diff mbox series

[v6,4/6] drm/msm/dsi: set video mode widebus enable bit when widebus is enabled

Message ID 20240530-msm-drm-dsc-dsi-video-upstream-4-v6-4-2ab1d334c657@linaro.org (mailing list archive)
State Not Applicable
Headers show
Series Add DSC support to DSI video panel | expand

Commit Message

Jun Nie May 30, 2024, 5:56 a.m. UTC 
From: Jonathan Marek <jonathan@marek.ca>

The value returned by msm_dsi_wide_bus_enabled() doesn't match what the
driver is doing in video mode. Fix that by actually enabling widebus for
video mode.

Fixes: efcbd6f9cdeb ("drm/msm/dsi: Enable widebus for DSI")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
---
 drivers/gpu/drm/msm/dsi/dsi_host.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
index a50f4dda5941..47f5858334f6 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_host.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
@@ -754,6 +754,8 @@  static void dsi_ctrl_enable(struct msm_dsi_host *msm_host,
 		data |= DSI_VID_CFG0_TRAFFIC_MODE(dsi_get_traffic_mode(flags));
 		data |= DSI_VID_CFG0_DST_FORMAT(dsi_get_vid_fmt(mipi_fmt));
 		data |= DSI_VID_CFG0_VIRT_CHANNEL(msm_host->channel);
+		if (msm_dsi_host_is_wide_bus_enabled(&msm_host->base))
+			data |= DSI_VID_CFG0_DATABUS_WIDEN;
 		dsi_write(msm_host, REG_DSI_VID_CFG0, data);
 
 		/* Do not swap RGB colors */
@@ -778,7 +780,6 @@  static void dsi_ctrl_enable(struct msm_dsi_host *msm_host,
 			if (cfg_hnd->minor >= MSM_DSI_6G_VER_MINOR_V1_3)
 				data |= DSI_CMD_MODE_MDP_CTRL2_BURST_MODE;
 
-			/* TODO: Allow for video-mode support once tested/fixed */
 			if (msm_dsi_host_is_wide_bus_enabled(&msm_host->base))
 				data |= DSI_CMD_MODE_MDP_CTRL2_DATABUS_WIDEN;