| Message ID | 20240531-x1e80100-dts-fixes-pcie6a-v1-1-1573ebcae1e8@linaro.org (mailing list archive) |
|---|---|
| State | Changes Requested |
| Headers | show |
| Series | arm64: dts: qcom: x1e80100: Fix the PCIe 6a node | expand |
On 5/31/24 19:00, Abel Vesa wrote: > The actual size of the DBI region is 0xf20 and the start of the > ELBI region is 0xf40, according to the documentation. So fix them. > While at it, add the MHI region as well. > > Fixes: 5eb83fc10289 ("arm64: dts: qcom: x1e80100: Add PCIe nodes") > Signed-off-by: Abel Vesa <abel.vesa@linaro.org> > --- There's a lot going on... but I suppose the change reflects the commit message and that I suppose reflects reality Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Konrad
diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi index cf8d8d5b1870..fe7ca2a73f9d 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi +++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi @@ -2818,15 +2818,17 @@ pcie6a: pci@1bf8000 { device_type = "pci"; compatible = "qcom,pcie-x1e80100"; reg = <0 0x01bf8000 0 0x3000>, - <0 0x70000000 0 0xf1d>, - <0 0x70000f20 0 0xa8>, + <0 0x70000000 0 0xf20>, + <0 0x70000f40 0 0xa8>, <0 0x70001000 0 0x1000>, - <0 0x70100000 0 0x100000>; + <0 0x70100000 0 0x100000>, + <0 0x01bfb000 0 0x1000>; reg-names = "parf", "dbi", "elbi", "atu", - "config"; + "config", + "mhi"; #address-cells = <3>; #size-cells = <2>; ranges = <0x01000000 0 0x00000000 0 0x70200000 0 0x100000>,
The actual size of the DBI region is 0xf20 and the start of the ELBI region is 0xf40, according to the documentation. So fix them. While at it, add the MHI region as well. Fixes: 5eb83fc10289 ("arm64: dts: qcom: x1e80100: Add PCIe nodes") Signed-off-by: Abel Vesa <abel.vesa@linaro.org> --- arch/arm64/boot/dts/qcom/x1e80100.dtsi | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-)