_NETDEV_RX, rules); + if (val & QCA807X_LED_FIBER_100FX_ON_EN) + set_bit(TRIGGER_NETDEV_LINK_100, rules); + if (val & QCA807X_LED_FIBER_1000BX_ON_EN) + set_bit(TRIGGER_NETDEV_LINK_1000, rules); + if (val & QCA807X_LED_FIBER_HDX_ON_EN) + set_bit(TRIGGER_NETDEV_HALF_DUPLEX, rules); + if (val & QCA807X_LED_FIBER_FDX_ON_EN) + set_bit(TRIGGER_NETDEV_FULL_DUPLEX, rules); + break; + default: + return -EINVAL; + } + + return 0; +} + +static int qca807x_led_hw_control_reset(struct phy_device *phydev, u8 index) +{ + u16 reg, mask; + + if (index > 1) + return -EINVAL; + + switch (phydev->port) { + case PORT_TP: + reg = QCA807X_MMD7_LED_CTRL(index); + mask = QCA808X_LED_PATTERN_MASK; + break; + case PORT_FIBRE: + /* HW control pattern bits are in LED FORCE reg */ + reg = QCA807X_MMD7_LED_FORCE_CTRL(index); + mask = QCA807X_LED_FIBER_PATTERN_MASK; + break; + default: + return -EINVAL; + } + + return phy_clear_bits_mmd(phydev, MDIO_MMD_AN, reg, mask); +} + +static int qca807x_led_brightness_set(struct phy_device *phydev, + u8 index, enum led_brightness value) +{ + u16 reg; + int ret; + + if (index > 1) + return -EINVAL; + + /* If we are setting off the LED reset any hw control rule */ + if (!value) { + ret = qca807x_led_hw_control_reset(phydev, index); + if (ret) + return ret; + } + + reg = QCA807X_MMD7_LED_FORCE_CTRL(index); + return qca808x_led_reg_brightness_set(phydev, reg, value); +} + +static int qca807x_led_blink_set(struct phy_device *phydev, u8 index, + unsigned long *delay_on, + unsigned long *delay_off) +{ + u16 reg; + + if (index > 1) + return -EINVAL; + + reg = QCA807X_MMD7_LED_FORCE_CTRL(index); + return qca808x_led_reg_blink_set(phydev, reg, delay_on, delay_off); +} + #ifdef CONFIG_GPIOLIB static int qca807x_gpio_get_direction(struct gpio_chip *gc, unsigned int offset) { @@ -496,6 +733,16 @@ static int qca807x_probe(struct phy_device *phydev) "qcom,dac-disable-bias-current-tweak"); if (IS_ENABLED(CONFIG_GPIOLIB)) { + /* Make sure we don't have mixed leds node and gpio-controller + * to prevent registering leds and having gpio-controller usage + * conflicting with them. + */ + if (of_find_property(node, "leds", NULL) && + of_find_property(node, "gpio-controller", NULL)) { + phydev_err(phydev, "Invalid property detected. LEDs and gpio-controller are mutually exclusive."); + return -EINVAL; + } + /* Do not register a GPIO controller unless flagged for it */ if (of_property_read_bool(node, "gpio-controller")) { ret = qca807x_gpio(phydev); @@ -580,6 +827,11 @@ static struct phy_driver qca807x_drivers[] = { .suspend = genphy_suspend, .cable_test_start = qca807x_cable_test_start, .cable_test_get_status = qca808x_cable_test_get_status, + .led_brightness_set = qca807x_led_brightness_set, + .led_blink_set = qca807x_led_blink_set, + .led_hw_is_supported = qca807x_led_hw_is_supported, + .led_hw_control_set = qca807x_led_hw_control_set, + .led_hw_control_get = qca807x_led_hw_control_get, }, }; module_phy_driver(qca807x_drivers);