diff mbox series

[3/3] slimbus: qcom-ngd-ctrl: use 'time_left' variable with wait_for_completion_timeout()

Message ID 20240430120102.29459-4-wsa+renesas@sang-engineering.com (mailing list archive)
State Not Applicable
Headers show
Series slimbus: use 'time_left' instead of 'timeout' with wait_for_*() functions | expand

Commit Message

Wolfram Sang April 30, 2024, 12:01 p.m. UTC 
There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_for_completion_timeout() causing patterns like:

	timeout = wait_for_completion_timeout(...)
	if (!timeout) return -ETIMEDOUT;

with all kinds of permutations. Use 'time_left' as a variable to make the code
self explaining.

Fix to the proper variable type 'unsigned long' while here.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
 drivers/slimbus/qcom-ngd-ctrl.c | 29 ++++++++++++++++-------------
 1 file changed, 16 insertions(+), 13 deletions(-)
diff mbox series

Patch

diff --git a/drivers/slimbus/qcom-ngd-ctrl.c b/drivers/slimbus/qcom-ngd-ctrl.c
index efeba8275a66..21b4008de4f3 100644
--- a/drivers/slimbus/qcom-ngd-ctrl.c
+++ b/drivers/slimbus/qcom-ngd-ctrl.c
@@ -789,7 +789,8 @@  static int qcom_slim_ngd_xfer_msg(struct slim_controller *sctrl,
 	struct qcom_slim_ngd_ctrl *ctrl = dev_get_drvdata(sctrl->dev);
 	DECLARE_COMPLETION_ONSTACK(tx_sent);
 	DECLARE_COMPLETION_ONSTACK(done);
-	int ret, timeout, i;
+	int ret, i;
+	unsigned long time_left;
 	u8 wbuf[SLIM_MSGQ_BUF_LEN];
 	u8 rbuf[SLIM_MSGQ_BUF_LEN];
 	u32 *pbuf;
@@ -891,8 +892,8 @@  static int qcom_slim_ngd_xfer_msg(struct slim_controller *sctrl,
 		return ret;
 	}
 
-	timeout = wait_for_completion_timeout(&tx_sent, HZ);
-	if (!timeout) {
+	time_left = wait_for_completion_timeout(&tx_sent, HZ);
+	if (!time_left) {
 		dev_err(sctrl->dev, "TX timed out:MC:0x%x,mt:0x%x", txn->mc,
 					txn->mt);
 		mutex_unlock(&ctrl->tx_lock);
@@ -900,8 +901,8 @@  static int qcom_slim_ngd_xfer_msg(struct slim_controller *sctrl,
 	}
 
 	if (usr_msg) {
-		timeout = wait_for_completion_timeout(&done, HZ);
-		if (!timeout) {
+		time_left = wait_for_completion_timeout(&done, HZ);
+		if (!time_left) {
 			dev_err(sctrl->dev, "TX timed out:MC:0x%x,mt:0x%x",
 				txn->mc, txn->mt);
 			mutex_unlock(&ctrl->tx_lock);
@@ -917,7 +918,8 @@  static int qcom_slim_ngd_xfer_msg_sync(struct slim_controller *ctrl,
 				       struct slim_msg_txn *txn)
 {
 	DECLARE_COMPLETION_ONSTACK(done);
-	int ret, timeout;
+	int ret;
+	unsigned long time_left;
 
 	ret = pm_runtime_get_sync(ctrl->dev);
 	if (ret < 0)
@@ -929,8 +931,8 @@  static int qcom_slim_ngd_xfer_msg_sync(struct slim_controller *ctrl,
 	if (ret)
 		goto pm_put;
 
-	timeout = wait_for_completion_timeout(&done, HZ);
-	if (!timeout) {
+	time_left = wait_for_completion_timeout(&done, HZ);
+	if (!time_left) {
 		dev_err(ctrl->dev, "TX timed out:MC:0x%x,mt:0x%x", txn->mc,
 				txn->mt);
 		ret = -ETIMEDOUT;
@@ -1169,11 +1171,12 @@  static int qcom_slim_ngd_power_up(struct qcom_slim_ngd_ctrl *ctrl)
 	enum qcom_slim_ngd_state cur_state = ctrl->state;
 	struct qcom_slim_ngd *ngd = ctrl->ngd;
 	u32 laddr, rx_msgq;
-	int timeout, ret = 0;
+	int ret = 0;
+	unsigned long time_left;
 
 	if (ctrl->state == QCOM_SLIM_NGD_CTRL_DOWN) {
-		timeout = wait_for_completion_timeout(&ctrl->qmi.qmi_comp, HZ);
-		if (!timeout)
+		time_left = wait_for_completion_timeout(&ctrl->qmi.qmi_comp, HZ);
+		if (!time_left)
 			return -EREMOTEIO;
 	}
 
@@ -1218,8 +1221,8 @@  static int qcom_slim_ngd_power_up(struct qcom_slim_ngd_ctrl *ctrl)
 				ngd->base + NGD_RX_MSGQ_CFG);
 	qcom_slim_ngd_setup(ctrl);
 
-	timeout = wait_for_completion_timeout(&ctrl->reconf, HZ);
-	if (!timeout) {
+	time_left = wait_for_completion_timeout(&ctrl->reconf, HZ);
+	if (!time_left) {
 		dev_err(ctrl->dev, "capability exchange timed-out\n");
 		return -ETIMEDOUT;
 	}