diff mbox series

[2/2] pinctrl: qcom: Introduce SM4250 LPI pinctrl driver

Message ID 20240606130323.138970-3-srinivas.kandagatla@linaro.org (mailing list archive)
State Superseded
Headers show
Series pinctrl: qcom: add sm4250 lpi pinctrl | expand

Commit Message

Srinivas Kandagatla June 6, 2024, 1:03 p.m. UTC
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

Add support for the pin controller block on SM4250 Low Power Island.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
 drivers/pinctrl/qcom/Kconfig                  |   9 +
 drivers/pinctrl/qcom/Makefile                 |   1 +
 .../pinctrl/qcom/pinctrl-sm4250-lpass-lpi.c   | 191 ++++++++++++++++++
 3 files changed, 201 insertions(+)
 create mode 100644 drivers/pinctrl/qcom/pinctrl-sm4250-lpass-lpi.c

Comments

Krzysztof Kozlowski June 7, 2024, 7:39 a.m. UTC | #1
On 06/06/2024 15:03, srinivas.kandagatla@linaro.org wrote:
> From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> 
> Add support for the pin controller block on SM4250 Low Power Island.
> 
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof
kernel test robot June 7, 2024, 10:12 p.m. UTC | #2
Hi,

kernel test robot noticed the following build warnings:

[auto build test WARNING on linusw-pinctrl/devel]
[also build test WARNING on linusw-pinctrl/for-next linus/master v6.10-rc2 next-20240607]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/srinivas-kandagatla-linaro-org/dt-bindings-pinctrl-qcom-Add-SM4250-pinctrl/20240606-210728
base:   https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl.git devel
patch link:    https://lore.kernel.org/r/20240606130323.138970-3-srinivas.kandagatla%40linaro.org
patch subject: [PATCH 2/2] pinctrl: qcom: Introduce SM4250 LPI pinctrl driver
config: sh-randconfig-r131-20240608 (https://download.01.org/0day-ci/archive/20240608/202406080514.8Yq3kzQr-lkp@intel.com/config)
compiler: sh4-linux-gcc (GCC) 13.2.0
reproduce: (https://download.01.org/0day-ci/archive/20240608/202406080514.8Yq3kzQr-lkp@intel.com/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202406080514.8Yq3kzQr-lkp@intel.com/

sparse warnings: (new ones prefixed by >>)
>> drivers/pinctrl/qcom/pinctrl-sm4250-lpass-lpi.c:135:9: sparse: sparse: Initializer entry defined twice
   drivers/pinctrl/qcom/pinctrl-sm4250-lpass-lpi.c:158:9: sparse:   also defined here

vim +135 drivers/pinctrl/qcom/pinctrl-sm4250-lpass-lpi.c

   125	
   126	static const struct lpi_function sm4250_functions[] = {
   127		LPI_FUNCTION(dmic01_clk),
   128		LPI_FUNCTION(dmic01_data),
   129		LPI_FUNCTION(dmic23_clk),
   130		LPI_FUNCTION(dmic23_data),
   131		LPI_FUNCTION(dmic4_clk),
   132		LPI_FUNCTION(dmic4_data),
   133		LPI_FUNCTION(ext_mclk0_a),
   134		LPI_FUNCTION(ext_mclk0_b),
 > 135		LPI_FUNCTION(ext_mclk1_a),
   136		LPI_FUNCTION(ext_mclk1_b),
   137		LPI_FUNCTION(ext_mclk1_c),
   138		LPI_FUNCTION(i2s1_clk),
   139		LPI_FUNCTION(i2s1_data),
   140		LPI_FUNCTION(i2s1_ws),
   141		LPI_FUNCTION(i2s2_clk),
   142		LPI_FUNCTION(i2s2_data),
   143		LPI_FUNCTION(i2s2_ws),
   144		LPI_FUNCTION(i2s3_clk),
   145		LPI_FUNCTION(i2s3_data),
   146		LPI_FUNCTION(i2s3_ws),
   147		LPI_FUNCTION(qua_mi2s_data),
   148		LPI_FUNCTION(qua_mi2s_sclk),
   149		LPI_FUNCTION(slim_clk),
   150		LPI_FUNCTION(slim_data),
   151		LPI_FUNCTION(qua_mi2s_ws),
   152		LPI_FUNCTION(swr_rx_clk),
   153		LPI_FUNCTION(swr_rx_data),
   154		LPI_FUNCTION(swr_tx_clk),
   155		LPI_FUNCTION(swr_tx_data),
   156		LPI_FUNCTION(swr_wsa_clk),
   157		LPI_FUNCTION(swr_wsa_data),
   158		LPI_FUNCTION(ext_mclk1_a),
   159		LPI_FUNCTION(ext_mclk1_a),
   160		LPI_FUNCTION(ext_mclk1_a),
   161		LPI_FUNCTION(ext_mclk1_a),
   162	};
   163
diff mbox series

Patch

diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig
index 24619e80b2cc..dd9bbe8f3e11 100644
--- a/drivers/pinctrl/qcom/Kconfig
+++ b/drivers/pinctrl/qcom/Kconfig
@@ -68,6 +68,15 @@  config PINCTRL_SC7280_LPASS_LPI
 	  Qualcomm Technologies Inc LPASS (Low Power Audio SubSystem) LPI
 	  (Low Power Island) found on the Qualcomm Technologies Inc SC7280 platform.
 
+config PINCTRL_SM4250_LPASS_LPI
+	tristate "Qualcomm Technologies Inc SM4250 LPASS LPI pin controller driver"
+	depends on ARM64 || COMPILE_TEST
+	depends on PINCTRL_LPASS_LPI
+	help
+	  This is the pinctrl, pinmux, pinconf and gpiolib driver for the
+	  Qualcomm Technologies Inc LPASS (Low Power Audio SubSystem) LPI
+	  (Low Power Island) found on the Qualcomm Technologies Inc SM4250 platform.
+
 config PINCTRL_SM6115_LPASS_LPI
 	tristate "Qualcomm Technologies Inc SM6115 LPASS LPI pin controller driver"
 	depends on ARM64 || COMPILE_TEST
diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile
index e2e76071d268..eb04297b6388 100644
--- a/drivers/pinctrl/qcom/Makefile
+++ b/drivers/pinctrl/qcom/Makefile
@@ -43,6 +43,7 @@  obj-$(CONFIG_PINCTRL_SDM845) += pinctrl-sdm845.o
 obj-$(CONFIG_PINCTRL_SDX55) += pinctrl-sdx55.o
 obj-$(CONFIG_PINCTRL_SDX65) += pinctrl-sdx65.o
 obj-$(CONFIG_PINCTRL_SDX75) += pinctrl-sdx75.o
+obj-$(CONFIG_PINCTRL_SM4250_LPASS_LPI) += pinctrl-sm4250-lpass-lpi.o
 obj-$(CONFIG_PINCTRL_SM4450) += pinctrl-sm4450.o
 obj-$(CONFIG_PINCTRL_SM6115) += pinctrl-sm6115.o
 obj-$(CONFIG_PINCTRL_SM6115_LPASS_LPI) += pinctrl-sm6115-lpass-lpi.o
diff --git a/drivers/pinctrl/qcom/pinctrl-sm4250-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-sm4250-lpass-lpi.c
new file mode 100644
index 000000000000..6c5d09241e82
--- /dev/null
+++ b/drivers/pinctrl/qcom/pinctrl-sm4250-lpass-lpi.c
@@ -0,0 +1,191 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2016-2019, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2020, 2023 Linaro Ltd.
+ */
+
+#include <linux/gpio/driver.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include "pinctrl-lpass-lpi.h"
+
+enum lpass_lpi_functions {
+	LPI_MUX_dmic01_clk,
+	LPI_MUX_dmic01_data,
+	LPI_MUX_dmic23_clk,
+	LPI_MUX_dmic23_data,
+	LPI_MUX_dmic4_clk,
+	LPI_MUX_dmic4_data,
+	LPI_MUX_ext_mclk0_a,
+	LPI_MUX_ext_mclk0_b,
+	LPI_MUX_ext_mclk1_a,
+	LPI_MUX_ext_mclk1_b,
+	LPI_MUX_ext_mclk1_c,
+	LPI_MUX_i2s1_clk,
+	LPI_MUX_i2s1_data,
+	LPI_MUX_i2s1_ws,
+	LPI_MUX_i2s2_clk,
+	LPI_MUX_i2s2_data,
+	LPI_MUX_i2s2_ws,
+	LPI_MUX_i2s3_clk,
+	LPI_MUX_i2s3_data,
+	LPI_MUX_i2s3_ws,
+	LPI_MUX_qua_mi2s_data,
+	LPI_MUX_qua_mi2s_sclk,
+	LPI_MUX_qua_mi2s_ws,
+	LPI_MUX_slim_clk,
+	LPI_MUX_slim_data,
+	LPI_MUX_swr_rx_clk,
+	LPI_MUX_swr_rx_data,
+	LPI_MUX_swr_tx_clk,
+	LPI_MUX_swr_tx_data,
+	LPI_MUX_swr_wsa_clk,
+	LPI_MUX_swr_wsa_data,
+	LPI_MUX_gpio,
+	LPI_MUX__,
+};
+
+static const struct pinctrl_pin_desc sm4250_lpi_pins[] = {
+	PINCTRL_PIN(0, "gpio0"),
+	PINCTRL_PIN(1, "gpio1"),
+	PINCTRL_PIN(2, "gpio2"),
+	PINCTRL_PIN(3, "gpio3"),
+	PINCTRL_PIN(4, "gpio4"),
+	PINCTRL_PIN(5, "gpio5"),
+	PINCTRL_PIN(6, "gpio6"),
+	PINCTRL_PIN(7, "gpio7"),
+	PINCTRL_PIN(8, "gpio8"),
+	PINCTRL_PIN(9, "gpio9"),
+	PINCTRL_PIN(10, "gpio10"),
+	PINCTRL_PIN(11, "gpio11"),
+	PINCTRL_PIN(12, "gpio12"),
+	PINCTRL_PIN(13, "gpio13"),
+	PINCTRL_PIN(14, "gpio14"),
+	PINCTRL_PIN(15, "gpio15"),
+	PINCTRL_PIN(16, "gpio16"),
+	PINCTRL_PIN(17, "gpio17"),
+	PINCTRL_PIN(18, "gpio18"),
+};
+
+static const char * const dmic01_clk_groups[] = { "gpio6" };
+static const char * const dmic01_data_groups[] = { "gpio7" };
+static const char * const dmic23_clk_groups[] = { "gpio8" };
+static const char * const dmic23_data_groups[] = { "gpio9" };
+static const char * const dmic4_clk_groups[] = { "gpio10" };
+static const char * const dmic4_data_groups[] = { "gpio11" };
+static const char * const ext_mclk0_a_groups[] = { "gpio13" };
+static const char * const ext_mclk0_b_groups[] = { "gpio5" };
+static const char * const ext_mclk1_a_groups[] = { "gpio18" };
+static const char * const ext_mclk1_b_groups[] = { "gpio9" };
+static const char * const ext_mclk1_c_groups[] = { "gpio17" };
+static const char * const slim_clk_groups[] = { "gpio14" };
+static const char * const slim_data_groups[] = { "gpio15" };
+static const char * const i2s1_clk_groups[] = { "gpio6" };
+static const char * const i2s1_data_groups[] = { "gpio8", "gpio9" };
+static const char * const i2s1_ws_groups[] = { "gpio7" };
+static const char * const i2s2_clk_groups[] = { "gpio10" };
+static const char * const i2s2_data_groups[] = { "gpio12", "gpio13" };
+static const char * const i2s2_ws_groups[] = { "gpio11" };
+static const char * const i2s3_clk_groups[] = { "gpio14" };
+static const char * const i2s3_data_groups[] = { "gpio16", "gpio17" };
+static const char * const i2s3_ws_groups[] = { "gpio15" };
+static const char * const qua_mi2s_data_groups[] = { "gpio2", "gpio3", "gpio4", "gpio5" };
+static const char * const qua_mi2s_sclk_groups[] = { "gpio0" };
+static const char * const qua_mi2s_ws_groups[] = { "gpio1" };
+static const char * const swr_rx_clk_groups[] = { "gpio3" };
+static const char * const swr_rx_data_groups[] = { "gpio4", "gpio5" };
+static const char * const swr_tx_clk_groups[] = { "gpio0" };
+static const char * const swr_tx_data_groups[] = { "gpio1", "gpio2" };
+static const char * const swr_wsa_clk_groups[] = { "gpio10" };
+static const char * const swr_wsa_data_groups[] = { "gpio11" };
+
+
+static const struct lpi_pingroup sm4250_groups[] = {
+	LPI_PINGROUP(0, 0, swr_tx_clk, qua_mi2s_sclk, _, _),
+	LPI_PINGROUP(1, 2, swr_tx_data, qua_mi2s_ws, _, _),
+	LPI_PINGROUP(2, 4, swr_tx_data, qua_mi2s_data, _, _),
+	LPI_PINGROUP(3, 8, swr_rx_clk, qua_mi2s_data, _, _),
+	LPI_PINGROUP(4, 10, swr_rx_data, qua_mi2s_data, _, _),
+	LPI_PINGROUP(5, 12, swr_rx_data, ext_mclk0_b, qua_mi2s_data, _),
+	LPI_PINGROUP(6, LPI_NO_SLEW, dmic01_clk, i2s1_clk, _, _),
+	LPI_PINGROUP(7, LPI_NO_SLEW, dmic01_data, i2s1_ws, _, _),
+	LPI_PINGROUP(8, LPI_NO_SLEW, dmic23_clk, i2s1_data, _, _),
+	LPI_PINGROUP(9, LPI_NO_SLEW, dmic23_data, i2s1_data, ext_mclk1_b, _),
+	LPI_PINGROUP(10, 16, i2s2_clk, swr_wsa_clk, dmic4_clk, _),
+	LPI_PINGROUP(11, 18, i2s2_ws, swr_wsa_data, dmic4_data, _),
+	LPI_PINGROUP(12, LPI_NO_SLEW, dmic23_clk, i2s2_data, _, _),
+	LPI_PINGROUP(13, LPI_NO_SLEW, dmic23_data, i2s2_data, ext_mclk0_a, _),
+	LPI_PINGROUP(14, LPI_NO_SLEW, i2s3_clk, slim_clk, _, _),
+	LPI_PINGROUP(15, LPI_NO_SLEW, i2s3_ws, slim_data, _, _),
+	LPI_PINGROUP(16, LPI_NO_SLEW, i2s3_data, _, _, _),
+	LPI_PINGROUP(17, LPI_NO_SLEW, i2s3_data, ext_mclk1_c, _, _),
+	LPI_PINGROUP(18, 20, ext_mclk1_a, swr_rx_data, _, _),
+};
+
+static const struct lpi_function sm4250_functions[] = {
+	LPI_FUNCTION(dmic01_clk),
+	LPI_FUNCTION(dmic01_data),
+	LPI_FUNCTION(dmic23_clk),
+	LPI_FUNCTION(dmic23_data),
+	LPI_FUNCTION(dmic4_clk),
+	LPI_FUNCTION(dmic4_data),
+	LPI_FUNCTION(ext_mclk0_a),
+	LPI_FUNCTION(ext_mclk0_b),
+	LPI_FUNCTION(ext_mclk1_a),
+	LPI_FUNCTION(ext_mclk1_b),
+	LPI_FUNCTION(ext_mclk1_c),
+	LPI_FUNCTION(i2s1_clk),
+	LPI_FUNCTION(i2s1_data),
+	LPI_FUNCTION(i2s1_ws),
+	LPI_FUNCTION(i2s2_clk),
+	LPI_FUNCTION(i2s2_data),
+	LPI_FUNCTION(i2s2_ws),
+	LPI_FUNCTION(i2s3_clk),
+	LPI_FUNCTION(i2s3_data),
+	LPI_FUNCTION(i2s3_ws),
+	LPI_FUNCTION(qua_mi2s_data),
+	LPI_FUNCTION(qua_mi2s_sclk),
+	LPI_FUNCTION(slim_clk),
+	LPI_FUNCTION(slim_data),
+	LPI_FUNCTION(qua_mi2s_ws),
+	LPI_FUNCTION(swr_rx_clk),
+	LPI_FUNCTION(swr_rx_data),
+	LPI_FUNCTION(swr_tx_clk),
+	LPI_FUNCTION(swr_tx_data),
+	LPI_FUNCTION(swr_wsa_clk),
+	LPI_FUNCTION(swr_wsa_data),
+	LPI_FUNCTION(ext_mclk1_a),
+	LPI_FUNCTION(ext_mclk1_a),
+	LPI_FUNCTION(ext_mclk1_a),
+	LPI_FUNCTION(ext_mclk1_a),
+};
+
+static const struct lpi_pinctrl_variant_data sm4250_lpi_data = {
+	.pins = sm4250_lpi_pins,
+	.npins = ARRAY_SIZE(sm4250_lpi_pins),
+	.groups = sm4250_groups,
+	.ngroups = ARRAY_SIZE(sm4250_groups),
+	.functions = sm4250_functions,
+	.nfunctions = ARRAY_SIZE(sm4250_functions),
+};
+
+static const struct of_device_id lpi_pinctrl_of_match[] = {
+	{ .compatible = "qcom,sm4250-lpass-lpi-pinctrl", .data = &sm4250_lpi_data },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, lpi_pinctrl_of_match);
+
+static struct platform_driver lpi_pinctrl_driver = {
+	.driver = {
+		.name = "qcom-sm4250-lpass-lpi-pinctrl",
+		.of_match_table = lpi_pinctrl_of_match,
+	},
+	.probe = lpi_pinctrl_probe,
+	.remove_new = lpi_pinctrl_remove,
+};
+
+module_platform_driver(lpi_pinctrl_driver);
+MODULE_DESCRIPTION("QTI SM4250 LPI GPIO pin control driver");
+MODULE_AUTHOR("Srinivas Kandagatla <srinivas.kandagatla@linaro.org>");
+MODULE_LICENSE("GPL");