diff mbox series

[v2,1/2] dt-bindings: pinctrl: qcom,pmic-gpio: Allow gpio-hog nodes

Message ID 20240409-qcom-pmic-gpio-hog-v2-1-5ff812d2baed@z3ntu.xyz (mailing list archive)
State Not Applicable
Headers show
Series Allow gpio-hog nodes in qcom,pmic-gpio bindings (& dt fixup) | expand

Commit Message

Luca Weiss April 9, 2024, 6:36 p.m. UTC 
Allow specifying a GPIO hog, as already used on
qcom-msm8974-lge-nexus5-hammerhead.dts.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
 .../devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml          | 12 ++++++++++++
 1 file changed, 12 insertions(+)

Comments

Krzysztof Kozlowski April 10, 2024, 6:14 a.m. UTC | #1 
On 09/04/2024 20:36, Luca Weiss wrote:
> Allow specifying a GPIO hog, as already used on
> qcom-msm8974-lge-nexus5-hammerhead.dts.
> 
> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> ---
>  .../devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml          | 12 ++++++++++++
>  1 file changed, 12 insertions(+)


Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>

Best regards,
Krzysztof
Linus Walleij April 12, 2024, 8:29 a.m. UTC | #2 
On Tue, Apr 9, 2024 at 8:36 PM Luca Weiss <luca@z3ntu.xyz> wrote:

> Allow specifying a GPIO hog, as already used on
> qcom-msm8974-lge-nexus5-hammerhead.dts.
>
> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>

This patch applied to the pinctrl tree!

Yours,
Linus Walleij
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
index a786357ed1af..bd9471de0c69 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
@@ -424,6 +424,10 @@  patternProperties:
             $ref: "#/$defs/qcom-pmic-gpio-state"
         additionalProperties: false
 
+  "-hog(-[0-9]+)?$":
+    required:
+      - gpio-hog
+
 $defs:
   qcom-pmic-gpio-state:
     type: object
@@ -571,6 +575,7 @@  $defs:
 
 examples:
   - |
+    #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 
     pm8921_gpio: gpio@150 {
@@ -594,5 +599,12 @@  examples:
           power-source = <PM8921_GPIO_S4>;
         };
       };
+
+      otg-hog {
+        gpio-hog;
+        gpios = <35 GPIO_ACTIVE_HIGH>;
+        output-high;
+        line-name = "otg-gpio";
+      };
     };
 ...