diff mbox series

[v2,2/5] PCI: dwc: Skip finding eDMA channels count if glue drivers have passed them

Message ID 20240216-dw-hdma-v2-2-b42329003f43@linaro.org (mailing list archive)
State Superseded
Headers show
Series PCI: dwc: Add support for integrating HDMA with DWC EP driver | expand

Commit Message

Manivannan Sadhasivam Feb. 16, 2024, 5:34 p.m. UTC
In the case of Hyper DMA (HDMA) present in DWC controllers, there is no way
the drivers can auto detect the number of read/write channels as like its
predecessor embedded DMA (eDMA). So the glue drivers making use of HDMA
have to pass the channels count during probe.

To accommodate that, let's skip finding the channels if the channels count
were already passed by glue drivers. If the channels count passed were
wrong in any form, then the existing sanity check will catch it.

Suggested-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 drivers/pci/controller/dwc/pcie-designware.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

Comments

s-vadapalli Feb. 20, 2024, 12:16 p.m. UTC | #1
On 24/02/16 11:04PM, Manivannan Sadhasivam wrote:
> In the case of Hyper DMA (HDMA) present in DWC controllers, there is no way
> the drivers can auto detect the number of read/write channels as like its
> predecessor embedded DMA (eDMA). So the glue drivers making use of HDMA
> have to pass the channels count during probe.
> 
> To accommodate that, let's skip finding the channels if the channels count
> were already passed by glue drivers. If the channels count passed were
> wrong in any form, then the existing sanity check will catch it.
> 
> Suggested-by: Serge Semin <fancer.lancer@gmail.com>
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>

Regards,
Siddharth.
> ---
>  drivers/pci/controller/dwc/pcie-designware.c | 16 +++++++++-------
>  1 file changed, 9 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
> index 3a26dfc5368f..d07747b75947 100644
> --- a/drivers/pci/controller/dwc/pcie-designware.c
> +++ b/drivers/pci/controller/dwc/pcie-designware.c
> @@ -927,13 +927,15 @@ static int dw_pcie_edma_find_channels(struct dw_pcie *pci)
>  {
>  	u32 val;
>  
> -	if (pci->edma.mf == EDMA_MF_EDMA_LEGACY)
> -		val = dw_pcie_readl_dbi(pci, PCIE_DMA_VIEWPORT_BASE + PCIE_DMA_CTRL);
> -	else
> -		val = dw_pcie_readl_dma(pci, PCIE_DMA_CTRL);
> -
> -	pci->edma.ll_wr_cnt = FIELD_GET(PCIE_DMA_NUM_WR_CHAN, val);
> -	pci->edma.ll_rd_cnt = FIELD_GET(PCIE_DMA_NUM_RD_CHAN, val);
> +	if (!pci->edma.ll_wr_cnt || !pci->edma.ll_rd_cnt) {
> +		if (pci->edma.mf == EDMA_MF_EDMA_LEGACY)
> +			val = dw_pcie_readl_dbi(pci, PCIE_DMA_VIEWPORT_BASE + PCIE_DMA_CTRL);
> +		else
> +			val = dw_pcie_readl_dma(pci, PCIE_DMA_CTRL);
> +
> +		pci->edma.ll_wr_cnt = FIELD_GET(PCIE_DMA_NUM_WR_CHAN, val);
> +		pci->edma.ll_rd_cnt = FIELD_GET(PCIE_DMA_NUM_RD_CHAN, val);
> +	}
>  
>  	/* Sanity check the channels count if the mapping was incorrect */
>  	if (!pci->edma.ll_wr_cnt || pci->edma.ll_wr_cnt > EDMA_MAX_WR_CH ||
> 
> -- 
> 2.25.1
> 
>
diff mbox series

Patch

diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
index 3a26dfc5368f..d07747b75947 100644
--- a/drivers/pci/controller/dwc/pcie-designware.c
+++ b/drivers/pci/controller/dwc/pcie-designware.c
@@ -927,13 +927,15 @@  static int dw_pcie_edma_find_channels(struct dw_pcie *pci)
 {
 	u32 val;
 
-	if (pci->edma.mf == EDMA_MF_EDMA_LEGACY)
-		val = dw_pcie_readl_dbi(pci, PCIE_DMA_VIEWPORT_BASE + PCIE_DMA_CTRL);
-	else
-		val = dw_pcie_readl_dma(pci, PCIE_DMA_CTRL);
-
-	pci->edma.ll_wr_cnt = FIELD_GET(PCIE_DMA_NUM_WR_CHAN, val);
-	pci->edma.ll_rd_cnt = FIELD_GET(PCIE_DMA_NUM_RD_CHAN, val);
+	if (!pci->edma.ll_wr_cnt || !pci->edma.ll_rd_cnt) {
+		if (pci->edma.mf == EDMA_MF_EDMA_LEGACY)
+			val = dw_pcie_readl_dbi(pci, PCIE_DMA_VIEWPORT_BASE + PCIE_DMA_CTRL);
+		else
+			val = dw_pcie_readl_dma(pci, PCIE_DMA_CTRL);
+
+		pci->edma.ll_wr_cnt = FIELD_GET(PCIE_DMA_NUM_WR_CHAN, val);
+		pci->edma.ll_rd_cnt = FIELD_GET(PCIE_DMA_NUM_RD_CHAN, val);
+	}
 
 	/* Sanity check the channels count if the mapping was incorrect */
 	if (!pci->edma.ll_wr_cnt || pci->edma.ll_wr_cnt > EDMA_MAX_WR_CH ||