diff mbox series

soc: qcom: pmic_glink: disable UCSI on sc8280xp

Message ID 20240608114529.23060-1-johan+linaro@kernel.org (mailing list archive)
State Accepted
Commit ad3dd9592b2a1d2f9e6ffeedfd81602f91f1ba09
Headers show
Series soc: qcom: pmic_glink: disable UCSI on sc8280xp | expand

Commit Message

Johan Hovold June 8, 2024, 11:45 a.m. UTC
Disconnecting an external display triggers a hypervisor reset on the
Lenovo ThinkPad X13s since 6.10-rc1 which enabled UCSI. Disable it again
until the regression has been fixed properly.

Fixes: 3f91a0bf4a0b ("soc: qcom: pmic_glink: reenable UCSI on sc8280xp")
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
 drivers/soc/qcom/pmic_glink.c | 4 ++++
 1 file changed, 4 insertions(+)


Dmitry reported off-list that his X13s was crashing when he disconnected
an external display and I tracked it down to the enablement of UCSI in
6.10-rc1.

I have not had time to debug this further, but I'm flagging this as a
regression and sending an effective so that we have a fall back in case
this is not fixed in timely manner.

Note that this likely affects other Qualcomm SoCs as well.

Johan


#regzbot introduced: 3f91a0bf4a0b

Comments

Heikki Krogerus June 11, 2024, 8:52 a.m. UTC | #1
On Sat, Jun 08, 2024 at 01:45:29PM +0200, Johan Hovold wrote:
> Disconnecting an external display triggers a hypervisor reset on the
> Lenovo ThinkPad X13s since 6.10-rc1 which enabled UCSI. Disable it again
> until the regression has been fixed properly.
> 
> Fixes: 3f91a0bf4a0b ("soc: qcom: pmic_glink: reenable UCSI on sc8280xp")
> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>

Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>

> ---
>  drivers/soc/qcom/pmic_glink.c | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> 
> Dmitry reported off-list that his X13s was crashing when he disconnected
> an external display and I tracked it down to the enablement of UCSI in
> 6.10-rc1.
> 
> I have not had time to debug this further, but I'm flagging this as a
> regression and sending an effective so that we have a fall back in case
> this is not fixed in timely manner.
> 
> Note that this likely affects other Qualcomm SoCs as well.
> 
> Johan
> 
> 
> #regzbot introduced: 3f91a0bf4a0b
> 
> 
> 
> diff --git a/drivers/soc/qcom/pmic_glink.c b/drivers/soc/qcom/pmic_glink.c
> index 40fb09d69014..65279243072c 100644
> --- a/drivers/soc/qcom/pmic_glink.c
> +++ b/drivers/soc/qcom/pmic_glink.c
> @@ -348,11 +348,15 @@ static void pmic_glink_remove(struct platform_device *pdev)
>  	mutex_unlock(&__pmic_glink_lock);
>  }
>  
> +static const unsigned long pmic_glink_sc8280xp_client_mask = BIT(PMIC_GLINK_CLIENT_BATT) |
> +							     BIT(PMIC_GLINK_CLIENT_ALTMODE);
> +
>  static const unsigned long pmic_glink_sm8450_client_mask = BIT(PMIC_GLINK_CLIENT_BATT) |
>  							   BIT(PMIC_GLINK_CLIENT_ALTMODE) |
>  							   BIT(PMIC_GLINK_CLIENT_UCSI);
>  
>  static const struct of_device_id pmic_glink_of_match[] = {
> +	{ .compatible = "qcom,sc8280xp-pmic-glink", .data = &pmic_glink_sc8280xp_client_mask },
>  	{ .compatible = "qcom,pmic-glink", .data = &pmic_glink_sm8450_client_mask },
>  	{}
>  };
> -- 
> 2.44.1
Bjorn Andersson June 14, 2024, 10:48 p.m. UTC | #2
On Sat, 08 Jun 2024 13:45:29 +0200, Johan Hovold wrote:
> Disconnecting an external display triggers a hypervisor reset on the
> Lenovo ThinkPad X13s since 6.10-rc1 which enabled UCSI. Disable it again
> until the regression has been fixed properly.
> 
> 

Applied, thanks!

[1/1] soc: qcom: pmic_glink: disable UCSI on sc8280xp
      commit: ad3dd9592b2a1d2f9e6ffeedfd81602f91f1ba09

Best regards,
diff mbox series

Patch

diff --git a/drivers/soc/qcom/pmic_glink.c b/drivers/soc/qcom/pmic_glink.c
index 40fb09d69014..65279243072c 100644
--- a/drivers/soc/qcom/pmic_glink.c
+++ b/drivers/soc/qcom/pmic_glink.c
@@ -348,11 +348,15 @@  static void pmic_glink_remove(struct platform_device *pdev)
 	mutex_unlock(&__pmic_glink_lock);
 }
 
+static const unsigned long pmic_glink_sc8280xp_client_mask = BIT(PMIC_GLINK_CLIENT_BATT) |
+							     BIT(PMIC_GLINK_CLIENT_ALTMODE);
+
 static const unsigned long pmic_glink_sm8450_client_mask = BIT(PMIC_GLINK_CLIENT_BATT) |
 							   BIT(PMIC_GLINK_CLIENT_ALTMODE) |
 							   BIT(PMIC_GLINK_CLIENT_UCSI);
 
 static const struct of_device_id pmic_glink_of_match[] = {
+	{ .compatible = "qcom,sc8280xp-pmic-glink", .data = &pmic_glink_sc8280xp_client_mask },
 	{ .compatible = "qcom,pmic-glink", .data = &pmic_glink_sm8450_client_mask },
 	{}
 };