| Message ID | 20240529162958.18081-12-johan+linaro@kernel.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | arm64: dts: qcom: sc8280xp-x13s: enable pm8008 camera pmic | expand |
On Wed, May 29, 2024 at 06:29:55PM +0200, Johan Hovold wrote: > Rework the pm8008 binding by dropping internal details like register > offsets and interrupts and by adding the missing regulator and > temperature alarm properties. > > Note that child nodes are still used for pinctrl and regulator > configuration. > > Also note that the pinctrl state definition will be extended later and > could eventually also be shared with other PMICs (e.g. by breaking out > bits of qcom,pmic-gpio.yaml). This commit message should also state there are no users. > > Signed-off-by: Johan Hovold <johan+linaro@kernel.org> > --- > .../devicetree/bindings/mfd/qcom,pm8008.yaml | 149 +++++++++++------- > 1 file changed, 90 insertions(+), 59 deletions(-) > > diff --git a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml > index d71657f488db..ccf472e7f552 100644 > --- a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml > +++ b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml > @@ -27,103 +27,134 @@ properties: > reset-gpios: > maxItems: 1 > > - "#interrupt-cells": > + vdd-l1-l2-supply: true > + vdd-l3-l4-supply: true > + vdd-l5-supply: true > + vdd-l6-supply: true > + vdd-l7-supply: true > + > + gpio-controller: true > + > + "#gpio-cells": > const: 2 > > - description: | > - The first cell is the IRQ number, the second cell is the IRQ trigger > - flag. All interrupts are listed in include/dt-bindings/mfd/qcom-pm8008.h. > + gpio-ranges: > + maxItems: 1 > > interrupt-controller: true > > - "#address-cells": > - const: 1 > + "#interrupt-cells": > + const: 2 > > - "#size-cells": > + "#thermal-sensor-cells": > const: 0 > > -patternProperties: > - "^gpio@[0-9a-f]+$": > + pinctrl: > type: object > + additionalProperties: false > + patternProperties: > + "-state$": > + type: object > + $ref: "#/$defs/qcom-pm8008-pinctrl-state" There's only 1 reference to this, so just move the $def contents here. Rob
On Wed, May 29, 2024 at 06:29:55PM +0200, Johan Hovold wrote: > Rework the pm8008 binding by dropping internal details like register > offsets and interrupts and by adding the missing regulator and > temperature alarm properties. > > Note that child nodes are still used for pinctrl and regulator > configuration. > > Also note that the pinctrl state definition will be extended later and > could eventually also be shared with other PMICs (e.g. by breaking out > bits of qcom,pmic-gpio.yaml). Obviously we want to adapt this style of bindings for the other PMICs too. My main concern here are PMICs which have two kinds of controlled pins: GPIOs and MPPs. With the existing bindings style those are declared as two subdevices. What would be your suggested way to support MPPs with the proposed kind of bindings? > > Signed-off-by: Johan Hovold <johan+linaro@kernel.org> > --- > .../devicetree/bindings/mfd/qcom,pm8008.yaml | 149 +++++++++++------- > 1 file changed, 90 insertions(+), 59 deletions(-) > > diff --git a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml > index d71657f488db..ccf472e7f552 100644 > --- a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml > +++ b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml > @@ -27,103 +27,134 @@ properties: > reset-gpios: > maxItems: 1 > > - "#interrupt-cells": > + vdd-l1-l2-supply: true > + vdd-l3-l4-supply: true > + vdd-l5-supply: true > + vdd-l6-supply: true > + vdd-l7-supply: true > + > + gpio-controller: true > + > + "#gpio-cells": > const: 2 > > - description: | > - The first cell is the IRQ number, the second cell is the IRQ trigger > - flag. All interrupts are listed in include/dt-bindings/mfd/qcom-pm8008.h. > + gpio-ranges: > + maxItems: 1 > > interrupt-controller: true > > - "#address-cells": > - const: 1 > + "#interrupt-cells": > + const: 2 > > - "#size-cells": > + "#thermal-sensor-cells": > const: 0 > > -patternProperties: > - "^gpio@[0-9a-f]+$": > + pinctrl: > type: object > + additionalProperties: false > + patternProperties: > + "-state$": > + type: object > + $ref: "#/$defs/qcom-pm8008-pinctrl-state" > + unevaluatedProperties: false > > - description: | > - The GPIO peripheral. This node may be specified twice, one for each GPIO. > - > - properties: > - compatible: > - items: > - - const: qcom,pm8008-gpio > - - const: qcom,spmi-gpio > + regulators: > + type: object > + additionalProperties: false > + patternProperties: > + "^ldo[1-7]$": > + type: object > + $ref: /schemas/regulator/regulator.yaml# > + unevaluatedProperties: false > > - reg: > - description: Peripheral address of one of the two GPIO peripherals. > - maxItems: 1 > +required: > + - compatible > + - reg > + - interrupts > + - vdd-l1-l2-supply > + - vdd-l3-l4-supply > + - vdd-l5-supply > + - vdd-l6-supply > + - vdd-l7-supply > + - gpio-controller > + - "#gpio-cells" > + - gpio-ranges > + - interrupt-controller > + - "#interrupt-cells" > + - "#thermal-sensor-cells" > > - gpio-controller: true > +additionalProperties: false > > - gpio-ranges: > - maxItems: 1 > +$defs: > + qcom-pm8008-pinctrl-state: > + type: object > > - interrupt-controller: true > + allOf: > + - $ref: /schemas/pinctrl/pinmux-node.yaml > + - $ref: /schemas/pinctrl/pincfg-node.yaml > > - "#interrupt-cells": > - const: 2 > + properties: > + pins: > + items: > + pattern: "^gpio[12]$" > > - "#gpio-cells": > - const: 2 > + function: > + items: > + - enum: > + - normal > > required: > - - compatible > - - reg > - - gpio-controller > - - interrupt-controller > - - "#gpio-cells" > - - gpio-ranges > - - "#interrupt-cells" > + - pins > + - function > > additionalProperties: false > > -required: > - - compatible > - - reg > - - interrupts > - - "#address-cells" > - - "#size-cells" > - - "#interrupt-cells" > - > -additionalProperties: false > - > examples: > - | > #include <dt-bindings/gpio/gpio.h> > - #include <dt-bindings/mfd/qcom-pm8008.h> > #include <dt-bindings/interrupt-controller/irq.h> > > i2c { > #address-cells = <1>; > #size-cells = <0>; > > - pmic@8 { > + pm8008: pmic@8 { > compatible = "qcom,pm8008"; > reg = <0x8>; > - #address-cells = <1>; > - #size-cells = <0>; > - interrupt-controller; > - #interrupt-cells = <2>; > > interrupt-parent = <&tlmm>; > interrupts = <32 IRQ_TYPE_EDGE_RISING>; > > reset-gpios = <&tlmm 42 GPIO_ACTIVE_LOW>; > > - pm8008_gpios: gpio@c000 { > - compatible = "qcom,pm8008-gpio", "qcom,spmi-gpio"; > - reg = <0xc000>; > - gpio-controller; > - gpio-ranges = <&pm8008_gpios 0 0 2>; > - #gpio-cells = <2>; > - interrupt-controller; > - #interrupt-cells = <2>; > + vdd-l1-l2-supply = <&vreg_s8b_1p2>; > + vdd-l3-l4-supply = <&vreg_s1b_1p8>; > + vdd-l5-supply = <&vreg_bob>; > + vdd-l6-supply = <&vreg_bob>; > + vdd-l7-supply = <&vreg_bob>; > + > + gpio-controller; > + #gpio-cells = <2>; > + gpio-ranges = <&pm8008 0 0 2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + > + #thermal-sensor-cells = <0>; > + > + pinctrl { > + gpio-keys-state { > + pins = "gpio1"; > + function = "normal"; > + }; > + }; > + > + regulators { > + ldo1 { > + regulator-name = "vreg_l1"; > + regulator-min-microvolt = <950000>; > + regulator-max-microvolt = <1300000>; > + }; > }; > }; > }; > -- > 2.44.1 >
On Wed, Jun 05, 2024 at 11:43:16AM +0300, Dmitry Baryshkov wrote: > On Wed, May 29, 2024 at 06:29:55PM +0200, Johan Hovold wrote: > > Rework the pm8008 binding by dropping internal details like register > > offsets and interrupts and by adding the missing regulator and > > temperature alarm properties. > > > > Note that child nodes are still used for pinctrl and regulator > > configuration. > > > > Also note that the pinctrl state definition will be extended later and > > could eventually also be shared with other PMICs (e.g. by breaking out > > bits of qcom,pmic-gpio.yaml). > > Obviously we want to adapt this style of bindings for the other PMICs > too. My main concern here are PMICs which have two kinds of controlled > pins: GPIOs and MPPs. With the existing bindings style those are > declared as two subdevices. What would be your suggested way to support > MPPs with the proposed kind of bindings? As far as I understand newer PMICs do not have MPP blocks and we do not necessarily want to convert the existing bindings. That said, if there is ever a need to describe two separate gpio blocks this can, for example, be done using subnodes on those PMICs. Johan
On Sat, Jun 08, 2024 at 05:36:36PM +0200, Johan Hovold wrote: > On Wed, Jun 05, 2024 at 11:43:16AM +0300, Dmitry Baryshkov wrote: > > On Wed, May 29, 2024 at 06:29:55PM +0200, Johan Hovold wrote: > > > Rework the pm8008 binding by dropping internal details like register > > > offsets and interrupts and by adding the missing regulator and > > > temperature alarm properties. > > > > > > Note that child nodes are still used for pinctrl and regulator > > > configuration. > > > > > > Also note that the pinctrl state definition will be extended later and > > > could eventually also be shared with other PMICs (e.g. by breaking out > > > bits of qcom,pmic-gpio.yaml). > > > > Obviously we want to adapt this style of bindings for the other PMICs > > too. My main concern here are PMICs which have two kinds of controlled > > pins: GPIOs and MPPs. With the existing bindings style those are > > declared as two subdevices. What would be your suggested way to support > > MPPs with the proposed kind of bindings? > > As far as I understand newer PMICs do not have MPP blocks and we do not > necessarily want to convert the existing bindings. Well, I definitely want to do so. > That said, if there is ever a need to describe two separate gpio blocks > this can, for example, be done using subnodes on those PMICs. This creates an asymmetry between older and newer PMICs. Wouldn't it be better to always use gpios subnode for GPIO pins? This way older PMICS will use the same approach _plus_ mpps {} subnode instead of having either nothing or two subnodes. The same approach probably applies to some other subdevices: temp-alarm vs adc-tm, etc.
diff --git a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml index d71657f488db..ccf472e7f552 100644 --- a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml +++ b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml @@ -27,103 +27,134 @@ properties: reset-gpios: maxItems: 1 - "#interrupt-cells": + vdd-l1-l2-supply: true + vdd-l3-l4-supply: true + vdd-l5-supply: true + vdd-l6-supply: true + vdd-l7-supply: true + + gpio-controller: true + + "#gpio-cells": const: 2 - description: | - The first cell is the IRQ number, the second cell is the IRQ trigger - flag. All interrupts are listed in include/dt-bindings/mfd/qcom-pm8008.h. + gpio-ranges: + maxItems: 1 interrupt-controller: true - "#address-cells": - const: 1 + "#interrupt-cells": + const: 2 - "#size-cells": + "#thermal-sensor-cells": const: 0 -patternProperties: - "^gpio@[0-9a-f]+$": + pinctrl: type: object + additionalProperties: false + patternProperties: + "-state$": + type: object + $ref: "#/$defs/qcom-pm8008-pinctrl-state" + unevaluatedProperties: false - description: | - The GPIO peripheral. This node may be specified twice, one for each GPIO. - - properties: - compatible: - items: - - const: qcom,pm8008-gpio - - const: qcom,spmi-gpio + regulators: + type: object + additionalProperties: false + patternProperties: + "^ldo[1-7]$": + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false - reg: - description: Peripheral address of one of the two GPIO peripherals. - maxItems: 1 +required: + - compatible + - reg + - interrupts + - vdd-l1-l2-supply + - vdd-l3-l4-supply + - vdd-l5-supply + - vdd-l6-supply + - vdd-l7-supply + - gpio-controller + - "#gpio-cells" + - gpio-ranges + - interrupt-controller + - "#interrupt-cells" + - "#thermal-sensor-cells" - gpio-controller: true +additionalProperties: false - gpio-ranges: - maxItems: 1 +$defs: + qcom-pm8008-pinctrl-state: + type: object - interrupt-controller: true + allOf: + - $ref: /schemas/pinctrl/pinmux-node.yaml + - $ref: /schemas/pinctrl/pincfg-node.yaml - "#interrupt-cells": - const: 2 + properties: + pins: + items: + pattern: "^gpio[12]$" - "#gpio-cells": - const: 2 + function: + items: + - enum: + - normal required: - - compatible - - reg - - gpio-controller - - interrupt-controller - - "#gpio-cells" - - gpio-ranges - - "#interrupt-cells" + - pins + - function additionalProperties: false -required: - - compatible - - reg - - interrupts - - "#address-cells" - - "#size-cells" - - "#interrupt-cells" - -additionalProperties: false - examples: - | #include <dt-bindings/gpio/gpio.h> - #include <dt-bindings/mfd/qcom-pm8008.h> #include <dt-bindings/interrupt-controller/irq.h> i2c { #address-cells = <1>; #size-cells = <0>; - pmic@8 { + pm8008: pmic@8 { compatible = "qcom,pm8008"; reg = <0x8>; - #address-cells = <1>; - #size-cells = <0>; - interrupt-controller; - #interrupt-cells = <2>; interrupt-parent = <&tlmm>; interrupts = <32 IRQ_TYPE_EDGE_RISING>; reset-gpios = <&tlmm 42 GPIO_ACTIVE_LOW>; - pm8008_gpios: gpio@c000 { - compatible = "qcom,pm8008-gpio", "qcom,spmi-gpio"; - reg = <0xc000>; - gpio-controller; - gpio-ranges = <&pm8008_gpios 0 0 2>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; + vdd-l1-l2-supply = <&vreg_s8b_1p2>; + vdd-l3-l4-supply = <&vreg_s1b_1p8>; + vdd-l5-supply = <&vreg_bob>; + vdd-l6-supply = <&vreg_bob>; + vdd-l7-supply = <&vreg_bob>; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pm8008 0 0 2>; + + interrupt-controller; + #interrupt-cells = <2>; + + #thermal-sensor-cells = <0>; + + pinctrl { + gpio-keys-state { + pins = "gpio1"; + function = "normal"; + }; + }; + + regulators { + ldo1 { + regulator-name = "vreg_l1"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1300000>; + }; }; }; };
Rework the pm8008 binding by dropping internal details like register offsets and interrupts and by adding the missing regulator and temperature alarm properties. Note that child nodes are still used for pinctrl and regulator configuration. Also note that the pinctrl state definition will be extended later and could eventually also be shared with other PMICs (e.g. by breaking out bits of qcom,pmic-gpio.yaml). Signed-off-by: Johan Hovold <johan+linaro@kernel.org> --- .../devicetree/bindings/mfd/qcom,pm8008.yaml | 149 +++++++++++------- 1 file changed, 90 insertions(+), 59 deletions(-)