| Message ID | 20240321092529.13362-2-quic_jkona@quicinc.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add support for videocc and camcc on SM8650 | expand |
On Thu, 21 Mar 2024 at 11:26, Jagadeesh Kona <quic_jkona@quicinc.com> wrote: > > Extend device tree bindings of SM8450 videocc to add support > for SM8650 videocc. While it at, fix the incorrect header > include in sm8450 videocc yaml documentation. > > Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com> > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > --- > .../devicetree/bindings/clock/qcom,sm8450-videocc.yaml | 4 +++- > include/dt-bindings/clock/qcom,sm8450-videocc.h | 8 +++++++- > 2 files changed, 10 insertions(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml > index bad8f019a8d3..79f55620eb70 100644 > --- a/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml > +++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml > @@ -8,18 +8,20 @@ title: Qualcomm Video Clock & Reset Controller on SM8450 > > maintainers: > - Taniya Das <quic_tdas@quicinc.com> > + - Jagadeesh Kona <quic_jkona@quicinc.com> > > description: | > Qualcomm video clock control module provides the clocks, resets and power > domains on SM8450. > > - See also:: include/dt-bindings/clock/qcom,videocc-sm8450.h > + See also:: include/dt-bindings/clock/qcom,sm8450-videocc.h This almost pleads to go to a separate patch. Fixes generally should be separated from the rest of the changes. > > properties: > compatible: > enum: > - qcom,sm8450-videocc > - qcom,sm8550-videocc > + - qcom,sm8650-videocc > > reg: > maxItems: 1 > diff --git a/include/dt-bindings/clock/qcom,sm8450-videocc.h b/include/dt-bindings/clock/qcom,sm8450-videocc.h > index 9d795adfe4eb..ecfebe52e4bb 100644 > --- a/include/dt-bindings/clock/qcom,sm8450-videocc.h > +++ b/include/dt-bindings/clock/qcom,sm8450-videocc.h > @@ -1,6 +1,6 @@ > /* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ > /* > - * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved. > + * Copyright (c) 2023-2024, Qualcomm Innovation Center, Inc. All rights reserved. > */ > > #ifndef _DT_BINDINGS_CLK_QCOM_VIDEO_CC_SM8450_H > @@ -19,6 +19,11 @@ > #define VIDEO_CC_MVS1C_DIV2_DIV_CLK_SRC 9 > #define VIDEO_CC_PLL0 10 > #define VIDEO_CC_PLL1 11 > +#define VIDEO_CC_MVS0_SHIFT_CLK 12 > +#define VIDEO_CC_MVS0C_SHIFT_CLK 13 > +#define VIDEO_CC_MVS1_SHIFT_CLK 14 > +#define VIDEO_CC_MVS1C_SHIFT_CLK 15 > +#define VIDEO_CC_XO_CLK_SRC 16 Are these values applicable to sm8450? > > /* VIDEO_CC power domains */ > #define VIDEO_CC_MVS0C_GDSC 0 > @@ -34,5 +39,6 @@ > #define CVP_VIDEO_CC_MVS1C_BCR 4 > #define VIDEO_CC_MVS0C_CLK_ARES 5 > #define VIDEO_CC_MVS1C_CLK_ARES 6 > +#define VIDEO_CC_XO_CLK_ARES 7 > > #endif > -- > 2.43.0 > >
On 3/21/2024 6:42 PM, Dmitry Baryshkov wrote: > On Thu, 21 Mar 2024 at 11:26, Jagadeesh Kona <quic_jkona@quicinc.com> wrote: >> >> Extend device tree bindings of SM8450 videocc to add support >> for SM8650 videocc. While it at, fix the incorrect header >> include in sm8450 videocc yaml documentation. >> >> Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com> >> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> >> --- >> .../devicetree/bindings/clock/qcom,sm8450-videocc.yaml | 4 +++- >> include/dt-bindings/clock/qcom,sm8450-videocc.h | 8 +++++++- >> 2 files changed, 10 insertions(+), 2 deletions(-) >> >> diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml >> index bad8f019a8d3..79f55620eb70 100644 >> --- a/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml >> +++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml >> @@ -8,18 +8,20 @@ title: Qualcomm Video Clock & Reset Controller on SM8450 >> >> maintainers: >> - Taniya Das <quic_tdas@quicinc.com> >> + - Jagadeesh Kona <quic_jkona@quicinc.com> >> >> description: | >> Qualcomm video clock control module provides the clocks, resets and power >> domains on SM8450. >> >> - See also:: include/dt-bindings/clock/qcom,videocc-sm8450.h >> + See also:: include/dt-bindings/clock/qcom,sm8450-videocc.h > > This almost pleads to go to a separate patch. Fixes generally should > be separated from the rest of the changes. > Thanks Dmitry for your review. Sure, will separate this into a separate patch in next series. >> >> properties: >> compatible: >> enum: >> - qcom,sm8450-videocc >> - qcom,sm8550-videocc >> + - qcom,sm8650-videocc >> >> reg: >> maxItems: 1 >> diff --git a/include/dt-bindings/clock/qcom,sm8450-videocc.h b/include/dt-bindings/clock/qcom,sm8450-videocc.h >> index 9d795adfe4eb..ecfebe52e4bb 100644 >> --- a/include/dt-bindings/clock/qcom,sm8450-videocc.h >> +++ b/include/dt-bindings/clock/qcom,sm8450-videocc.h >> @@ -1,6 +1,6 @@ >> /* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ >> /* >> - * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved. >> + * Copyright (c) 2023-2024, Qualcomm Innovation Center, Inc. All rights reserved. >> */ >> >> #ifndef _DT_BINDINGS_CLK_QCOM_VIDEO_CC_SM8450_H >> @@ -19,6 +19,11 @@ >> #define VIDEO_CC_MVS1C_DIV2_DIV_CLK_SRC 9 >> #define VIDEO_CC_PLL0 10 >> #define VIDEO_CC_PLL1 11 >> +#define VIDEO_CC_MVS0_SHIFT_CLK 12 >> +#define VIDEO_CC_MVS0C_SHIFT_CLK 13 >> +#define VIDEO_CC_MVS1_SHIFT_CLK 14 >> +#define VIDEO_CC_MVS1C_SHIFT_CLK 15 >> +#define VIDEO_CC_XO_CLK_SRC 16 > > Are these values applicable to sm8450? > No, the shift clocks above are part of SM8650 only. To reuse the existing SM8550 videocc driver for SM8650 and to register these shift clocks for SM8650, I added them here. Thanks, Jagadeesh >> >> /* VIDEO_CC power domains */ >> #define VIDEO_CC_MVS0C_GDSC 0 >> @@ -34,5 +39,6 @@ >> #define CVP_VIDEO_CC_MVS1C_BCR 4 >> #define VIDEO_CC_MVS0C_CLK_ARES 5 >> #define VIDEO_CC_MVS1C_CLK_ARES 6 >> +#define VIDEO_CC_XO_CLK_ARES 7 >> >> #endif >> -- >> 2.43.0 >> >> > >
On Mon, 25 Mar 2024 at 08:08, Jagadeesh Kona <quic_jkona@quicinc.com> wrote: > > > > On 3/21/2024 6:42 PM, Dmitry Baryshkov wrote: > > On Thu, 21 Mar 2024 at 11:26, Jagadeesh Kona <quic_jkona@quicinc.com> wrote: > >> > >> Extend device tree bindings of SM8450 videocc to add support > >> for SM8650 videocc. While it at, fix the incorrect header > >> include in sm8450 videocc yaml documentation. > >> > >> Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com> > >> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > >> --- > >> .../devicetree/bindings/clock/qcom,sm8450-videocc.yaml | 4 +++- > >> include/dt-bindings/clock/qcom,sm8450-videocc.h | 8 +++++++- > >> 2 files changed, 10 insertions(+), 2 deletions(-) > >> > >> diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml > >> index bad8f019a8d3..79f55620eb70 100644 > >> --- a/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml > >> +++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml > >> @@ -8,18 +8,20 @@ title: Qualcomm Video Clock & Reset Controller on SM8450 > >> > >> maintainers: > >> - Taniya Das <quic_tdas@quicinc.com> > >> + - Jagadeesh Kona <quic_jkona@quicinc.com> > >> > >> description: | > >> Qualcomm video clock control module provides the clocks, resets and power > >> domains on SM8450. > >> > >> - See also:: include/dt-bindings/clock/qcom,videocc-sm8450.h > >> + See also:: include/dt-bindings/clock/qcom,sm8450-videocc.h > > > > This almost pleads to go to a separate patch. Fixes generally should > > be separated from the rest of the changes. > > > > Thanks Dmitry for your review. > > Sure, will separate this into a separate patch in next series. > > >> > >> properties: > >> compatible: > >> enum: > >> - qcom,sm8450-videocc > >> - qcom,sm8550-videocc > >> + - qcom,sm8650-videocc > >> > >> reg: > >> maxItems: 1 > >> diff --git a/include/dt-bindings/clock/qcom,sm8450-videocc.h b/include/dt-bindings/clock/qcom,sm8450-videocc.h > >> index 9d795adfe4eb..ecfebe52e4bb 100644 > >> --- a/include/dt-bindings/clock/qcom,sm8450-videocc.h > >> +++ b/include/dt-bindings/clock/qcom,sm8450-videocc.h > >> @@ -1,6 +1,6 @@ > >> /* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ > >> /* > >> - * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved. > >> + * Copyright (c) 2023-2024, Qualcomm Innovation Center, Inc. All rights reserved. > >> */ > >> > >> #ifndef _DT_BINDINGS_CLK_QCOM_VIDEO_CC_SM8450_H > >> @@ -19,6 +19,11 @@ > >> #define VIDEO_CC_MVS1C_DIV2_DIV_CLK_SRC 9 > >> #define VIDEO_CC_PLL0 10 > >> #define VIDEO_CC_PLL1 11 > >> +#define VIDEO_CC_MVS0_SHIFT_CLK 12 > >> +#define VIDEO_CC_MVS0C_SHIFT_CLK 13 > >> +#define VIDEO_CC_MVS1_SHIFT_CLK 14 > >> +#define VIDEO_CC_MVS1C_SHIFT_CLK 15 > >> +#define VIDEO_CC_XO_CLK_SRC 16 > > > > Are these values applicable to sm8450? > > > > No, the shift clocks above are part of SM8650 only. To reuse the > existing SM8550 videocc driver for SM8650 and to register these shift > clocks for SM8650, I added them here. At least it deserves a comment. > > Thanks, > Jagadeesh > > >> > >> /* VIDEO_CC power domains */ > >> #define VIDEO_CC_MVS0C_GDSC 0 > >> @@ -34,5 +39,6 @@ > >> #define CVP_VIDEO_CC_MVS1C_BCR 4 > >> #define VIDEO_CC_MVS0C_CLK_ARES 5 > >> #define VIDEO_CC_MVS1C_CLK_ARES 6 > >> +#define VIDEO_CC_XO_CLK_ARES 7 > >> > >> #endif > >> -- > >> 2.43.0 > >> > >> > > > >
On 3/25/2024 12:08 PM, Dmitry Baryshkov wrote: > On Mon, 25 Mar 2024 at 08:08, Jagadeesh Kona <quic_jkona@quicinc.com> wrote: >> >> >> >> On 3/21/2024 6:42 PM, Dmitry Baryshkov wrote: >>> On Thu, 21 Mar 2024 at 11:26, Jagadeesh Kona <quic_jkona@quicinc.com> wrote: >>>> >>>> Extend device tree bindings of SM8450 videocc to add support >>>> for SM8650 videocc. While it at, fix the incorrect header >>>> include in sm8450 videocc yaml documentation. >>>> >>>> Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com> >>>> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> >>>> --- >>>> .../devicetree/bindings/clock/qcom,sm8450-videocc.yaml | 4 +++- >>>> include/dt-bindings/clock/qcom,sm8450-videocc.h | 8 +++++++- >>>> 2 files changed, 10 insertions(+), 2 deletions(-) >>>> >>>> diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml >>>> index bad8f019a8d3..79f55620eb70 100644 >>>> --- a/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml >>>> +++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml >>>> @@ -8,18 +8,20 @@ title: Qualcomm Video Clock & Reset Controller on SM8450 >>>> >>>> maintainers: >>>> - Taniya Das <quic_tdas@quicinc.com> >>>> + - Jagadeesh Kona <quic_jkona@quicinc.com> >>>> >>>> description: | >>>> Qualcomm video clock control module provides the clocks, resets and power >>>> domains on SM8450. >>>> >>>> - See also:: include/dt-bindings/clock/qcom,videocc-sm8450.h >>>> + See also:: include/dt-bindings/clock/qcom,sm8450-videocc.h >>> >>> This almost pleads to go to a separate patch. Fixes generally should >>> be separated from the rest of the changes. >>> >> >> Thanks Dmitry for your review. >> >> Sure, will separate this into a separate patch in next series. >> >>>> >>>> properties: >>>> compatible: >>>> enum: >>>> - qcom,sm8450-videocc >>>> - qcom,sm8550-videocc >>>> + - qcom,sm8650-videocc >>>> >>>> reg: >>>> maxItems: 1 >>>> diff --git a/include/dt-bindings/clock/qcom,sm8450-videocc.h b/include/dt-bindings/clock/qcom,sm8450-videocc.h >>>> index 9d795adfe4eb..ecfebe52e4bb 100644 >>>> --- a/include/dt-bindings/clock/qcom,sm8450-videocc.h >>>> +++ b/include/dt-bindings/clock/qcom,sm8450-videocc.h >>>> @@ -1,6 +1,6 @@ >>>> /* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ >>>> /* >>>> - * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved. >>>> + * Copyright (c) 2023-2024, Qualcomm Innovation Center, Inc. All rights reserved. >>>> */ >>>> >>>> #ifndef _DT_BINDINGS_CLK_QCOM_VIDEO_CC_SM8450_H >>>> @@ -19,6 +19,11 @@ >>>> #define VIDEO_CC_MVS1C_DIV2_DIV_CLK_SRC 9 >>>> #define VIDEO_CC_PLL0 10 >>>> #define VIDEO_CC_PLL1 11 >>>> +#define VIDEO_CC_MVS0_SHIFT_CLK 12 >>>> +#define VIDEO_CC_MVS0C_SHIFT_CLK 13 >>>> +#define VIDEO_CC_MVS1_SHIFT_CLK 14 >>>> +#define VIDEO_CC_MVS1C_SHIFT_CLK 15 >>>> +#define VIDEO_CC_XO_CLK_SRC 16 >>> >>> Are these values applicable to sm8450? >>> >> >> No, the shift clocks above are part of SM8650 only. To reuse the >> existing SM8550 videocc driver for SM8650 and to register these shift >> clocks for SM8650, I added them here. > > At least it deserves a comment. > Yes, will add the comment in next series. Thanks, Jagadeesh >> >>>> >>>> /* VIDEO_CC power domains */ >>>> #define VIDEO_CC_MVS0C_GDSC 0 >>>> @@ -34,5 +39,6 @@ >>>> #define CVP_VIDEO_CC_MVS1C_BCR 4 >>>> #define VIDEO_CC_MVS0C_CLK_ARES 5 >>>> #define VIDEO_CC_MVS1C_CLK_ARES 6 >>>> +#define VIDEO_CC_XO_CLK_ARES 7 >>>> >>>> #endif >>>> -- >>>> 2.43.0 >>>> >>>> >>> >>> > > >
Hello Jagadeesh, On 3/25/24 08:07, Jagadeesh Kona wrote: > > > On 3/21/2024 6:42 PM, Dmitry Baryshkov wrote: >> On Thu, 21 Mar 2024 at 11:26, Jagadeesh Kona <quic_jkona@quicinc.com> wrote: >>> >>> Extend device tree bindings of SM8450 videocc to add support >>> for SM8650 videocc. While it at, fix the incorrect header >>> include in sm8450 videocc yaml documentation. >>> >>> Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com> >>> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> >>> --- >>> .../devicetree/bindings/clock/qcom,sm8450-videocc.yaml | 4 +++- >>> include/dt-bindings/clock/qcom,sm8450-videocc.h | 8 +++++++- >>> 2 files changed, 10 insertions(+), 2 deletions(-) >>> >>> diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml >>> index bad8f019a8d3..79f55620eb70 100644 >>> --- a/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml >>> +++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml >>> @@ -8,18 +8,20 @@ title: Qualcomm Video Clock & Reset Controller on SM8450 >>> >>> maintainers: >>> - Taniya Das <quic_tdas@quicinc.com> >>> + - Jagadeesh Kona <quic_jkona@quicinc.com> >>> >>> description: | >>> Qualcomm video clock control module provides the clocks, resets and power >>> domains on SM8450. >>> >>> - See also:: include/dt-bindings/clock/qcom,videocc-sm8450.h >>> + See also:: include/dt-bindings/clock/qcom,sm8450-videocc.h >> >> This almost pleads to go to a separate patch. Fixes generally should >> be separated from the rest of the changes. >> > > Thanks Dmitry for your review. > > Sure, will separate this into a separate patch in next series. > >>> >>> properties: >>> compatible: >>> enum: >>> - qcom,sm8450-videocc >>> - qcom,sm8550-videocc >>> + - qcom,sm8650-videocc >>> >>> reg: >>> maxItems: 1 >>> diff --git a/include/dt-bindings/clock/qcom,sm8450-videocc.h b/include/dt-bindings/clock/qcom,sm8450-videocc.h >>> index 9d795adfe4eb..ecfebe52e4bb 100644 >>> --- a/include/dt-bindings/clock/qcom,sm8450-videocc.h >>> +++ b/include/dt-bindings/clock/qcom,sm8450-videocc.h >>> @@ -1,6 +1,6 @@ >>> /* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ >>> /* >>> - * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved. >>> + * Copyright (c) 2023-2024, Qualcomm Innovation Center, Inc. All rights reserved. >>> */ >>> >>> #ifndef _DT_BINDINGS_CLK_QCOM_VIDEO_CC_SM8450_H >>> @@ -19,6 +19,11 @@ >>> #define VIDEO_CC_MVS1C_DIV2_DIV_CLK_SRC 9 >>> #define VIDEO_CC_PLL0 10 >>> #define VIDEO_CC_PLL1 11 >>> +#define VIDEO_CC_MVS0_SHIFT_CLK 12 >>> +#define VIDEO_CC_MVS0C_SHIFT_CLK 13 >>> +#define VIDEO_CC_MVS1_SHIFT_CLK 14 >>> +#define VIDEO_CC_MVS1C_SHIFT_CLK 15 >>> +#define VIDEO_CC_XO_CLK_SRC 16 >> >> Are these values applicable to sm8450? >> > > No, the shift clocks above are part of SM8650 only. To reuse the > existing SM8550 videocc driver for SM8650 and to register these shift > clocks for SM8650, I added them here. > In such case I'd strongly suggest to add a new qcom,sm8650-videocc.h file, and do #include qcom,sm8450-videocc.h in it, thus the new header will be really a short one. This will add pristine clarity. -- Best wishes, Vladimir
On 4/19/2024 2:31 AM, Vladimir Zapolskiy wrote: > Hello Jagadeesh, > > On 3/25/24 08:07, Jagadeesh Kona wrote: >> >> >> On 3/21/2024 6:42 PM, Dmitry Baryshkov wrote: >>> On Thu, 21 Mar 2024 at 11:26, Jagadeesh Kona <quic_jkona@quicinc.com> >>> wrote: >>>> >>>> Extend device tree bindings of SM8450 videocc to add support >>>> for SM8650 videocc. While it at, fix the incorrect header >>>> include in sm8450 videocc yaml documentation. >>>> >>>> Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com> >>>> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> >>>> --- >>>> .../devicetree/bindings/clock/qcom,sm8450-videocc.yaml | 4 +++- >>>> include/dt-bindings/clock/qcom,sm8450-videocc.h | 8 >>>> +++++++- >>>> 2 files changed, 10 insertions(+), 2 deletions(-) >>>> >>>> diff --git >>>> a/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml >>>> b/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml >>>> index bad8f019a8d3..79f55620eb70 100644 >>>> --- a/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml >>>> +++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml >>>> @@ -8,18 +8,20 @@ title: Qualcomm Video Clock & Reset Controller on >>>> SM8450 >>>> >>>> maintainers: >>>> - Taniya Das <quic_tdas@quicinc.com> >>>> + - Jagadeesh Kona <quic_jkona@quicinc.com> >>>> >>>> description: | >>>> Qualcomm video clock control module provides the clocks, resets >>>> and power >>>> domains on SM8450. >>>> >>>> - See also:: include/dt-bindings/clock/qcom,videocc-sm8450.h >>>> + See also:: include/dt-bindings/clock/qcom,sm8450-videocc.h >>> >>> This almost pleads to go to a separate patch. Fixes generally should >>> be separated from the rest of the changes. >>> >> >> Thanks Dmitry for your review. >> >> Sure, will separate this into a separate patch in next series. >> >>>> >>>> properties: >>>> compatible: >>>> enum: >>>> - qcom,sm8450-videocc >>>> - qcom,sm8550-videocc >>>> + - qcom,sm8650-videocc >>>> >>>> reg: >>>> maxItems: 1 >>>> diff --git a/include/dt-bindings/clock/qcom,sm8450-videocc.h >>>> b/include/dt-bindings/clock/qcom,sm8450-videocc.h >>>> index 9d795adfe4eb..ecfebe52e4bb 100644 >>>> --- a/include/dt-bindings/clock/qcom,sm8450-videocc.h >>>> +++ b/include/dt-bindings/clock/qcom,sm8450-videocc.h >>>> @@ -1,6 +1,6 @@ >>>> /* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ >>>> /* >>>> - * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights >>>> reserved. >>>> + * Copyright (c) 2023-2024, Qualcomm Innovation Center, Inc. All >>>> rights reserved. >>>> */ >>>> >>>> #ifndef _DT_BINDINGS_CLK_QCOM_VIDEO_CC_SM8450_H >>>> @@ -19,6 +19,11 @@ >>>> #define >>>> VIDEO_CC_MVS1C_DIV2_DIV_CLK_SRC 9 >>>> #define VIDEO_CC_PLL0 10 >>>> #define VIDEO_CC_PLL1 11 >>>> +#define >>>> VIDEO_CC_MVS0_SHIFT_CLK 12 >>>> +#define VIDEO_CC_MVS0C_SHIFT_CLK 13 >>>> +#define >>>> VIDEO_CC_MVS1_SHIFT_CLK 14 >>>> +#define VIDEO_CC_MVS1C_SHIFT_CLK 15 >>>> +#define VIDEO_CC_XO_CLK_SRC 16 >>> >>> Are these values applicable to sm8450? >>> >> >> No, the shift clocks above are part of SM8650 only. To reuse the >> existing SM8550 videocc driver for SM8650 and to register these shift >> clocks for SM8650, I added them here. >> > > In such case I'd strongly suggest to add a new qcom,sm8650-videocc.h file, > and do #include qcom,sm8450-videocc.h in it, thus the new header will be > really a short one. > > This will add pristine clarity. > Thanks Vladimir for your suggestion. I believe adding a comment for these set of clocks should be sufficient to indicate these clocks are applicable only for SM8650, I can add the required comment and post the next series. Please let me know if this works? Thanks, Jagadeesh
Hi Jagadeesh, On 4/22/24 14:00, Jagadeesh Kona wrote: > > On 4/19/2024 2:31 AM, Vladimir Zapolskiy wrote: >> Hello Jagadeesh, >> >> On 3/25/24 08:07, Jagadeesh Kona wrote: >>> >>> >>> On 3/21/2024 6:42 PM, Dmitry Baryshkov wrote: >>>> On Thu, 21 Mar 2024 at 11:26, Jagadeesh Kona <quic_jkona@quicinc.com> >>>> wrote: >>>>> >>>>> Extend device tree bindings of SM8450 videocc to add support >>>>> for SM8650 videocc. While it at, fix the incorrect header >>>>> include in sm8450 videocc yaml documentation. >>>>> >>>>> Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com> >>>>> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> >>>>> --- >>>>> .../devicetree/bindings/clock/qcom,sm8450-videocc.yaml | 4 +++- >>>>> include/dt-bindings/clock/qcom,sm8450-videocc.h | 8 >>>>> +++++++- >>>>> 2 files changed, 10 insertions(+), 2 deletions(-) >>>>> >>>>> diff --git >>>>> a/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml >>>>> b/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml >>>>> index bad8f019a8d3..79f55620eb70 100644 >>>>> --- a/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml >>>>> +++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml >>>>> @@ -8,18 +8,20 @@ title: Qualcomm Video Clock & Reset Controller on >>>>> SM8450 >>>>> >>>>> maintainers: >>>>> - Taniya Das <quic_tdas@quicinc.com> >>>>> + - Jagadeesh Kona <quic_jkona@quicinc.com> >>>>> >>>>> description: | >>>>> Qualcomm video clock control module provides the clocks, resets >>>>> and power >>>>> domains on SM8450. >>>>> >>>>> - See also:: include/dt-bindings/clock/qcom,videocc-sm8450.h >>>>> + See also:: include/dt-bindings/clock/qcom,sm8450-videocc.h >>>> >>>> This almost pleads to go to a separate patch. Fixes generally should >>>> be separated from the rest of the changes. >>>> >>> >>> Thanks Dmitry for your review. >>> >>> Sure, will separate this into a separate patch in next series. >>> >>>>> >>>>> properties: >>>>> compatible: >>>>> enum: >>>>> - qcom,sm8450-videocc >>>>> - qcom,sm8550-videocc >>>>> + - qcom,sm8650-videocc >>>>> >>>>> reg: >>>>> maxItems: 1 >>>>> diff --git a/include/dt-bindings/clock/qcom,sm8450-videocc.h >>>>> b/include/dt-bindings/clock/qcom,sm8450-videocc.h >>>>> index 9d795adfe4eb..ecfebe52e4bb 100644 >>>>> --- a/include/dt-bindings/clock/qcom,sm8450-videocc.h >>>>> +++ b/include/dt-bindings/clock/qcom,sm8450-videocc.h >>>>> @@ -1,6 +1,6 @@ >>>>> /* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ >>>>> /* >>>>> - * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights >>>>> reserved. >>>>> + * Copyright (c) 2023-2024, Qualcomm Innovation Center, Inc. All >>>>> rights reserved. >>>>> */ >>>>> >>>>> #ifndef _DT_BINDINGS_CLK_QCOM_VIDEO_CC_SM8450_H >>>>> @@ -19,6 +19,11 @@ >>>>> #define >>>>> VIDEO_CC_MVS1C_DIV2_DIV_CLK_SRC 9 >>>>> #define VIDEO_CC_PLL0 10 >>>>> #define VIDEO_CC_PLL1 11 >>>>> +#define >>>>> VIDEO_CC_MVS0_SHIFT_CLK 12 >>>>> +#define VIDEO_CC_MVS0C_SHIFT_CLK 13 >>>>> +#define >>>>> VIDEO_CC_MVS1_SHIFT_CLK 14 >>>>> +#define VIDEO_CC_MVS1C_SHIFT_CLK 15 >>>>> +#define VIDEO_CC_XO_CLK_SRC 16 >>>> >>>> Are these values applicable to sm8450? >>>> >>> >>> No, the shift clocks above are part of SM8650 only. To reuse the >>> existing SM8550 videocc driver for SM8650 and to register these shift >>> clocks for SM8650, I added them here. >>> >> >> In such case I'd strongly suggest to add a new qcom,sm8650-videocc.h file, >> and do #include qcom,sm8450-videocc.h in it, thus the new header will be >> really a short one. >> >> This will add pristine clarity. >> > > Thanks Vladimir for your suggestion. I believe adding a comment for > these set of clocks should be sufficient to indicate these clocks are > applicable only for SM8650, I can add the required comment and post the > next series. Please let me know if this works? Well, I didn't get any new information to abandon my suggestion, what is wrong with it or why is it less preferable? Even if you add a comment in the header file, it means that for SM8450 platforms you'll begin to define inapplicable/unrelated macro for the platform, which opens a small risk of the misusage, and which can be easily avoided. I believe that the clarity is better for maintenance. -- Best wishes, Vladimir
On 4/25/2024 7:02 PM, Vladimir Zapolskiy wrote: > Hi Jagadeesh, > > On 4/22/24 14:00, Jagadeesh Kona wrote: >> >> On 4/19/2024 2:31 AM, Vladimir Zapolskiy wrote: >>> Hello Jagadeesh, >>> >>> On 3/25/24 08:07, Jagadeesh Kona wrote: >>>> >>>> >>>> On 3/21/2024 6:42 PM, Dmitry Baryshkov wrote: >>>>> On Thu, 21 Mar 2024 at 11:26, Jagadeesh Kona <quic_jkona@quicinc.com> >>>>> wrote: >>>>>> >>>>>> Extend device tree bindings of SM8450 videocc to add support >>>>>> for SM8650 videocc. While it at, fix the incorrect header >>>>>> include in sm8450 videocc yaml documentation. >>>>>> >>>>>> Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com> >>>>>> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> >>>>>> --- >>>>>> .../devicetree/bindings/clock/qcom,sm8450-videocc.yaml | 4 >>>>>> +++- >>>>>> include/dt-bindings/clock/qcom,sm8450-videocc.h | 8 >>>>>> +++++++- >>>>>> 2 files changed, 10 insertions(+), 2 deletions(-) >>>>>> >>>>>> diff --git >>>>>> a/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml >>>>>> b/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml >>>>>> index bad8f019a8d3..79f55620eb70 100644 >>>>>> --- >>>>>> a/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml >>>>>> +++ >>>>>> b/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml >>>>>> @@ -8,18 +8,20 @@ title: Qualcomm Video Clock & Reset Controller on >>>>>> SM8450 >>>>>> >>>>>> maintainers: >>>>>> - Taniya Das <quic_tdas@quicinc.com> >>>>>> + - Jagadeesh Kona <quic_jkona@quicinc.com> >>>>>> >>>>>> description: | >>>>>> Qualcomm video clock control module provides the clocks, resets >>>>>> and power >>>>>> domains on SM8450. >>>>>> >>>>>> - See also:: include/dt-bindings/clock/qcom,videocc-sm8450.h >>>>>> + See also:: include/dt-bindings/clock/qcom,sm8450-videocc.h >>>>> >>>>> This almost pleads to go to a separate patch. Fixes generally should >>>>> be separated from the rest of the changes. >>>>> >>>> >>>> Thanks Dmitry for your review. >>>> >>>> Sure, will separate this into a separate patch in next series. >>>> >>>>>> >>>>>> properties: >>>>>> compatible: >>>>>> enum: >>>>>> - qcom,sm8450-videocc >>>>>> - qcom,sm8550-videocc >>>>>> + - qcom,sm8650-videocc >>>>>> >>>>>> reg: >>>>>> maxItems: 1 >>>>>> diff --git a/include/dt-bindings/clock/qcom,sm8450-videocc.h >>>>>> b/include/dt-bindings/clock/qcom,sm8450-videocc.h >>>>>> index 9d795adfe4eb..ecfebe52e4bb 100644 >>>>>> --- a/include/dt-bindings/clock/qcom,sm8450-videocc.h >>>>>> +++ b/include/dt-bindings/clock/qcom,sm8450-videocc.h >>>>>> @@ -1,6 +1,6 @@ >>>>>> /* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ >>>>>> /* >>>>>> - * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights >>>>>> reserved. >>>>>> + * Copyright (c) 2023-2024, Qualcomm Innovation Center, Inc. All >>>>>> rights reserved. >>>>>> */ >>>>>> >>>>>> #ifndef _DT_BINDINGS_CLK_QCOM_VIDEO_CC_SM8450_H >>>>>> @@ -19,6 +19,11 @@ >>>>>> #define >>>>>> VIDEO_CC_MVS1C_DIV2_DIV_CLK_SRC 9 >>>>>> #define VIDEO_CC_PLL0 10 >>>>>> #define VIDEO_CC_PLL1 11 >>>>>> +#define >>>>>> VIDEO_CC_MVS0_SHIFT_CLK 12 >>>>>> +#define VIDEO_CC_MVS0C_SHIFT_CLK 13 >>>>>> +#define >>>>>> VIDEO_CC_MVS1_SHIFT_CLK 14 >>>>>> +#define VIDEO_CC_MVS1C_SHIFT_CLK 15 >>>>>> +#define VIDEO_CC_XO_CLK_SRC 16 >>>>> >>>>> Are these values applicable to sm8450? >>>>> >>>> >>>> No, the shift clocks above are part of SM8650 only. To reuse the >>>> existing SM8550 videocc driver for SM8650 and to register these shift >>>> clocks for SM8650, I added them here. >>>> >>> >>> In such case I'd strongly suggest to add a new qcom,sm8650-videocc.h >>> file, >>> and do #include qcom,sm8450-videocc.h in it, thus the new header will be >>> really a short one. >>> >>> This will add pristine clarity. >>> >> >> Thanks Vladimir for your suggestion. I believe adding a comment for >> these set of clocks should be sufficient to indicate these clocks are >> applicable only for SM8650, I can add the required comment and post the >> next series. Please let me know if this works? > > Well, I didn't get any new information to abandon my suggestion, what is > wrong with it or why is it less preferable? > > Even if you add a comment in the header file, it means that for SM8450 > platforms you'll begin to define inapplicable/unrelated macro for the > platform, which opens a small risk of the misusage, and which can be > easily avoided. I believe that the clarity is better for maintenance. > Yes, I agree. Will check and move these new clocks to a separate header file in next series. Thanks! Thanks, Jagadeesh
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml index bad8f019a8d3..79f55620eb70 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml @@ -8,18 +8,20 @@ title: Qualcomm Video Clock & Reset Controller on SM8450 maintainers: - Taniya Das <quic_tdas@quicinc.com> + - Jagadeesh Kona <quic_jkona@quicinc.com> description: | Qualcomm video clock control module provides the clocks, resets and power domains on SM8450. - See also:: include/dt-bindings/clock/qcom,videocc-sm8450.h + See also:: include/dt-bindings/clock/qcom,sm8450-videocc.h properties: compatible: enum: - qcom,sm8450-videocc - qcom,sm8550-videocc + - qcom,sm8650-videocc reg: maxItems: 1 diff --git a/include/dt-bindings/clock/qcom,sm8450-videocc.h b/include/dt-bindings/clock/qcom,sm8450-videocc.h index 9d795adfe4eb..ecfebe52e4bb 100644 --- a/include/dt-bindings/clock/qcom,sm8450-videocc.h +++ b/include/dt-bindings/clock/qcom,sm8450-videocc.h @@ -1,6 +1,6 @@ /* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ /* - * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved. + * Copyright (c) 2023-2024, Qualcomm Innovation Center, Inc. All rights reserved. */ #ifndef _DT_BINDINGS_CLK_QCOM_VIDEO_CC_SM8450_H @@ -19,6 +19,11 @@ #define VIDEO_CC_MVS1C_DIV2_DIV_CLK_SRC 9 #define VIDEO_CC_PLL0 10 #define VIDEO_CC_PLL1 11 +#define VIDEO_CC_MVS0_SHIFT_CLK 12 +#define VIDEO_CC_MVS0C_SHIFT_CLK 13 +#define VIDEO_CC_MVS1_SHIFT_CLK 14 +#define VIDEO_CC_MVS1C_SHIFT_CLK 15 +#define VIDEO_CC_XO_CLK_SRC 16 /* VIDEO_CC power domains */ #define VIDEO_CC_MVS0C_GDSC 0 @@ -34,5 +39,6 @@ #define CVP_VIDEO_CC_MVS1C_BCR 4 #define VIDEO_CC_MVS0C_CLK_ARES 5 #define VIDEO_CC_MVS1C_CLK_ARES 6 +#define VIDEO_CC_XO_CLK_ARES 7 #endif