diff mbox series

[14/21] arm64: dts: qcom: msm8996: Add PCIe bridge node

Message ID 20240221-pcie-qcom-bridge-dts-v1-14-6c6df0f9450d@linaro.org (mailing list archive)
State Superseded
Headers show
Series Add PCIe bridge node in DT for Qcom SoCs | expand

Commit Message

Manivannan Sadhasivam Feb. 21, 2024, 3:42 a.m. UTC 
On Qcom SoCs, the PCIe host bridge is connected to a single PCIe bridge
for each controller instance. Hence, add a node to represent the bridge.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 arch/arm64/boot/dts/qcom/msm8996.dtsi | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 8d41ed261adf..cd28b368ebb6 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -1956,6 +1956,16 @@  pcie0: pcie@600000 {
 						"cfg",
 						"bus_master",
 						"bus_slave";
+
+				pcie@0 {
+					device_type = "pci";
+					reg = <0x0 0x0 0x0 0x0 0x0>;
+					bus-range = <0x01 0xff>;
+
+					#address-cells = <3>;
+					#size-cells = <2>;
+					ranges;
+				};
 			};
 
 			pcie1: pcie@608000 {
@@ -2009,6 +2019,16 @@  pcie1: pcie@608000 {
 						"cfg",
 						"bus_master",
 						"bus_slave";
+
+				pcie@0 {
+					device_type = "pci";
+					reg = <0x0 0x0 0x0 0x0 0x0>;
+					bus-range = <0x01 0xff>;
+
+					#address-cells = <3>;
+					#size-cells = <2>;
+					ranges;
+				};
 			};
 
 			pcie2: pcie@610000 {
@@ -2059,6 +2079,16 @@  pcie2: pcie@610000 {
 						"cfg",
 						"bus_master",
 						"bus_slave";
+
+				pcie@0 {
+					device_type = "pci";
+					reg = <0x0 0x0 0x0 0x0 0x0>;
+					bus-range = <0x01 0xff>;
+
+					#address-cells = <3>;
+					#size-cells = <2>;
+					ranges;
+				};
 			};
 		};