diff mbox series

[v2,08/21] arm64: dts: qcom: sa8775p: Add PCIe bridge node

Message ID 20240321-pcie-qcom-bridge-dts-v2-8-1eb790c53e43@linaro.org (mailing list archive)
State Accepted
Commit 3c3abb944d3ecce10738c73c94b300974da7b81b
Headers show
Series Add PCIe bridge node in DT for Qcom SoCs | expand

Commit Message

Manivannan Sadhasivam March 21, 2024, 11:16 a.m. UTC 
On Qcom SoCs, the PCIe host bridge is connected to a single PCIe bridge
for each controller instance. Hence, add a node to represent the bridge.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 arch/arm64/boot/dts/qcom/sa8775p.dtsi | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
index 231cea1f0fa8..31de73594839 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
@@ -3677,6 +3677,16 @@  pcie0: pcie@1c00000 {
 		phy-names = "pciephy";
 
 		status = "disabled";
+
+		pcie@0 {
+			device_type = "pci";
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			bus-range = <0x01 0xff>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+		};
 	};
 
 	pcie0_phy: phy@1c04000 {
@@ -3777,6 +3787,16 @@  pcie1: pcie@1c10000 {
 		phy-names = "pciephy";
 
 		status = "disabled";
+
+		pcie@0 {
+			device_type = "pci";
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			bus-range = <0x01 0xff>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+		};
 	};
 
 	pcie1_phy: phy@1c14000 {