| Message ID | 20240407-opp_support-v9-4-496184dc45d7@quicinc.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | PCI: qcom: Add support for OPP | expand |
On Sun, Apr 07, 2024 at 10:07:37AM +0530, Krishna chaitanya chundru wrote: > PCIe needs to choose the appropriate performance state of RPMH power > domain and interconnect bandwidth based up on the PCIe gen speed. > > Add the OPP table support to specify RPMH performance states and > interconnect peak bandwidth. > Same comment as the bindings patch. > Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com> > --- > arch/arm64/boot/dts/qcom/sm8450.dtsi | 77 ++++++++++++++++++++++++++++++++++++ > 1 file changed, 77 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi > index 615296e13c43..881e5339cfff 100644 > --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi > +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi > @@ -1855,7 +1855,35 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, > pinctrl-names = "default"; > pinctrl-0 = <&pcie0_default_state>; > > + operating-points-v2 = <&pcie0_opp_table>; > + > status = "disabled"; > + > + pcie0_opp_table: opp-table { > + compatible = "operating-points-v2"; > + > + /* GEN 1x1 */ s/GEN 1x1/Gen 1 x1 Same for all comments - Mani > + opp-2500000 { > + opp-hz = /bits/ 64 <2500000>; > + required-opps = <&rpmhpd_opp_low_svs>; > + opp-peak-kBps = <250000 1>; > + }; > + > + /* GEN 2x1 */ > + opp-5000000 { > + opp-hz = /bits/ 64 <5000000>; > + required-opps = <&rpmhpd_opp_low_svs>; > + opp-peak-kBps = <500000 1>; > + }; > + > + /* GEN 3x1 */ > + opp-8000000 { > + opp-hz = /bits/ 64 <8000000>; > + required-opps = <&rpmhpd_opp_nom>; > + opp-peak-kBps = <984500 1>; > + }; > + }; > + > }; > > pcie0_phy: phy@1c06000 { > @@ -1982,7 +2010,56 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, > pinctrl-names = "default"; > pinctrl-0 = <&pcie1_default_state>; > > + operating-points-v2 = <&pcie1_opp_table>; > + > status = "disabled"; > + > + pcie1_opp_table: opp-table { > + compatible = "operating-points-v2"; > + > + /* GEN 1x1 */ > + opp-2500000 { > + opp-hz = /bits/ 64 <2500000>; > + required-opps = <&rpmhpd_opp_low_svs>; > + opp-peak-kBps = <250000 1>; > + }; > + > + /* GEN 1x2 GEN 2x1 */ > + opp-5000000 { > + opp-hz = /bits/ 64 <5000000>; > + required-opps = <&rpmhpd_opp_low_svs>; > + opp-peak-kBps = <500000 1>; > + }; > + > + /* GEN 2x2 */ > + opp-10000000 { > + opp-hz = /bits/ 64 <10000000>; > + required-opps = <&rpmhpd_opp_low_svs>; > + opp-peak-kBps = <1000000 1>; > + }; > + > + /* GEN 3x1 */ > + opp-8000000 { > + opp-hz = /bits/ 64 <8000000>; > + required-opps = <&rpmhpd_opp_nom>; > + opp-peak-kBps = <984500 1>; > + }; > + > + /* GEN 3x2 GEN 4x1 */ > + opp-16000000 { > + opp-hz = /bits/ 64 <16000000>; > + required-opps = <&rpmhpd_opp_nom>; > + opp-peak-kBps = <1969000 1>; > + }; > + > + /* GEN 4x2 */ > + opp-32000000 { > + opp-hz = /bits/ 64 <32000000>; > + required-opps = <&rpmhpd_opp_nom>; > + opp-peak-kBps = <3938000 1>; > + }; > + }; > + > }; > > pcie1_phy: phy@1c0e000 { > > -- > 2.42.0 >
diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi index 615296e13c43..881e5339cfff 100644 --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi @@ -1855,7 +1855,35 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, pinctrl-names = "default"; pinctrl-0 = <&pcie0_default_state>; + operating-points-v2 = <&pcie0_opp_table>; + status = "disabled"; + + pcie0_opp_table: opp-table { + compatible = "operating-points-v2"; + + /* GEN 1x1 */ + opp-2500000 { + opp-hz = /bits/ 64 <2500000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <250000 1>; + }; + + /* GEN 2x1 */ + opp-5000000 { + opp-hz = /bits/ 64 <5000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <500000 1>; + }; + + /* GEN 3x1 */ + opp-8000000 { + opp-hz = /bits/ 64 <8000000>; + required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <984500 1>; + }; + }; + }; pcie0_phy: phy@1c06000 { @@ -1982,7 +2010,56 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, pinctrl-names = "default"; pinctrl-0 = <&pcie1_default_state>; + operating-points-v2 = <&pcie1_opp_table>; + status = "disabled"; + + pcie1_opp_table: opp-table { + compatible = "operating-points-v2"; + + /* GEN 1x1 */ + opp-2500000 { + opp-hz = /bits/ 64 <2500000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <250000 1>; + }; + + /* GEN 1x2 GEN 2x1 */ + opp-5000000 { + opp-hz = /bits/ 64 <5000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <500000 1>; + }; + + /* GEN 2x2 */ + opp-10000000 { + opp-hz = /bits/ 64 <10000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <1000000 1>; + }; + + /* GEN 3x1 */ + opp-8000000 { + opp-hz = /bits/ 64 <8000000>; + required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <984500 1>; + }; + + /* GEN 3x2 GEN 4x1 */ + opp-16000000 { + opp-hz = /bits/ 64 <16000000>; + required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <1969000 1>; + }; + + /* GEN 4x2 */ + opp-32000000 { + opp-hz = /bits/ 64 <32000000>; + required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <3938000 1>; + }; + }; + }; pcie1_phy: phy@1c0e000 {
PCIe needs to choose the appropriate performance state of RPMH power domain and interconnect bandwidth based up on the PCIe gen speed. Add the OPP table support to specify RPMH performance states and interconnect peak bandwidth. Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com> --- arch/arm64/boot/dts/qcom/sm8450.dtsi | 77 ++++++++++++++++++++++++++++++++++++ 1 file changed, 77 insertions(+)