| Message ID | 20240331-samsung-galaxy-zfold5-q5q-v3-2-17ae8d0a9fba@yahoo.com (mailing list archive) |
|---|---|
| State | Superseded, archived |
| Headers | show |
| Series | Samsung Galaxy Z Fold5 initial support | expand |
Hi, On 31/03/2024 12:56, Alexandru Marc Serdeliuc via B4 Relay wrote: > From: Alexandru Marc Serdeliuc <serdeliuk@yahoo.com> > > Add support for Samsung Galaxy Z Fold5 (q5q) foldable phone based on sm8550 > > Currently working features: > - Framebuffer > - UFS > - i2c > - Buttons > > Signed-off-by: Alexandru Marc Serdeliuc <serdeliuk@yahoo.com> > --- > arch/arm64/boot/dts/qcom/Makefile | 1 + > arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dts | 582 ++++++++++++++++++++++++ > 2 files changed, 583 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > index 7d40ec5e7d21..a7503fd35b6c 100644 > --- a/arch/arm64/boot/dts/qcom/Makefile > +++ b/arch/arm64/boot/dts/qcom/Makefile > @@ -241,6 +241,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8450-sony-xperia-nagara-pdx224.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm8550-hdk.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm8550-mtp.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm8550-qrd.dtb > +dtb-$(CONFIG_ARCH_QCOM) += sm8550-samsung-q5q.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm8650-mtp.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm8650-qrd.dtb > dtb-$(CONFIG_ARCH_QCOM) += x1e80100-crd.dtb > diff --git a/arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dts b/arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dts > new file mode 100644 > index 000000000000..6619ed00c350 > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dts > @@ -0,0 +1,582 @@ > +// SPDX-License-Identifier: BSD-3-Clause > +/* > + * Copyright (c) 2024, Alexandru Marc Serdeliuc <serdeliuk@yahoo.com> > + * Copyright (c) 2024, David Wronek <david@mainlining.org> > + * Copyright (c) 2022, Linaro Limited > + */ > + > +/dts-v1/; > + > +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> > +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> > +#include "sm8550.dtsi" > +#include "pm8550.dtsi" > +#include "pm8550vs.dtsi" > +#include "pmk8550.dtsi" > + > +/ { > + model = "Samsung Galaxy Z Fold5"; > + compatible = "samsung,q5q", "qcom,sm8550"; > + chassis-type = "handset"; > + > + aliases { > + serial0 = &uart7; > + }; > + > + chosen { > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + framebuffer: framebuffer@b8000000 { > + compatible = "simple-framebuffer"; > + reg = <0x0 0xb8000000 0x0 0x2b00000>; > + width = <2176>; > + height = <1812>; > + stride = <(2176 * 4)>; > + format = "a8r8g8b8"; > + }; > + }; > + > + gpio-keys { > + compatible = "gpio-keys"; > + pinctrl-0 = <&volume_up_n>; > + pinctrl-names = "default"; > + > + key-volume-up { > + label = "Volume Up"; > + linux,code = <KEY_VOLUMEUP>; > + gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>; > + debounce-interval = <15>; > + linux,can-disable; > + wakeup-source; > + }; > + }; > + > + vph_pwr: vph-pwr-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "vph_pwr"; > + regulator-min-microvolt = <3700000>; > + regulator-max-microvolt = <3700000>; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + reserved-memory { > + /* > + * The bootloader will only keep display hardware enabled > + * if this memory region is named exactly 'splash_region' > + */ > + splash_region@b8000000 { > + reg = <0x0 0xb8000000 0x0 0x2b00000>; > + no-map; > + }; > + }; > +}; > + > +&apps_rsc { > + regulators-0 { > + compatible = "qcom,pm8550-rpmh-regulators"; > + qcom,pmic-id = "b"; > + > + vreg_bob1: bob1 { > + regulator-name = "vreg_bob1"; > + regulator-min-microvolt = <3296000>; > + regulator-max-microvolt = <3960000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_bob2: bob2 { > + regulator-name = "vreg_bob2"; > + regulator-min-microvolt = <2720000>; > + regulator-max-microvolt = <3960000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l1b_1p8: ldo1 { > + regulator-name = "vreg_l1b_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l2b_3p0: ldo2 { > + regulator-name = "vreg_l2b_3p0"; > + regulator-min-microvolt = <3008000>; > + regulator-max-microvolt = <3008000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l5b_3p1: ldo5 { > + regulator-name = "vreg_l5b_3p1"; > + regulator-min-microvolt = <3104000>; > + regulator-max-microvolt = <3104000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l6b_1p8: ldo6 { > + regulator-name = "vreg_l6b_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3008000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l7b_1p8: ldo7 { > + regulator-name = "vreg_l7b_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3008000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l8b_1p8: ldo8 { > + regulator-name = "vreg_l8b_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3008000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l9b_2p9: ldo9 { > + regulator-name = "vreg_l9b_2p9"; > + regulator-min-microvolt = <2960000>; > + regulator-max-microvolt = <3008000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l11b_1p2: ldo11 { > + regulator-name = "vreg_l11b_1p2"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1504000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l12b_1p8: ldo12 { > + regulator-name = "vreg_l12b_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l13b_3p0: ldo13 { > + regulator-name = "vreg_l13b_3p0"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l14b_3p2: ldo14 { > + regulator-name = "vreg_l14b_3p2"; > + regulator-min-microvolt = <3200000>; > + regulator-max-microvolt = <3200000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l15b_1p8: ldo15 { > + regulator-name = "vreg_l15b_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + regulator-allow-set-load; > + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM > + RPMH_REGULATOR_MODE_HPM>; > + regulator-always-on; > + }; > + > + vreg_l16b_2p8: ldo16 { > + regulator-name = "vreg_l16b_2p8"; > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <2800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l17b_2p5: ldo17 { > + regulator-name = "vreg_l17b_2p5"; > + regulator-min-microvolt = <2504000>; > + regulator-max-microvolt = <2504000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > + > + regulators-1 { > + compatible = "qcom,pm8550vs-rpmh-regulators"; > + qcom,pmic-id = "c"; > + > + vreg_l3c_0p91: ldo3 { > + regulator-name = "vreg_l3c_0p9"; > + regulator-min-microvolt = <880000>; > + regulator-max-microvolt = <912000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > + > + regulators-2 { > + compatible = "qcom,pm8550vs-rpmh-regulators"; > + qcom,pmic-id = "d"; > + > + vreg_l1d_0p88: ldo1 { > + regulator-name = "vreg_l1d_0p88"; > + regulator-min-microvolt = <880000>; > + regulator-max-microvolt = <920000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > + > + regulators-3 { > + compatible = "qcom,pm8550vs-rpmh-regulators"; > + qcom,pmic-id = "e"; > + > + vreg_s4e_0p9: smps4 { > + regulator-name = "vreg_s4e_0p9"; > + regulator-min-microvolt = <904000>; > + regulator-max-microvolt = <984000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_s5e_1p1: smps5 { > + regulator-name = "vreg_s5e_1p1"; > + regulator-min-microvolt = <1080000>; > + regulator-max-microvolt = <1120000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l1e_0p88: ldo1 { > + regulator-name = "vreg_l1e_0p88"; > + regulator-min-microvolt = <880000>; > + regulator-max-microvolt = <880000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l2e_0p9: ldo2 { > + regulator-name = "vreg_l2e_0p9"; > + regulator-min-microvolt = <904000>; > + regulator-max-microvolt = <970000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l3e_1p2: ldo3 { > + regulator-name = "vreg_l3e_1p2"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > + > + regulators-4 { > + compatible = "qcom,pm8550ve-rpmh-regulators"; > + qcom,pmic-id = "f"; > + > + vreg_s4f_0p5: smps4 { > + regulator-name = "vreg_s4f_0p5"; > + regulator-min-microvolt = <500000>; > + regulator-max-microvolt = <700000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l1f_0p9: ldo1 { > + regulator-name = "vreg_l1f_0p9"; > + regulator-min-microvolt = <912000>; > + regulator-max-microvolt = <912000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l2f_0p88: ldo2 { > + regulator-name = "vreg_l2f_0p88"; > + regulator-min-microvolt = <880000>; > + regulator-max-microvolt = <912000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l3f_0p91: ldo3 { > + regulator-name = "vreg_l3f_0p91"; > + regulator-min-microvolt = <880000>; > + regulator-max-microvolt = <912000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > + > + regulators-5 { > + compatible = "qcom,pm8550vs-rpmh-regulators"; > + qcom,pmic-id = "g"; > + > + vreg_s1g_1p2: smps1 { > + regulator-name = "vreg_s1g_1p2"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1300000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_s2g_0p8: smps2 { > + regulator-name = "vreg_s2g_0p8"; > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <1000000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_s3g_0p7: smps3 { > + regulator-name = "vreg_s3g_0p7"; > + regulator-min-microvolt = <300000>; > + regulator-max-microvolt = <1004000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_s4g_1p3: smps4 { > + regulator-name = "vreg_s4g_1p3"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1352000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_s5g_0p8: smps5 { > + regulator-name = "vreg_s5g_0p8"; > + regulator-min-microvolt = <500000>; > + regulator-max-microvolt = <1004000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_s6g_1p8: smps6 { > + regulator-name = "vreg_s6g_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <2000000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l1g_1p2: ldo1 { > + regulator-name = "vreg_l1g_1p2"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l2g_1p2: ldo2 { > + regulator-name = "vreg_l2g_1p2"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l3g_1p2: ldo3 { > + regulator-name = "vreg_l3g_1p2"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > + > + regulators-6 { > + compatible = "qcom,pm8010-rpmh-regulators"; > + qcom,pmic-id = "m"; > + > + vreg_l1m_1p056: ldo1 { > + regulator-name = "vreg_l1m_1p056"; > + regulator-min-microvolt = <1056000>; > + regulator-max-microvolt = <1056000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l2m_1p056: ldo2 { > + regulator-name = "vreg_l2m_1p056"; > + regulator-min-microvolt = <1056000>; > + regulator-max-microvolt = <1056000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l3m_2p8: ldo3 { > + regulator-name = "vreg_l3m_2p8"; > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <2800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l4m_2p8: ldo4 { > + regulator-name = "vreg_l4m_2p8"; > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <2800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l5m_1p8: ldo5 { > + regulator-name = "vreg_l5m_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l6m_1p8: ldo6 { > + regulator-name = "vreg_l6m_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l7m_2p9: ldo7 { > + regulator-name = "vreg_l7m_2p9"; > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <2904000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > + > + regulators-7 { > + compatible = "qcom,pm8010-rpmh-regulators"; > + qcom,pmic-id = "n"; > + > + vreg_l1n_1p1: ldo1 { > + regulator-name = "vreg_l1n_1p1"; > + regulator-min-microvolt = <1104000>; > + regulator-max-microvolt = <1200000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l2n_1p1: ldo2 { > + regulator-name = "vreg_l2n_1p1"; > + regulator-min-microvolt = <1104000>; > + regulator-max-microvolt = <1200000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l3n_2p8: ldo3 { > + regulator-name = "vreg_l3n_2p8"; > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <3000000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l4n_2p8: ldo4 { > + regulator-name = "vreg_l4n_2p8"; > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <3300000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l5n_1p8: ldo5 { > + regulator-name = "vreg_l5n_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l6n_3p3: ldo6 { > + regulator-name = "vreg_l6n_3p3"; > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <3304000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l7n_2p96: ldo7 { > + regulator-name = "vreg_l7n_2p96"; > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <2960000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > +}; > + > + Spurious blank line > +&dispcc { > + status = "disabled"; > +}; > + > +&i2c_master_hub_0 { > + status = "okay"; > +}; > + > +&pcie_1_phy_aux_clk { > + clock-frequency = <1000>; > +}; > + Please rebase on https://lore.kernel.org/all/20240322-topic-sm8x50-upstream-pcie-1-phy-aux-clk-v2-6-3ec0a966d52f@linaro.org/ and drop this > +&pcie0 { > + wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; > + perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; > + pinctrl-0 = <&pcie0_default_state>; > + pinctrl-names = "default"; > + status = "okay"; > +}; > + > +&pcie0_phy { > + vdda-phy-supply = <&vreg_l1e_0p88>; > + vdda-pll-supply = <&vreg_l3e_1p2>; > + status = "okay"; > +}; > + > +&pcie1 { > + wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>; > + perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>; > + pinctrl-0 = <&pcie1_default_state>; > + pinctrl-names = "default"; > + status = "okay"; > +}; > + > +&pcie1_phy { > + vdda-phy-supply = <&vreg_l3c_0p91>; > + vdda-pll-supply = <&vreg_l3e_1p2>; > + vdda-qref-supply = <&vreg_l1e_0p88>; > + status = "okay"; > +}; Is the second PCIe bus really used ? > + > +&pm8550_gpios { > + volume_up_n: volume-up-n-state { > + pins = "gpio6"; > + function = "normal"; > + power-source = <1>; > + bias-pull-up; > + input-enable; > + }; > +}; > + > +&pon_pwrkey { > + status = "okay"; > +}; > + > +&pon_resin { > + status = "okay"; > + linux,code = <KEY_VOLUMEDOWN>; > +}; > + > +&qupv3_id_0 { > + status = "okay"; > +}; > + > +&remoteproc_adsp { > + firmware-name = "qcom/sm8550/adsp.mbn", > + "qcom/sm8550/adsp_dtb.mbn"; > + status = "okay"; > +}; > + > +&remoteproc_cdsp { > + firmware-name = "qcom/sm8550/cdsp.mbn", > + "qcom/sm8550/cdsp_dtb.mbn"; > + status = "okay"; > +}; > + > +&remoteproc_mpss { > + firmware-name = "qcom/sm8550/modem.mbn", > + "qcom/sm8550/modem_dtb.mbn"; > + status = "okay"; > +}; > + > +&sleep_clk { > + clock-frequency = <32000>; > +}; > + > +&tlmm { > + gpio-reserved-ranges = <36 4>, <50 2>; > +}; > + > +&ufs_mem_hc { > + reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>; > + vcc-supply = <&vreg_l17b_2p5>; > + vcc-max-microamp = <1300000>; > + vccq-supply = <&vreg_l1g_1p2>; > + vccq-max-microamp = <1200000>; > + vdd-hba-supply = <&vreg_l3g_1p2>; > + status = "okay"; > +}; > + > +&ufs_mem_phy { > + vdda-phy-supply = <&vreg_l1d_0p88>; > + vdda-pll-supply = <&vreg_l3e_1p2>; > + status = "okay"; > +}; > + > +&xo_board { > + clock-frequency = <76800000>; > +}; > Thanks, Neil
Hi, thanks, that's strange, I am already using the right kernel source that has the mentioned patches... I am going to check why the dtb was successfully compiled, remove all the mentioned issues and generate a v4 On 3/4/24 10:00, neil.armstrong@linaro.org wrote: > Hi, > > On 31/03/2024 12:56, Alexandru Marc Serdeliuc via B4 Relay wrote: >> From: Alexandru Marc Serdeliuc <serdeliuk@yahoo.com> >> >> Add support for Samsung Galaxy Z Fold5 (q5q) foldable phone based on >> sm8550 >> >> Currently working features: >> - Framebuffer >> - UFS >> - i2c >> - Buttons >> >> Signed-off-by: Alexandru Marc Serdeliuc <serdeliuk@yahoo.com> >> --- >> arch/arm64/boot/dts/qcom/Makefile | 1 + >> arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dts | 582 >> ++++++++++++++++++++++++ >> 2 files changed, 583 insertions(+) >> >> diff --git a/arch/arm64/boot/dts/qcom/Makefile >> b/arch/arm64/boot/dts/qcom/Makefile >> index 7d40ec5e7d21..a7503fd35b6c 100644 >> --- a/arch/arm64/boot/dts/qcom/Makefile >> +++ b/arch/arm64/boot/dts/qcom/Makefile >> @@ -241,6 +241,7 @@ dtb-$(CONFIG_ARCH_QCOM) += >> sm8450-sony-xperia-nagara-pdx224.dtb >> dtb-$(CONFIG_ARCH_QCOM) += sm8550-hdk.dtb >> dtb-$(CONFIG_ARCH_QCOM) += sm8550-mtp.dtb >> dtb-$(CONFIG_ARCH_QCOM) += sm8550-qrd.dtb >> +dtb-$(CONFIG_ARCH_QCOM) += sm8550-samsung-q5q.dtb >> dtb-$(CONFIG_ARCH_QCOM) += sm8650-mtp.dtb >> dtb-$(CONFIG_ARCH_QCOM) += sm8650-qrd.dtb >> dtb-$(CONFIG_ARCH_QCOM) += x1e80100-crd.dtb >> diff --git a/arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dts >> b/arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dts >> new file mode 100644 >> index 000000000000..6619ed00c350 >> --- /dev/null >> +++ b/arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dts >> @@ -0,0 +1,582 @@ >> +// SPDX-License-Identifier: BSD-3-Clause >> +/* >> + * Copyright (c) 2024, Alexandru Marc Serdeliuc <serdeliuk@yahoo.com> >> + * Copyright (c) 2024, David Wronek <david@mainlining.org> >> + * Copyright (c) 2022, Linaro Limited >> + */ >> + >> +/dts-v1/; >> + >> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> >> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> >> +#include "sm8550.dtsi" >> +#include "pm8550.dtsi" >> +#include "pm8550vs.dtsi" >> +#include "pmk8550.dtsi" >> + >> +/ { >> + model = "Samsung Galaxy Z Fold5"; >> + compatible = "samsung,q5q", "qcom,sm8550"; >> + chassis-type = "handset"; >> + >> + aliases { >> + serial0 = &uart7; >> + }; >> + >> + chosen { >> + #address-cells = <2>; >> + #size-cells = <2>; >> + ranges; >> + >> + framebuffer: framebuffer@b8000000 { >> + compatible = "simple-framebuffer"; >> + reg = <0x0 0xb8000000 0x0 0x2b00000>; >> + width = <2176>; >> + height = <1812>; >> + stride = <(2176 * 4)>; >> + format = "a8r8g8b8"; >> + }; >> + }; >> + >> + gpio-keys { >> + compatible = "gpio-keys"; >> + pinctrl-0 = <&volume_up_n>; >> + pinctrl-names = "default"; >> + >> + key-volume-up { >> + label = "Volume Up"; >> + linux,code = <KEY_VOLUMEUP>; >> + gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>; >> + debounce-interval = <15>; >> + linux,can-disable; >> + wakeup-source; >> + }; >> + }; >> + >> + vph_pwr: vph-pwr-regulator { >> + compatible = "regulator-fixed"; >> + regulator-name = "vph_pwr"; >> + regulator-min-microvolt = <3700000>; >> + regulator-max-microvolt = <3700000>; >> + regulator-always-on; >> + regulator-boot-on; >> + }; >> + >> + reserved-memory { >> + /* >> + * The bootloader will only keep display hardware enabled >> + * if this memory region is named exactly 'splash_region' >> + */ >> + splash_region@b8000000 { >> + reg = <0x0 0xb8000000 0x0 0x2b00000>; >> + no-map; >> + }; >> + }; >> +}; >> + >> +&apps_rsc { >> + regulators-0 { >> + compatible = "qcom,pm8550-rpmh-regulators"; >> + qcom,pmic-id = "b"; >> + >> + vreg_bob1: bob1 { >> + regulator-name = "vreg_bob1"; >> + regulator-min-microvolt = <3296000>; >> + regulator-max-microvolt = <3960000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_bob2: bob2 { >> + regulator-name = "vreg_bob2"; >> + regulator-min-microvolt = <2720000>; >> + regulator-max-microvolt = <3960000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l1b_1p8: ldo1 { >> + regulator-name = "vreg_l1b_1p8"; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l2b_3p0: ldo2 { >> + regulator-name = "vreg_l2b_3p0"; >> + regulator-min-microvolt = <3008000>; >> + regulator-max-microvolt = <3008000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l5b_3p1: ldo5 { >> + regulator-name = "vreg_l5b_3p1"; >> + regulator-min-microvolt = <3104000>; >> + regulator-max-microvolt = <3104000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l6b_1p8: ldo6 { >> + regulator-name = "vreg_l6b_1p8"; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <3008000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l7b_1p8: ldo7 { >> + regulator-name = "vreg_l7b_1p8"; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <3008000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l8b_1p8: ldo8 { >> + regulator-name = "vreg_l8b_1p8"; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <3008000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l9b_2p9: ldo9 { >> + regulator-name = "vreg_l9b_2p9"; >> + regulator-min-microvolt = <2960000>; >> + regulator-max-microvolt = <3008000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l11b_1p2: ldo11 { >> + regulator-name = "vreg_l11b_1p2"; >> + regulator-min-microvolt = <1200000>; >> + regulator-max-microvolt = <1504000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l12b_1p8: ldo12 { >> + regulator-name = "vreg_l12b_1p8"; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l13b_3p0: ldo13 { >> + regulator-name = "vreg_l13b_3p0"; >> + regulator-min-microvolt = <3000000>; >> + regulator-max-microvolt = <3000000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l14b_3p2: ldo14 { >> + regulator-name = "vreg_l14b_3p2"; >> + regulator-min-microvolt = <3200000>; >> + regulator-max-microvolt = <3200000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l15b_1p8: ldo15 { >> + regulator-name = "vreg_l15b_1p8"; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + regulator-allow-set-load; >> + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM >> + RPMH_REGULATOR_MODE_HPM>; >> + regulator-always-on; >> + }; >> + >> + vreg_l16b_2p8: ldo16 { >> + regulator-name = "vreg_l16b_2p8"; >> + regulator-min-microvolt = <2800000>; >> + regulator-max-microvolt = <2800000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l17b_2p5: ldo17 { >> + regulator-name = "vreg_l17b_2p5"; >> + regulator-min-microvolt = <2504000>; >> + regulator-max-microvolt = <2504000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + }; >> + >> + regulators-1 { >> + compatible = "qcom,pm8550vs-rpmh-regulators"; >> + qcom,pmic-id = "c"; >> + >> + vreg_l3c_0p91: ldo3 { >> + regulator-name = "vreg_l3c_0p9"; >> + regulator-min-microvolt = <880000>; >> + regulator-max-microvolt = <912000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + }; >> + >> + regulators-2 { >> + compatible = "qcom,pm8550vs-rpmh-regulators"; >> + qcom,pmic-id = "d"; >> + >> + vreg_l1d_0p88: ldo1 { >> + regulator-name = "vreg_l1d_0p88"; >> + regulator-min-microvolt = <880000>; >> + regulator-max-microvolt = <920000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + }; >> + >> + regulators-3 { >> + compatible = "qcom,pm8550vs-rpmh-regulators"; >> + qcom,pmic-id = "e"; >> + >> + vreg_s4e_0p9: smps4 { >> + regulator-name = "vreg_s4e_0p9"; >> + regulator-min-microvolt = <904000>; >> + regulator-max-microvolt = <984000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_s5e_1p1: smps5 { >> + regulator-name = "vreg_s5e_1p1"; >> + regulator-min-microvolt = <1080000>; >> + regulator-max-microvolt = <1120000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l1e_0p88: ldo1 { >> + regulator-name = "vreg_l1e_0p88"; >> + regulator-min-microvolt = <880000>; >> + regulator-max-microvolt = <880000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l2e_0p9: ldo2 { >> + regulator-name = "vreg_l2e_0p9"; >> + regulator-min-microvolt = <904000>; >> + regulator-max-microvolt = <970000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l3e_1p2: ldo3 { >> + regulator-name = "vreg_l3e_1p2"; >> + regulator-min-microvolt = <1200000>; >> + regulator-max-microvolt = <1200000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + }; >> + >> + regulators-4 { >> + compatible = "qcom,pm8550ve-rpmh-regulators"; >> + qcom,pmic-id = "f"; >> + >> + vreg_s4f_0p5: smps4 { >> + regulator-name = "vreg_s4f_0p5"; >> + regulator-min-microvolt = <500000>; >> + regulator-max-microvolt = <700000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l1f_0p9: ldo1 { >> + regulator-name = "vreg_l1f_0p9"; >> + regulator-min-microvolt = <912000>; >> + regulator-max-microvolt = <912000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l2f_0p88: ldo2 { >> + regulator-name = "vreg_l2f_0p88"; >> + regulator-min-microvolt = <880000>; >> + regulator-max-microvolt = <912000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l3f_0p91: ldo3 { >> + regulator-name = "vreg_l3f_0p91"; >> + regulator-min-microvolt = <880000>; >> + regulator-max-microvolt = <912000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + }; >> + >> + regulators-5 { >> + compatible = "qcom,pm8550vs-rpmh-regulators"; >> + qcom,pmic-id = "g"; >> + >> + vreg_s1g_1p2: smps1 { >> + regulator-name = "vreg_s1g_1p2"; >> + regulator-min-microvolt = <1200000>; >> + regulator-max-microvolt = <1300000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_s2g_0p8: smps2 { >> + regulator-name = "vreg_s2g_0p8"; >> + regulator-min-microvolt = <800000>; >> + regulator-max-microvolt = <1000000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_s3g_0p7: smps3 { >> + regulator-name = "vreg_s3g_0p7"; >> + regulator-min-microvolt = <300000>; >> + regulator-max-microvolt = <1004000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_s4g_1p3: smps4 { >> + regulator-name = "vreg_s4g_1p3"; >> + regulator-min-microvolt = <1200000>; >> + regulator-max-microvolt = <1352000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_s5g_0p8: smps5 { >> + regulator-name = "vreg_s5g_0p8"; >> + regulator-min-microvolt = <500000>; >> + regulator-max-microvolt = <1004000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_s6g_1p8: smps6 { >> + regulator-name = "vreg_s6g_1p8"; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <2000000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l1g_1p2: ldo1 { >> + regulator-name = "vreg_l1g_1p2"; >> + regulator-min-microvolt = <1200000>; >> + regulator-max-microvolt = <1200000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l2g_1p2: ldo2 { >> + regulator-name = "vreg_l2g_1p2"; >> + regulator-min-microvolt = <1200000>; >> + regulator-max-microvolt = <1200000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l3g_1p2: ldo3 { >> + regulator-name = "vreg_l3g_1p2"; >> + regulator-min-microvolt = <1200000>; >> + regulator-max-microvolt = <1200000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + }; >> + >> + regulators-6 { >> + compatible = "qcom,pm8010-rpmh-regulators"; >> + qcom,pmic-id = "m"; >> + >> + vreg_l1m_1p056: ldo1 { >> + regulator-name = "vreg_l1m_1p056"; >> + regulator-min-microvolt = <1056000>; >> + regulator-max-microvolt = <1056000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l2m_1p056: ldo2 { >> + regulator-name = "vreg_l2m_1p056"; >> + regulator-min-microvolt = <1056000>; >> + regulator-max-microvolt = <1056000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l3m_2p8: ldo3 { >> + regulator-name = "vreg_l3m_2p8"; >> + regulator-min-microvolt = <2800000>; >> + regulator-max-microvolt = <2800000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l4m_2p8: ldo4 { >> + regulator-name = "vreg_l4m_2p8"; >> + regulator-min-microvolt = <2800000>; >> + regulator-max-microvolt = <2800000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l5m_1p8: ldo5 { >> + regulator-name = "vreg_l5m_1p8"; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l6m_1p8: ldo6 { >> + regulator-name = "vreg_l6m_1p8"; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l7m_2p9: ldo7 { >> + regulator-name = "vreg_l7m_2p9"; >> + regulator-min-microvolt = <2800000>; >> + regulator-max-microvolt = <2904000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + }; >> + >> + regulators-7 { >> + compatible = "qcom,pm8010-rpmh-regulators"; >> + qcom,pmic-id = "n"; >> + >> + vreg_l1n_1p1: ldo1 { >> + regulator-name = "vreg_l1n_1p1"; >> + regulator-min-microvolt = <1104000>; >> + regulator-max-microvolt = <1200000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l2n_1p1: ldo2 { >> + regulator-name = "vreg_l2n_1p1"; >> + regulator-min-microvolt = <1104000>; >> + regulator-max-microvolt = <1200000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l3n_2p8: ldo3 { >> + regulator-name = "vreg_l3n_2p8"; >> + regulator-min-microvolt = <2800000>; >> + regulator-max-microvolt = <3000000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l4n_2p8: ldo4 { >> + regulator-name = "vreg_l4n_2p8"; >> + regulator-min-microvolt = <2800000>; >> + regulator-max-microvolt = <3300000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l5n_1p8: ldo5 { >> + regulator-name = "vreg_l5n_1p8"; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l6n_3p3: ldo6 { >> + regulator-name = "vreg_l6n_3p3"; >> + regulator-min-microvolt = <2800000>; >> + regulator-max-microvolt = <3304000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_l7n_2p96: ldo7 { >> + regulator-name = "vreg_l7n_2p96"; >> + regulator-min-microvolt = <2800000>; >> + regulator-max-microvolt = <2960000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + }; >> +}; >> + >> + > > Spurious blank line > >> +&dispcc { >> + status = "disabled"; >> +}; >> + >> +&i2c_master_hub_0 { >> + status = "okay"; >> +}; >> + >> +&pcie_1_phy_aux_clk { >> + clock-frequency = <1000>; >> +}; >> + > > Please rebase on > https://lore.kernel.org/all/20240322-topic-sm8x50-upstream-pcie-1-phy-aux-clk-v2-6-3ec0a966d52f@linaro.org/ > and drop this > >> +&pcie0 { >> + wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; >> + perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; >> + pinctrl-0 = <&pcie0_default_state>; >> + pinctrl-names = "default"; >> + status = "okay"; >> +}; >> + >> +&pcie0_phy { >> + vdda-phy-supply = <&vreg_l1e_0p88>; >> + vdda-pll-supply = <&vreg_l3e_1p2>; >> + status = "okay"; >> +}; >> + >> +&pcie1 { >> + wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>; >> + perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>; >> + pinctrl-0 = <&pcie1_default_state>; >> + pinctrl-names = "default"; >> + status = "okay"; >> +}; >> + >> +&pcie1_phy { >> + vdda-phy-supply = <&vreg_l3c_0p91>; >> + vdda-pll-supply = <&vreg_l3e_1p2>; >> + vdda-qref-supply = <&vreg_l1e_0p88>; >> + status = "okay"; >> +}; > > Is the second PCIe bus really used ? > >> + >> +&pm8550_gpios { >> + volume_up_n: volume-up-n-state { >> + pins = "gpio6"; >> + function = "normal"; >> + power-source = <1>; >> + bias-pull-up; >> + input-enable; >> + }; >> +}; >> + >> +&pon_pwrkey { >> + status = "okay"; >> +}; >> + >> +&pon_resin { >> + status = "okay"; >> + linux,code = <KEY_VOLUMEDOWN>; >> +}; >> + >> +&qupv3_id_0 { >> + status = "okay"; >> +}; >> + >> +&remoteproc_adsp { >> + firmware-name = "qcom/sm8550/adsp.mbn", >> + "qcom/sm8550/adsp_dtb.mbn"; >> + status = "okay"; >> +}; >> + >> +&remoteproc_cdsp { >> + firmware-name = "qcom/sm8550/cdsp.mbn", >> + "qcom/sm8550/cdsp_dtb.mbn"; >> + status = "okay"; >> +}; >> + >> +&remoteproc_mpss { >> + firmware-name = "qcom/sm8550/modem.mbn", >> + "qcom/sm8550/modem_dtb.mbn"; >> + status = "okay"; >> +}; >> + >> +&sleep_clk { >> + clock-frequency = <32000>; >> +}; >> + >> +&tlmm { >> + gpio-reserved-ranges = <36 4>, <50 2>; >> +}; >> + >> +&ufs_mem_hc { >> + reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>; >> + vcc-supply = <&vreg_l17b_2p5>; >> + vcc-max-microamp = <1300000>; >> + vccq-supply = <&vreg_l1g_1p2>; >> + vccq-max-microamp = <1200000>; >> + vdd-hba-supply = <&vreg_l3g_1p2>; >> + status = "okay"; >> +}; >> + >> +&ufs_mem_phy { >> + vdda-phy-supply = <&vreg_l1d_0p88>; >> + vdda-pll-supply = <&vreg_l3e_1p2>; >> + status = "okay"; >> +}; >> + >> +&xo_board { >> + clock-frequency = <76800000>; >> +}; >> > > Thanks, > Neil
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 7d40ec5e7d21..a7503fd35b6c 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -241,6 +241,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8450-sony-xperia-nagara-pdx224.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8550-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8550-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8550-qrd.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8550-samsung-q5q.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8650-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8650-qrd.dtb dtb-$(CONFIG_ARCH_QCOM) += x1e80100-crd.dtb diff --git a/arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dts b/arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dts new file mode 100644 index 000000000000..6619ed00c350 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dts @@ -0,0 +1,582 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2024, Alexandru Marc Serdeliuc <serdeliuk@yahoo.com> + * Copyright (c) 2024, David Wronek <david@mainlining.org> + * Copyright (c) 2022, Linaro Limited + */ + +/dts-v1/; + +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sm8550.dtsi" +#include "pm8550.dtsi" +#include "pm8550vs.dtsi" +#include "pmk8550.dtsi" + +/ { + model = "Samsung Galaxy Z Fold5"; + compatible = "samsung,q5q", "qcom,sm8550"; + chassis-type = "handset"; + + aliases { + serial0 = &uart7; + }; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer: framebuffer@b8000000 { + compatible = "simple-framebuffer"; + reg = <0x0 0xb8000000 0x0 0x2b00000>; + width = <2176>; + height = <1812>; + stride = <(2176 * 4)>; + format = "a8r8g8b8"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&volume_up_n>; + pinctrl-names = "default"; + + key-volume-up { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + regulator-boot-on; + }; + + reserved-memory { + /* + * The bootloader will only keep display hardware enabled + * if this memory region is named exactly 'splash_region' + */ + splash_region@b8000000 { + reg = <0x0 0xb8000000 0x0 0x2b00000>; + no-map; + }; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8550-rpmh-regulators"; + qcom,pmic-id = "b"; + + vreg_bob1: bob1 { + regulator-name = "vreg_bob1"; + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob2: bob2 { + regulator-name = "vreg_bob2"; + regulator-min-microvolt = <2720000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1b_1p8: ldo1 { + regulator-name = "vreg_l1b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2b_3p0: ldo2 { + regulator-name = "vreg_l2b_3p0"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5b_3p1: ldo5 { + regulator-name = "vreg_l5b_3p1"; + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6b_1p8: ldo6 { + regulator-name = "vreg_l6b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7b_1p8: ldo7 { + regulator-name = "vreg_l7b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8b_1p8: ldo8 { + regulator-name = "vreg_l8b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9b_2p9: ldo9 { + regulator-name = "vreg_l9b_2p9"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11b_1p2: ldo11 { + regulator-name = "vreg_l11b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12b_1p8: ldo12 { + regulator-name = "vreg_l12b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13b_3p0: ldo13 { + regulator-name = "vreg_l13b_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14b_3p2: ldo14 { + regulator-name = "vreg_l14b_3p2"; + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15b_1p8: ldo15 { + regulator-name = "vreg_l15b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + + vreg_l16b_2p8: ldo16 { + regulator-name = "vreg_l16b_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17b_2p5: ldo17 { + regulator-name = "vreg_l17b_2p5"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + qcom,pmic-id = "c"; + + vreg_l3c_0p91: ldo3 { + regulator-name = "vreg_l3c_0p9"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-2 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + qcom,pmic-id = "d"; + + vreg_l1d_0p88: ldo1 { + regulator-name = "vreg_l1d_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-3 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + qcom,pmic-id = "e"; + + vreg_s4e_0p9: smps4 { + regulator-name = "vreg_s4e_0p9"; + regulator-min-microvolt = <904000>; + regulator-max-microvolt = <984000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5e_1p1: smps5 { + regulator-name = "vreg_s5e_1p1"; + regulator-min-microvolt = <1080000>; + regulator-max-microvolt = <1120000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1e_0p88: ldo1 { + regulator-name = "vreg_l1e_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2e_0p9: ldo2 { + regulator-name = "vreg_l2e_0p9"; + regulator-min-microvolt = <904000>; + regulator-max-microvolt = <970000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3e_1p2: ldo3 { + regulator-name = "vreg_l3e_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-4 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "f"; + + vreg_s4f_0p5: smps4 { + regulator-name = "vreg_s4f_0p5"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <700000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1f_0p9: ldo1 { + regulator-name = "vreg_l1f_0p9"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2f_0p88: ldo2 { + regulator-name = "vreg_l2f_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3f_0p91: ldo3 { + regulator-name = "vreg_l3f_0p91"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-5 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + qcom,pmic-id = "g"; + + vreg_s1g_1p2: smps1 { + regulator-name = "vreg_s1g_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s2g_0p8: smps2 { + regulator-name = "vreg_s2g_0p8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s3g_0p7: smps3 { + regulator-name = "vreg_s3g_0p7"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1004000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s4g_1p3: smps4 { + regulator-name = "vreg_s4g_1p3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1352000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5g_0p8: smps5 { + regulator-name = "vreg_s5g_0p8"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1004000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s6g_1p8: smps6 { + regulator-name = "vreg_s6g_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1g_1p2: ldo1 { + regulator-name = "vreg_l1g_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2g_1p2: ldo2 { + regulator-name = "vreg_l2g_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3g_1p2: ldo3 { + regulator-name = "vreg_l3g_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-6 { + compatible = "qcom,pm8010-rpmh-regulators"; + qcom,pmic-id = "m"; + + vreg_l1m_1p056: ldo1 { + regulator-name = "vreg_l1m_1p056"; + regulator-min-microvolt = <1056000>; + regulator-max-microvolt = <1056000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2m_1p056: ldo2 { + regulator-name = "vreg_l2m_1p056"; + regulator-min-microvolt = <1056000>; + regulator-max-microvolt = <1056000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3m_2p8: ldo3 { + regulator-name = "vreg_l3m_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4m_2p8: ldo4 { + regulator-name = "vreg_l4m_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5m_1p8: ldo5 { + regulator-name = "vreg_l5m_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6m_1p8: ldo6 { + regulator-name = "vreg_l6m_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7m_2p9: ldo7 { + regulator-name = "vreg_l7m_2p9"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-7 { + compatible = "qcom,pm8010-rpmh-regulators"; + qcom,pmic-id = "n"; + + vreg_l1n_1p1: ldo1 { + regulator-name = "vreg_l1n_1p1"; + regulator-min-microvolt = <1104000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2n_1p1: ldo2 { + regulator-name = "vreg_l2n_1p1"; + regulator-min-microvolt = <1104000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3n_2p8: ldo3 { + regulator-name = "vreg_l3n_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4n_2p8: ldo4 { + regulator-name = "vreg_l4n_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5n_1p8: ldo5 { + regulator-name = "vreg_l5n_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6n_3p3: ldo6 { + regulator-name = "vreg_l6n_3p3"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7n_2p96: ldo7 { + regulator-name = "vreg_l7n_2p96"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + + +&dispcc { + status = "disabled"; +}; + +&i2c_master_hub_0 { + status = "okay"; +}; + +&pcie_1_phy_aux_clk { + clock-frequency = <1000>; +}; + +&pcie0 { + wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&pcie0_default_state>; + pinctrl-names = "default"; + status = "okay"; +}; + +&pcie0_phy { + vdda-phy-supply = <&vreg_l1e_0p88>; + vdda-pll-supply = <&vreg_l3e_1p2>; + status = "okay"; +}; + +&pcie1 { + wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>; + perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&pcie1_default_state>; + pinctrl-names = "default"; + status = "okay"; +}; + +&pcie1_phy { + vdda-phy-supply = <&vreg_l3c_0p91>; + vdda-pll-supply = <&vreg_l3e_1p2>; + vdda-qref-supply = <&vreg_l1e_0p88>; + status = "okay"; +}; + +&pm8550_gpios { + volume_up_n: volume-up-n-state { + pins = "gpio6"; + function = "normal"; + power-source = <1>; + bias-pull-up; + input-enable; + }; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + status = "okay"; + linux,code = <KEY_VOLUMEDOWN>; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/sm8550/adsp.mbn", + "qcom/sm8550/adsp_dtb.mbn"; + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/sm8550/cdsp.mbn", + "qcom/sm8550/cdsp_dtb.mbn"; + status = "okay"; +}; + +&remoteproc_mpss { + firmware-name = "qcom/sm8550/modem.mbn", + "qcom/sm8550/modem_dtb.mbn"; + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&tlmm { + gpio-reserved-ranges = <36 4>, <50 2>; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>; + vcc-supply = <&vreg_l17b_2p5>; + vcc-max-microamp = <1300000>; + vccq-supply = <&vreg_l1g_1p2>; + vccq-max-microamp = <1200000>; + vdd-hba-supply = <&vreg_l3g_1p2>; + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l1d_0p88>; + vdda-pll-supply = <&vreg_l3e_1p2>; + status = "okay"; +}; + +&xo_board { + clock-frequency = <76800000>; +};